This paper introduces the technical improvement of continuous pusher type furnace.
本文论述了连续式推杆热处理炉的技术改造。
The process parameters for furnacing gangue and configuration principle of the new type furnace are introduced in this paper.
本文介绍了焙烧煤矸石的工艺参数和新型煤矸石焙烧炉的构造原理。
This paper analyzes the failures of air operated double position butterfly valve used in car type furnace, and puts forward improving plan.
本文对台车炉气动双位蝶阀产生的故障进行了分析，并提出了改进方案。
As a practical example the present paper briefly describes the monitoring and diagnosis system for the gear box pot type furnace top of no. 5 b...
作为应用实例，本文简要地介绍武钢炼铁厂5号高炉罐式炉顶齿轮箱监测诊断系统。
Excessive convexity, severe wedge, dissymmetric convexity and partial protrusion will result in sticking of sheets during annealing in the bell-type furnace.
热轧板凸度过大，楔形严重，凸度不对称和有局部高点，均可造成罩式炉退火时产生粘结。
This paper introduces the national building process of the bell type furnace. The furnace linings USES the home built refractory to replace the input products.
本文介绍了罩式炉国产化改造过程中，以国产耐火材料替代进口高级耐火材料作炉衬的应用及进展。
A furnace with preheating equipment for water vapor is developed for surface oxidation treatment of hot work dies. This type furnace is successfully used in industry.
针对热作模具钢的表面氧化处理，本文开发了一种带蒸汽预热装置的氧化处理炉，这种炉型现已应用于工业生产。
On the basis of analysis of phosphorus-burn furnace at home and abroad, a new type furnace with radiating surface, which can recover the residual heat, is introduced.
在分析国内外磷燃烧塔现状的基础上，介绍一种借助辐射换热面实现余热回收的新型燃磷塔的结构。
ZC Series quenching tank, mainly for electric Well, the electric car, box-type furnace, molten salt, and other electric furnace heated hardening of the workpiece use.
主要供井式炉、台车炉、箱式炉、盐浴炉等各种电炉加热后的工件淬火使用。
A on-line mathematical model for tracing coil temperature of the bell-type furnace is established based on the two-dimensional, axisymmetric, transient heat conduction equation.
建立了以温度跟踪为目的的全氢罩式炉钢卷退火过程在线数学模型。
A drawer-type furnace for firing ceramics, especially large ceramic artworks, contains 6-12 nozzles, each having gas mixer, small combustion chamber and fire bulkhead with hole.
一种抽匣式窑炉，在窑内有6―12个燃烧喷嘴，每个喷嘴都有燃烧混合气器、小燃烧室及带孔挡火板。
Composition:The whole production line consists of lifting plate, loading and unloading plate, sealed box-type furnace, rinsing machine, tempering furnace and electric control system etc.
组成：整条生产线由剪式升降台、置料台、箱式炉、清洗机、回火炉及电气控制系统等组成。
Applications: the bogie hearth electric resistance furnace is a batch type furnace, it is used for normalizing, quenching, annealing and other heat treatments of large or medium metal parts.
用途：台车式电阻炉系周期作业式电炉，可供大中型金属机件和材料的正火、淬火退火等热处理和加热之用。
By using FTIR SO2-detecting system of tube-type furnace, the SO2-releasing regularity during mixedly burning Shenhua coal, cornstalk, and bark with different proportioning ratio has been studied.
利用管式炉-FTIR二氧化硫检测系统对神华煤与玉米杆和树皮在不同混燃比下混合燃烧时SO2的释放规律进行了研究。
The bell-type furnace from SOLO Switzerland has been made in China successfully, the different tests in its performance, process examination and production test of typical parts were carried out.
针对采用瑞士SOLO工业炉技术生产的国产底装料立式多用炉，进行了性能测试、工艺试验和典型件生产试验。
The paper introduces a continuous car type furnace for direct reduction of iron ore. Coal-containing iron ore pellets are laid on cars and carried to pass through furnace to be heated and reduced.
介绍一种用于铁矿直接还原的台车连续炉，含碳球团料层铺在台车上并通过炉膛进行焙烧和还原。
No matter it is knot type furnace lining or fabricated furnace lining, when for long time working under the high temperature it is certain to change (mainly is expansion and contraction or oxidation).
不管是打结式炉衬，还是装配式炉衬，长期在高温下工作都会发生变化（主要是热胀冷缩和氧化）。
No matter it is knot type furnace lining or fabricated furnace lining, when for long time working under the high temperature it is certain to change (mainly is expansion and contraction or oxidation).
不管是打结式炉衬，还是装配式炉衬，长期在高温下工作都会发生变化（主要是热胀冷缩和氧化）。
应用推荐