The hardware is composed by upper-computer and PC, the software are consist of configuration manger software and PC run software.
系统的硬件由上位机和PC控制器构成，软件由二次开发的上位机组态运行操作管理软件和PC运行软件组成。
The system consists of an upper-computer display, a lower-computer execution control as well as an upper-lower computer communication.
该系统由上位机显示控制、下位机执行控制、上下位机通信三部分组成。
Serial communication program can automatically transmit the testing data and information to the upper computer after the data testing.
串口通信程序在测试完毕后自动向上级计算机传输测试数据和信息交换。
Design communication interface software of upper computer.
上位机通信接口软件的开发。
Surrounding the actualization of the algorithm, the author accomplished the main hardware and software design of the DSP target. The upper computer software has also been designed.
作者还以实现算法为中心，完成了主要的硬件设计和DSP目标板的软件系统的设计以及上位机程序的设计。
The main description is on designs such as overall scheme, control program, communication interface between PLC and upper computer, data read program.
本文介绍了立体车库的PLC控制系统总体设计、控制程序设计、PLC与上位机接口的通信方案设计、计算机从PLC读取数据的程序设计等。
Based on the analysis and study on different interface modes of the upper computer, a kind of intelligence interface technology method has been put forward.
通过分析和研究上位机各种接口方式，提出了一种智能化接口技术的实现方法。
The system consists of upper computer software, RS232-485 converter, every kind of modules and cables. And finally the monitor program is designed with the sequential query mode.
系统包括上位机软件、RS232—485转换器、分机模块及电缆连接4部分，其监控程序的设计采用顺序查询的方式执行主程序。
A reconfigurable embedded NC system is studied. As linked with an upper computer with grid middleware and toolkits, the system can be considered as a reconfigurable node in the manufacturing grid.
提出了一种可重构的嵌入式数控系统，通过与安装有网格中间件和网格支持工具的上位机相连，可以很方便地作为制造网格的一个可重构节点。
The acquisition system is composed of 8051 Single Chip which controls transmitting and accepting Ultrasound, and to use RS232 as a message channel to upper computer.
该采集系统采用8051单片机控制超声波的发射与接收，采用RS232与上位微机通讯。
Accurate steering function has been achieved by controlling the steering operator depending on the instructions from the upper computer (that is, the computer for automatic drive control).
它能够根据上位机(自动驾驶控制计算机)下达的转向指令控制转向执行机构实现准确的转向功能。
This paper proposed a novel control method for implementing the tread winding of OTR tire, which features the central role of the upper computer in manufacturing process.
本文提出了一种以上位机为核心，充分利用上位机强大的运算能力和编程的灵活性来实现工程轮胎胎面仿形缠绕控制的方法。
Data analyzing, processing, curve drawing and tendency forecasting are finished by the upper computer finally.
数据的分析、处理、绘制曲线以及趋势的预测最终由上位机完成。
The system consists of the formation channels and upper computer.
该系统由化成通道(下位机)和上位机组成。
Objective: To design a upper computer software which can achieve data acquisition, display, motion control for sickbed-control test system.
目的：为病床控制系统测试平台设计一种能够进行数据采集与运动控制的上位机软件。
The upper computer is based on the PC104 bus embedded industrial control computer to achieve the functions of statistical analysis, parameters setting, storing, displaying and communicating.
上位机采用基于PC104总线的嵌入式工业控制计算机，以实现数据的统计分析、参数设置、存储、显示、通信等功能；
The system includes the upper computer software, the MCU circuit, the driver and the step motor.
该控制系统包括上位机控制界面、单片机控制电路、驱动器以及步进电机。
The communication with the upper computer was realized through PCI bus, DSP and CPLD was used to achieve motion control of manipulator's joints.
控制器通过PCI总线与上位机通信，采用DSP和CPLD完成了运动控制功能，实现了机械手关节运动的伺服控制。
The system software included upper computer system software and lower computer system software. Method of structural module was adopted in the design of the system software.
系统软件包括上位机系统软件和下位机系统软件，软件的设计采用结构化模块设计方法。
The system hardware was composed of upper computer and lower computer.
系统硬件由上位机和下位机两部分组成。
Wireless transmission between the data acquisition card and the upper computer is realized through the substitution of a couple of wireless data transmission modules for cables.
振动数据采集系统利用—对无线数传模块取代电缆线，实现了数据采集卡与上位机之间命令和数据信号的无线传输。
Optical cable is applied to communicate between measurement system near transformers and upper computer in main controlling room in order to improve reliability of monitoring system itself.
利用光缆传输系统实现变电站主控制室的上位机与现场的测量系统之间的通讯以提高系统整体抗干扰能力和信号传输的可靠性。
The paper introduces an elevator model control system which is implemented with double PLC and PC-LINK network, the overall system movement is monitored through the upper computer software.
介绍了采用双plc及其PC—L INK网络设计的电梯模型控制系统，通过上位机软件对整个系统的运行进行实时监控。
The programs of upper computer.
上位计算机程序。
The control system of security interlocking protection consisting of PLC and upper computer is introduced.
介绍了由PLC及上位机组成的安全联锁保护控制系统。
The upper computer communicating with the scale model ship through a pair of RF transmitters, is placed on the shore.
上位机采用笔记本电脑，放置于岸边，用一对射频收发器与船舶缩尺模型进行无线通信。
The OPC is used for exchanging data between the upper computer with sever, and the automatization of the information systems is realized.
上位机使用OPC技术与工厂信息管理系统进行数据交换，实现汽车生产线信息管理的自动化。
The main function of the MODEM communication module is to transmit the acquired data to the upper computer by the serial communication of RS-232C.
MODEM通信模块的主要功能是将采集到的数据通过RS - 232c串行通信传送给上位机。
The upper computer, PC microcomputer, was the headquarters of the system.
上位机采用PC机，是系统的指挥中心；
The "three-remote" technique has been realized through the upper computer.
通过上位机，对电源系统实现了“三遥”。
应用推荐