Physical insight is valuable in using the finite element method.
在利用有限方法时，物理上的观点是有价值的。
It was universal to study ship's longitudinal strength by using the finite element-method.
目前国内外普遍运用有限元方法研究船体的总纵强度。
Furthermore, the fixture structure is optimized by using the finite element analysis software ANSYS.
并利用有限元分析软件Ansys进行辅助设计，对其结构进行优化。
In this paper, using the finite element method, we discuss the two-grid methods for two simplified models.
本文针对二维三温辐射热传导方程的两种简化模型的有限元方程，讨论了两层网格方法。
In this paper, we give an analysis for friction-free interference fit bolt using the finite element method.
本文采用有限元素方法在螺纹面无摩擦力的条件下对过盈配合的螺栓、螺母进行了分析计算。
The sustainability of perforating casing with screw holding is analysed by using the finite element software ANSYS.
文章利用ANSYS有限元分析软件，对螺旋布孔射孔套管的承载能力进行了分析。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法，分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
Based on cutting and vibrating theories, the dynamic behavior of micro drill is studied by using the finite element method.
基于切削和振动理论，利用有限元技术对微细钻头振动钻入动力学特性进行了深入地研究。
Using the finite element method to analyze the mixing chamber, the temperature distribution as well as the change situation.
利用有限元法对混炼过程中密炼室、胶料的温度分布以及变化情况进行了分析。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
Stochastic dynamic responses of planar rigid-frame structures to quake loads are investigated by using the finite element approach.
本文利用有限元方法，分析了平面刚架结构对地震载荷的随机动力响应问题。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
The machining deformation of aeronautical thin-wall arc shaped workpiece is investigated by using the finite element simulation technique.
采用有限元模拟技术研究航空薄壁弧形结构件加工变形问题。
The experimental results were used to calculate material properties, using the finite element method combined with optimization techniques.
该方法根据实测的客观物理量集成运用有限元方法和优化技术来测算材料的弹性参数。
Using the finite element method, the dynamic buckling of a bar with finite initial imperfection under axial impact is analyzed in this paper.
本文用有限元方法分析了一定初缺陷杆受轴向冲击的弹塑性动态屈曲。
Comprehensive function of varying contact length backup roll (VCR) is analyzed by using the finite element model for elastic deformation of rolls.
利用建立的有限元辊系弹性变形模型，分析了变接触支持辊(VCR)的综合性能。
A typical problem of a jointed rock slope has been analyzed and factors of safety against collapse have been computed using the Finite Element Method.
文中用有限元法分析了一个节理岩石边坡的典型问题，并计算出其抗破坏的安全因子。
The authors, using the finite element method, analyse the rules of continuous deep beam internal forces under the influence of the support plate width.
作者以有限元法分析了连续深梁的内力受支座垫板宽度影响的变化规律；
In this paper, the static analysis of Hydroplan of hydropower station engineering of Xianrendong is performed by using the finite element software of ANSYS.
本论文通过有限元分析软件ANSYS对贵州省纳雍县仙人洞水电站的厂房工程进行了结构静力分析。
The predicted transmission loss of perforated tube silencers using the finite element method and experimental results are compared and showed good agreement.
使用有限元法计算穿孔管消声器的传递损失，并与实验测量结果进行了比较，二者吻合良好。
The test model and another model with the same span, span-height ratio, and sectional dimensions were analyzed using the finite element analysis software ANSYS.
同时利用有限元计算软件AN SY S对试验模型以及与试验模型相同跨度、跨高比和截面尺寸的门式刚架进行计算。
Based on continuum theory, the vibration of pipeline in LPG filling stations has been analyzed by using the finite element program (SAP5) of structure analysis.
应用连续体振动理论和SAP5结构分析有限元程序，分析了液化石油气充瓶站管线振动问题。
According to the measured results, a reasonable boundary condition can be set up and then the field distribution can be calculated by using the finite element method.
按测量结果，确定了一个合理的边界条件，用有限元法模拟计算了沿轴场分布。
The Maxwell stress between magnet and keeper was integral analyzed using the finite element method, and the attractive force between magnetic attachments was obtained.
通过有限元法积分作用于闭路磁体与衔铁之间的麦克斯韦应力，算得磁性附着体的固位力。
The torsional stiffness of a large turbogenerator rotor body and the factors influencing the stiffness are studied systematically in by using the finite element method.
本文利用有限元数值计算方法，系统研究了发电机转子本体部分的扭转刚度及其主要的影响因素。
By using the Finite Element Method (FEM), the nonlinear thermal vibration characteristics of composite laminated plates under linear temperature field were investigated.
采用有限元方法研究复合材料层合板结构在线性温度场作用下非线性热振动特性。
Matrix step is low by using the finite element transfer matrix method. Natural frequency by calculation approaches to actual natural frequency and the error is allowable.
用有限元传递矩阵法分析火炮身管固有振动特性，矩阵阶次低，计算所得的固有频率与实际固有频率接近，误差在允许的范围内。
Because hinges need linear deformation, using the finite element software ANSYS to study the performance of the hinges, then discusses the hinges parameters' impact on linearity.
因为铰链需要线性变形，因此利用有限元分析软件ANSYS对柔性铰链进行系统的研究，讨论铰链的各个参数对其线性性能的影响。
Because hinges need linear deformation, using the finite element software ANSYS to study the performance of the hinges, then discusses the hinges parameters' impact on linearity.
因为铰链需要线性变形，因此利用有限元分析软件ANSYS对柔性铰链进行系统的研究，讨论铰链的各个参数对其线性性能的影响。
应用推荐