A theoretical study on ultrasonic guide waves generated by a pulsed laser was presented, using the finite element method (FEM).
利用有限元法(FEM)对板状金属材料中脉冲激光激发的超声导波进行了理论研究。
This paper studies the stability of arch abutment by using the finite element method.
本文采用有限元法,研究了拱坝坝肩稳定问题。
In this paper, using the finite element method, we discuss the two-grid methods for two simplified models.
本文针对二维三温辐射热传导方程的两种简化模型的有限元方程,讨论了两层网格方法。
In this paper, we give an analysis for friction-free interference fit bolt using the finite element method.
本文采用有限元素方法在螺纹面无摩擦力的条件下对过盈配合的螺栓、螺母进行了分析计算。
In this paper, using the finite element method, we completed the computation of static rigidity for a lathe bed.
本文介绍采用有限元法计算车床床身的静刚度。
The main magnetic field of Magnetic Resonace Imaging( MRI)device is simulated by using the finite element method.
采取了二维有限元法模拟核磁共振成像(MRI)装置的主磁场。
In this paper, we performed modelling of DC resistivity sounding in tunnel using the finite element method (FEM).
本文用有限单元法对坑道内的直流电阻率测深进行数值模拟计算。
Factors influencing the stress distribution in prestressed cables were analyzed by using the finite element method.
采用有限元法,研究预应力锚索锚固段应力分布的影响因素。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法,分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
Based on cutting and vibrating theories, the dynamic behavior of micro drill is studied by using the finite element method.
基于切削和振动理论,利用有限元技术对微细钻头振动钻入动力学特性进行了深入地研究。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法,建立了横流式农用清选风机内部的气体流动数值模拟模型。
The experimental results were used to calculate material properties, using the finite element method combined with optimization techniques.
该方法根据实测的客观物理量集成运用有限元方法和优化技术来测算材料的弹性参数。
By using the finite element method, this paper carried through the 2-d FEM calculation of an actual engineering that is Jinan east lake dam.
本文应用有限元法针对具体工程——济南市东湖水库大坝进行了二维数值分析。
By using the finite element method (FEM) software, the vibration of 3-d finite element model of maxillary central incisor tooth was analyzed.
在三维有限元模型的基础上,利用有限元分析软件对上颌中切牙的振动模态进行了分析。
A static analysis of the ribbed shell of revolution made of composite materials by using the finite element method is presented in this paper.
本文用有限元法研究了加肋和复合材料弹性旋转薄壳的静力问题。
For special structural parts, such as guide vanes and elbows etc., the critical pressure has been determined by using the finite element method.
对导叶弯头等特殊结构部件,应用有限元法确定了临界压力。
A computer model for the mechanical response of steel bridge deck surfacing under wheel loading is established by using the finite element method.
采用有限元方法建立在车载作用下钢桥面铺装层的力学响应计算模型。
The authors, using the finite element method, analyse the rules of continuous deep beam internal forces under the influence of the support plate width.
作者以有限元法分析了连续深梁的内力受支座垫板宽度影响的变化规律;
A modal analysis using the finite element method is carried out for a crankshaft workpiece system. Six lowest order modal 'parameters have been obtained.
本文用有限元方法对曲轴工件系统进行了模态分析,求出了前六阶模态参数。
The predicted transmission loss of perforated tube silencers using the finite element method and experimental results are compared and showed good agreement.
使用有限元法计算穿孔管消声器的传递损失,并与实验测量结果进行了比较,二者吻合良好。
The study of the effectiveness of the dynamic vibration absorber in reducing harmonic response of the ship hull girder using the finite element method is presented.
采用有限元法研究了动力吸振器减小船体梁结构谐波振动响应的有效性。
According to the measured results, a reasonable boundary condition can be set up and then the field distribution can be calculated by using the finite element method.
按测量结果,确定了一个合理的边界条件,用有限元法模拟计算了沿轴场分布。
The temperature distribution in the iron plate is numerical simulated by using the finite element method. The differences between several airflow speeds are compared.
我们用有限单元法对钢板中的温度分布进行了数值模拟,并比较了不同气流速度下的差异。
The Maxwell stress between magnet and keeper was integral analyzed using the finite element method, and the attractive force between magnetic attachments was obtained.
通过有限元法积分作用于闭路磁体与衔铁之间的麦克斯韦应力,算得磁性附着体的固位力。
The torsional stiffness of a large turbogenerator rotor body and the factors influencing the stiffness are studied systematically in by using the finite element method.
本文利用有限元数值计算方法,系统研究了发电机转子本体部分的扭转刚度及其主要的影响因素。
Normal modes in the pole and important characteristic parameters such as resonance frequency and position of the displacement node are obtained using the finite element method.
并应用有限元法对变幅杆进行了模态分析,得到了共振频率和位移节点等重要参数。
Based on the theory of elastodynamics, the interaction of elastic surface acoustic waves with surface-breaking defect is studied numerically by using the finite element method.
基于弹性动力学理论,采用有限元方法数值模拟了声表面波沿金属表面传播及其与表面缺陷相互作用的过程。
The effects of matching materials on the brake temperature of braker were investigated by using the finite element method to simulate the temperature transient process of disc brake.
采用有限元法模拟盘式制动器制动过程瞬态温度场,研究了材料匹配性对制动器温度场的影响。
The effects of matching materials on the brake temperature of braker were investigated by using the finite element method to simulate the temperature transient process of disc brake.
采用有限元法模拟盘式制动器制动过程瞬态温度场,研究了材料匹配性对制动器温度场的影响。
应用推荐