Contact problem of two long cylinders is analysed using ANSYS software.
以点—面接触为例，运用ANSYS对两长圆柱体的接触问题进行分析。
The method and procedures of establishing load-deflection model by using ANSYS software are described.
使用该模型可进行矫直行程的计算，解决了有限元方法在自动矫直机上的应用问题。
The crack driving force parameter (J-integral) is calculated and analyzed using ANSYS software in this thesis.
本研究利用ANSYS有限元软件计算和分析裂纹驱动力参量J积分。
In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment.
本文采用有限元分析方法，运用ANSYS软件，对C臂的静态应力进行了深入的研究。
Methods To establish the models of mandibular symphysis fracture rigid internal fixation RIF using ANSYS software.
方法：利用ANSYS软件建立下颌骨颏部骨折及坚强内固定的三维有限元模型。
Eddy current testing system of carburized materials was developed by using ANSYS software as second development platform.
以通用有限元分析软件A NSYS作为二次开发平台，开发了面向渗碳材料的涡流测试系统。
By using ANSYS software as a development platform, finite element analysis and optimal design is made to some packing machinery parts.
以ANSYS软件为开发平台，对某包装机械的零件进行了有限元分析和优化设计。
A 3-d model of 2-span double continuous composite beam was established by using ANSYS software to validate the accuracy of this method.
用有限元软件ANSYS建立2跨双层连续组合梁的空间模型对该方法的准确性进行验证。
Under the simple harmonic vibration, the stable forced vibration of multiple-degree-of-freedom system is analysed by using ANSYS software.
运用ANSYS软件分析多自由度系统在简谐激励作用下的稳态受迫振动。
The results show that the accuracy for crack tip stress intensity factor using ANSYS software is enough for engineering designs and analysis.
研究结果表明，ANSYS程序裂纹尖端应力强度因子计算方法的计算精度可以满足工程设计和分析需要。
Calculations by using ANSYS software were carried out to simulate the 3d temperature field of T8 steel with the shape of cylinder during quenching.
用有限元软件ANSYS模拟计算了T8钢圆柱体水淬过程中三维温度场的变化。
This paper computes the natural vibration character? The vibration isolation effect and the shock resistance of a floating raft, using ANSYS software.
本文采用ANSYS软件对一船用辅机浮筏的固有振动特性、隔振效果和抗冲击性能进行了数值分析。
Authors presented a finite element (FE) model and frequency analysis method for analyzing 3-d full-mode flutter of long-span Bridges using ANSYS software.
提出了一种在ANSYS中直接分析大跨桥梁三维全模态颤振的有限元模型和频域方法。
Taking a marine stacker as model sample, the finite element model for frame construction is established by using ANSYS software and the results are analyzed.
以某船用巷道堆垛机为模型样本，以ANSYS软件为平台建立框架结构的有限元模型，并求解分析。
The computation of strength and stiffness and modal analysis for the body framework of an imported electric mini-car were carried out by using ANSYS software.
利用ANSYS软件对某进口微型电动轿车车身骨架进行了强度、刚度和模态计算。
A simulation of dynamic forces acting on invert prefabricates in TBM construction tunnel is made with surrounding rock-structure model by using ANSYS software.
运用计算软件ANSYS，采用围岩—结构模式，对TBM施工隧道仰拱预制块进行模拟动态施工的受力计算研究。
Using ANSYS software, the spatial distribution of magnetic flux density around the furnace body was simulated. The simulation data were compared with measured ones.
利用ANSYS软件包，通过求解磁矢量微分方程，确定了磁感应强度在空间的分布，计算结果与实际测量数据进行了对比。
In the paper, a thermal simulation method has been described using ANSYS software based DC/DC power module. Experiment has been done to verify the result of the thermal simulation.
本文以大功率电子组件DC/DC电源变换器为例，提出了基于通用的大型有限元分析软件ANSYS进行热模拟分析方法，并利用实验结果对模拟结果进行了验证。
Based on the force behavior of joist of large-span prestressed space frame system, space finite element analysis of prestressed beam-slab system is carried out by using ANSYS software.
针对大跨度预应力空间框架体系托梁受力复杂的特点，采用ANSYS软件进行了预应力梁板体系的空间有限元分析。
In this paper, using ANSYS software, establish the three-dimensional solid model of laminated rubber bearing, take advantage of changes in model parameters to simulate the bearing damage.
本文利用ANSYS有限元计算软件，建立了板式橡胶支座的三维实体模型，讨论了利用模型单元参数的改变来模拟橡胶支座受损的可行性。
Based on the Winkler theory, the finite element model for directly buried hot water heat-supply pipeline is founded by using ANSYS software, and the effect of soil on pipeline is simulated.
基于文克勒理论采用ANSYS软件建立了直埋热水供热管道的有限元模型，模拟了土壤对管道的作用。
A finite element(FE) model for a tripot universal joint is developed, and a FE analysis on the contact stresses in the parts of the joint under extreme torque is conducted using ANSYS software.
将轿车三枢轴式等速万向节的三维模型经过结构简化离散成有限元模型，并应用ANSYS软件对其承受极限转矩时的内部接触应力进行有限元分析。
The magnetic distribution of the single-coil and dual-coil magnetic rheological dampers with the same effective piston length was analyzed by using the finite element ANSYS software.
采用有限元ansys软件，分析了相同活塞有效长度下的单线圈与双线圈结构磁流变阻尼器的磁场分布情况。
Based on FEM software ANSYS, the dendrites stress states are computed using the results of the melt flow as computing parameters.
使用有限元软件ANSYS，把熔体流动计算结果作为参数，计算了枝晶的受力状态。
Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
在此基础上应用有限元法的通用软件ANSYS，对大型水轮发电机定子温度场进行分析与计算，绘制了相应温度场图。
The stator's characteristics of vibration and input impedance were analyzed by using the finite element software ANSYS. A new decoupling method between the two vibrators was presented.
对电机的运行机理进行了分析，并利用有限元软件ANSYS分析了电机定子的振动特性和阻抗特性，同时提出了一种振子间解耦的方法。
The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.
针对织针网带炉淬火，利用有限元分析软件ANSYS，对织针加热过程中的温度变化进行了模拟。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
应用推荐