The mathematical model of the molten iron ladle was established using finite element method.
本文采用有限元法建立了铁液包倾转力矩数学模型。
By using finite element method, the deformations of flat membrane mirror have been calculated.
运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。
The reflection phase property and surface wave dispersion are analyzed using finite element method.
用有限元方法分析了其反射相位特性及表面波传输特性。
This paper deals with the interaction between shear wall and its foundation using finite element method.
本文采用有限单元法对建在多层地基上的剪力墙， 基础和土进行了共同作用分析。
In this paper, temperature and stress field on the bottom had been simulated using finite element method.
本文运用有限单元法，对钢包底的温度场和应力场进行了数值模拟。
Meanwhile, the transmitting voltage response of the transducers are calculated by using finite element method.
后又利用有限元方法计算了换能器的电压发射响应。
A computer program is worked out for modification design of helical gears by using Finite Element Method (FEM).
提出了一套斜齿轮修形用的有限元计算程序。
In this paper the release coefficient of residual stress of blind holes is calculated by using finite element method.
本文采用有限无法对盲孔残余应力释放测量中所需的应力释放系数进行了计算。
An earthquake in Wulong possibly induced by Jiangkou reservoir impounding is analyzed by using finite element method.
本文利用有限元方法计算了武隆江口水库蓄水后可能引起的水库诱发地震。
The vacuum shape change of vacuum target chamber in prototype facility has been analyzed using finite element method.
用有限元方法分析了原型装置真空靶室的真空形变。
Based on the model, calculations for an actual structure of the bearings are carried out using finite element method.
根据所建模型，应用有限元法针对一具体结构进行了计算。
The structure of the lid is designed according to the wave penetrating theory and is optimized by using finite element method.
结构设计依据电磁透波原理，并应用有限元进行结构优化。
By using finite element method, a pressure piping with incomplete welding flaw was analyzed in strength and assessed in safety.
采用有限元方法对一条含未焊透缺陷的压力管道进行了强度分析与安全评定。
Using finite element method, the thermal and mechanical deformations of herringbone spiral groove mechanical seal are analyzed.
用有限元法分析了人字形螺旋槽机械密封的热变形和力变形。
Transverse excursion process of micro drill in ultrasonic longitudinal vibration drilling is analyzed by using finite element method.
利用有限元技术对微细钻头超声轴向振动钻入横向偏移过程进行深入分析。
The structure and features of an antenna pedestal are introduced, the pedestal and the turnplate are analyzed using finite element method.
主要介绍了机动式雷达天线座系统一般组成及其结构设计特点，并结合实例对底座转台进行了有限元分析。
Finally, the torsion vibration nature frequency and torque amplitude factor of a rolling mill are calculated by using finite element method.
最后使用有限元法计算了某钢厂冷轧机主传动轴系的扭振固有频率和转矩放大系数。
This paper approaches the excavating dynamic behavlour and support design for a large cavern in Nanfen Iron Mine using finite element method.
针对南芬铁矿地下硐室开挖与支护设计，采用有限元分析研究大跨度地下硐室施工的动态力学效应。
Dynamic characteristic of a cracked thin disk is analyzed by using finite element method. Its vibration modes and strain responses are obtained.
运用有限元方法对裂纹圆盘进行动态特性分析，获得振型和应变响应。
In design of building structures the bottom plate on elastic foundation is calculated in common using finite element method or calculation charts.
在建筑结构设计中弹性支承板的计算一般采用有限元法和图表法。
Theoretical calculation and discussion are presented on the dynamic characteristics of main frame of sugarcane cleaner using finite element method.
利用有限元分析的方法对甘蔗剥叶机机架的动态特性进行了理论计算和探讨。
In this paper, the pedestal structural characteristics of vehicle-borne weapon launcher in the state of launch were studied using finite element method.
采用有限元方法对某车载武器系统发射装置的底架在发射状态时的结构特性进行了研究。
The temperature field and microstructure field during laser heat treatment process were calculated using Finite Element Method or Finite Difference Method.
应用有限元和有限差分方法对激光热处理过程的温度场、组织场进行了数值模拟计算。
Using finite element method, this article presents a mathematical model and computer program for the mechanical calculation of overhead transmission lines.
本文提出了用有限元法进行架空线机械计算的数学模型和计算程序。
The levitating and propulsive electromagnetic fields of normal high speed magnetic levitation vehicle is studied using finite element method in this paper.
采用有限元法研究了常导高速磁浮列车的悬浮和推进电磁场。
A group of hybrid flexure hinges with different corner filleted radius are analyzed using finite element method, and their flexibility stress ratios are achieved.
通过有限元方法，分析了一组不同导角半径的混合铰链设计实例，并得到其柔度应力比值。
A group of hybrid flexure hinges with different corner filleted radius are analyzed using finite element method, and their flexibility stress ratios are achieved.
通过有限元方法，分析了一组不同导角半径的混合铰链设计实例，并得到其柔度应力比值。
应用推荐