Measured results indicate that the bend deformation and abruption phenomenon appears very quickly when the "two-bridge-junction" method is adopted in the parallel steel plate beam.
实测资料表明，上下行并行的钢板梁桥在采用“两桥连接”加固以后，平联杆件的弯曲变形和断裂现象急剧增多。
Because of using large plate to detect corner, this method is good for noise filtering and can be popularized to gray images by using two kinds of large plate.
由于先用较大圆盘做初步检测，可以降低噪声干扰。利用两种新的大圆盘，此方法可推广到灰度图像的拐点检测。
The method can detect the warp by observing the distance between the two images reflected from the precision sheet glass and the standard plate for the same reference object.
这种方法是通过观测精密薄板玻璃和基准平面反射同一参考物的像，检测两个像分离的程度来判定精密薄板玻璃的翘曲度。
The chromogenix substrate method was improved for studying NK kinetics. It was found that a high relativity of two methods (chromogenix substrate method and fibrin plate method).
动力学研究采用显色底物法作为酶活检测方法，并确立其与纤维蛋白平板法之间相关性较高。
Boundary element method to calculate the free surface flow over the plate region of the hanged-plate two storied intake work is presented in this paper.
本研究利用边界元法求解了悬板分层式引水渠首的悬板区过流问题。
This method is applied on the dynamical analysis of the Mindlin plate on two parameter elastic foundation.
并将这一方法应用到双参数弹性地基板的动力分析中。
In this paper, an optical-sonde system for measuring the shape of a two-dimensional flying plate and the corresponding data treatment method are described.
本文介绍了一种测量二维形状飞片的光探测系统及其数据处理方法。
For one step direct method, it is essential to have a two dimension pattern plate with high resolution, high contrast and low noise.
一步直接法，必须要有高分辨率，高对比度和低噪声的二维模板，否则必然导致失败。
The traditional boundary element method of outside domain singularity points for plate bending problems needs two boundary integral equations.
传统的平板弯曲边界元域外奇点法要求建立二个边界积分方程才能求解。
In this article, the method is described for measuring the scales of the two coordinate axes of a CCD plate through astronomical observations and the nonperpendicularity of the axes.
本文叙述了用天文观测测定CCD片子上两坐标各自比例尺和两坐标轴不垂直度的方法；
By analysis and comparison between the two methods, some shortcomings of plate pressure connection method are shown and the connection method of sleeve structure is recommended.
本文通过对这两种压接线方式的比较分析，指出板式压接线方法的一些弊端，并推荐选择筒式结构的接线方法。
The exact solutions of displacement and inner force for clamped rectangular thick plate were deduced with two-dimension finite integral transform method.
利用二维有限积分变换的方法推导出了四边固支矩形厚板位移和内力的精确解。
The velocity at the free face of a thick steel plate impacted by an explosive plate is calculated by means of the two-dimension dynamic finite element analytical method.
在炸药爆炸驱动飞板碰撞厚钢板后，利用二维动态有限元数值分析方法对厚钢板自由面的速度进行了数值计算。
The proposed method is divided into two steps: 1 license plate location by the variance of gray image, and 2 license plate segmentation by connected components analysis and projection analysis.
该系统由两个重要步骤组成：1基于灰度方差的车牌定位算法，2结合连通域分析和投影分析的字符切分算法。
The superconvergence of an improved vortex lattice method for a two-dimensional flat plate has been verified theoretically.
本文就二维平板从理论上证明了改进涡格法的超收敛性。
The effect of span between two cores of lime-titania type carbon-steel electrode was investigated using the method of overlay welding on the plate work-piece and high speed camera system.
采用平板堆焊的方法及高速摄像系统，研究了双电极钛钙型碳钢焊条的焊芯间距对焊接工艺和电弧形态的影响。
In order to acquire a good hermetic seal between the diaphragm and the base plate, two sealing methods were used, namely, compound method and crystallite method.
研究了复合法和结晶法两种封接方式，使陶瓷基座与膜片达到良好的匹配封接。
The analytical solutions for an elastic rectangular thin plate with two adjacent boundaries clamped-supported and the others simplified-supported are derived by a symplectic geometry method.
利用辛几何的方法推导出了两邻边固支另两邻边简支弹性矩形薄板问题的理论解。
The two dosage of cup-plate method is used to determine titre of antibiotics with high accuracy.
目的建立以微生物比浊法测定口服阿奇霉素效价含量的方法。
The multiple-plate rolling method is used on plate mill at Shougang Co, including single-plate rolling mode, two-plate one-holding one-rolling mode and three-plate two-holding one-rolling mode.
首钢中厚板轧机在生产过程中采用多块轧件交叉轧制，根据具体工艺参数可以分别采用单坯轧制模式、双坯一待一轧模式或三坯两待一轧模式。
The multiple-plate rolling method is used on plate mill at Shougang Co, including single-plate rolling mode, two-plate one-holding one-rolling mode and three-plate two-holding one-rolling mode.
首钢中厚板轧机在生产过程中采用多块轧件交叉轧制，根据具体工艺参数可以分别采用单坯轧制模式、双坯一待一轧模式或三坯两待一轧模式。
应用推荐