The system should ensure rapid and uniform cooling.
模具的冷却系统应该保证迅速和均匀的冷却。
The design of air-cooling provides rapid and uniform cooling to keep the fresh taste of food.
风冷设计，制冷快速均匀，保持食品新鲜口感。
The rapid cooling increases the productivity, while the uniform cooling improves plastic product quality.
迅速冷却提高了生产效率，而均匀冷却改善了塑件质量。
This reduces the knife dish load, and improve efficiency, and grinding can make powder get uniform cooling.
这样减少了刀盘负荷，提高磨粉效率，又能使粉料得到均匀冷却。
The porous type air-out equipped can fully reach every corner of the cabinet to ensure the uniform cooling of items and the better refrigeration effect.
微孔式出风，充分到达柜内每一个角落，保证物品受冷均匀，冷藏效果更佳。
Uniform pumping and uniform cooling are key techniques to reduce thermo-optical distortion and to achieve high beam quality output for solid-state laser.
均匀抽运及均匀冷却是激光二极管抽运激光器减小热致光学畸变以实现高光束质量输出的核心技术难题。
By comparison different temperature field which are affected by the lay-out of cooling section, this paper uncovers the importance of uniform cooling when design cooling section of calibrator.
并通过不同冷却流道所影响的型坯温度场的比较，揭示了整体均匀冷却在定型模冷却系统设计中的重要意义。
According to the idea of uniform cooling in secondary cooling zone, the spraying cooling structure and the disposal of nozzles are redesigned and optimized, and one spraying cooling zone is increased.
依据二冷均匀冷却的思想，重新设计并优化了二冷喷淋结构和喷嘴的布置，增加了一个二冷喷淋段。
In order to obtain the expected sand cooling and humidifying effect, requiring sand in the boiling bed to flow in uniform.
为使型砂获得预期的冷却和增湿效果，要求型砂在沸腾床上均匀的流动。
Therefore, the shape of water chamber is in favor of uniform distribution of cooling water volume in tube bundle.
因此，水室的形状应有利于冷却水量在管束中的均匀分配。
Agitation can make the cooling medium cooling groove continuous cycle, so that the temperature is uniform.
搅拌可使冷却槽内的冷却介质不断循环，使温度均匀一致。
The machine through the water circulating heating and cooling, let dissolve wax more uniform.
本机通过水循环加热和冷却，让溶蜡更加均匀。
The analysis results prove that the designed chip has uniform temperature distribution and higher temperature rising and cooling rates and could meet the requirement of PCR.
分析结果表明设计的聚合物芯片温度分布均匀，有较高的升、降温速率，可以满足PCR反应的要求。
It shows that thin slab continuous casting has a greater secondary cooling intensity, a faster solidifying rate, a fine and uniform structure and less segregation than conventional slab casting.
研究表明，薄板坯的二冷强度大，凝固速度快，组织细小、均匀，其内部溶质元素的偏析程度远低于传统连铸板坯。
Therefore, to maintain uniform temperature distribution of the blank is crucial for the cooling system design of the die.
因此使板料在成形过程中保持均匀的温度分布是模具冷却系统设计的关键。
Gear in heat treatment furnace, must maintain a uniform temperature, and using the apparatus, the gear is uniformly heating and cooling, is strictly prohibited stacking together.
齿轮在热处理中，一定要保持炉膛温度均匀，以及采用工位器具，使齿轮均匀地加热及冷却，严禁堆放在一起。
Component design and casting techniques must ensure that metal composition and structures remain uniform throughout and that cooling rates are evenly distributed.
部件设计与铸造技术必须保证金属成分与结构始终保持均匀、冷却率均匀分布。
It is found that the more uniform temperature distribution could be acquired by strengthening the cooling in the fillet part of the H-beam in the controlled cooling process.
结果表明：在轧后控制冷却过程中，若冷却水集中从 H型钢腿部外侧对其腰腿接合处进行快速冷却可获得较均匀的温度分布。
During preparation, the cooling medium is flowed in the external cooling controller and the internal cooling controller so as to lead the temperature field of the slurry to be uniform.
制备过程中，外部冷却控制器和内部冷却控制器中通入冷却介质，均匀浆料的温度场。
Spray cooling is an efficient cooling techniques, which offers the ability to remove high heat fluxes, and provides uniform device temperatures.
喷雾相变冷却是一种高效的冷却技术，具有高热流密度的冷却能力和严格的温度控制能力。
Compared to the channel with uniform section area, those with various section areas are much similar to the internal cooling structure of the turbine blade.
与等截面回转通道相比较，变截面通道更接近叶片内冷通道原型。
This series applies originally imported compressor. The forced air cooling presents speedy cooling and uniform temperature inside a cabinet.
采用原装进口压缩机，强制风冷，冷却速度快，柜内温度均匀。
The novel design of the cooling-heating cycle unit facilitates rapid change of temperature and can provide a uniform temperature filed in the rockfill specimens.
采用了内外兼顾的温控设计思路，不仅可以使试样快速实现温度的变化，且能为试样提供均匀的温度场。
The novel design of the cooling-heating cycle unit facilitates rapid change of temperature and can provide a uniform temperature filed in the rockfill specimens.
采用了内外兼顾的温控设计思路，不仅可以使试样快速实现温度的变化，且能为试样提供均匀的温度场。
应用推荐