Technical parameters of twin-roll steel continuous casting are important.
在双辊铸轧薄带过程中最关键的是工艺参数的合适确定。
The twin-roll cast strip technology was considered as the newest one in the 21st century.
薄带连铸技术被称为21世纪前沿连铸技术。
In this paper, using physical and numerical simulation method research metal delivery system of twin-roll thin strip continuous casting pool.
本文采用物理模拟和数值模拟相结合的方法研究了双辊薄带熔池内布流系统。
In this paper, the twin-roll casting and hot rolling were used to manufacture magnesium alloy strip, and the strip billet was rolled into thin strip.
研究了双辊铸轧及热轧镁合金薄带的生产工艺，利用铸轧坯直接进行热轧，研究轧制工艺参数及轧后冷却条件对镁合金微观组织的影响。
A transient heat-transfer mathematic model was established using a Lagrangian coordinate system in twin-roll aluminum trip casting and rolling process.
采用拉格朗日随体坐标建立了铝双辊铸轧过程瞬态传热数学模型。
The paper studies the twin-roll strip casting process by a water model. By using the level detector, the level fluctuation has been measured in the pool.
本文利用水模型研究了双辊薄带连铸过程，使用浪高仪对双辊间熔池内的液面波动进行了测量。
The recent progress on the research of the mathematical model of casting process and solidification microstructure for twin-roll strip cast is discussed.
综述了近年来双辊薄带连铸过程与凝固组织数学多场耦合模型的研究进展。
Twin-roll casting hydraulic AGC system is designed to adjust the gap between double rollers and improve it's control accuracy, response accuracy and stability.
通过设计双辊铸轧液压A GC系统来调节辊缝间隙，提高其控制精度、响应速度和稳定性。
Rather new manufacturing technologies such as thin slab casting rolling and twin roll casting technology were prospected.
介绍了具有代表性的研发趋势，如薄板坯连铸连轧、双辊薄带铸轧等新工艺。
As a new sort of near net shape continuous casting technology, twin roll continuous casting technology is widely attended by domestic and overseas researchers in recent years.
双辊连铸技术是一种新型近终形连铸技术，近年来受到普遍关注。
Twin roll strip casting of steel is a new process which produce the strip products directly from melt metal by using the two counter rotating rolls as the mould.
双辊薄带钢连铸也称薄带连续铸轧，是以液态金属为原料，以两个转动方向相反的铸辊为结晶器．用液态金属直接生产薄带钢的新技术。
The structure of dual phase and orientation of AISI304 casting thin strip produced by twin roll caster were analyzed by orientation mapping based on EBSD technique.
利用EBSD取向成像技术，分析了双辊连铸法生产的AI SI 304 奥氏体连铸薄带的两相组织结构及取向特点。
This paper introduces the side dam technique for twin - roll continuous casting as well as refractory materials used for side dam.
本文主要介绍双辊连铸中侧封技术的研究概况及新型侧封板耐火材料的研制情况。
In the twin cooling-strip and twin roll rapid solidification method, the metal strip has lateral thick difference.
采用双辊法和双带法制备的快速凝固带材，存在着较大的横向厚差。
The paper introduces some methods for diameter compute, velocity measurement, tension control, the same shaft series twice motors control and load balance control of twin drive roll.
介绍了卷径计算、线速度测量、张力控制、同轴串联双电机控制、上下辊负荷平衡控制方法。
Silicon steel is one of the most potential steel grades that can be produced with twin roll strip casting process.
硅钢是双辊薄带连铸工艺最具开发潜力的钢种之一。
Experimental result by low-melting point alloy on the electromagnetic damming for the melt puddle of twin roll steel strip continuous casting is reported.
报道双辊薄带钢铸轧熔池电磁侧封低熔点合金模拟试验研究结果。
Roll shell's thermal stresses cyclically vary with the changes of its temperature field in the process of twin roll casting.
在铝薄带超常铸轧过程中，铸轧辊套温度场周期性的变化引起铸轧辊套内热应力场的周期性变化。
Those results are helpful to the structural design of inner cooling system in the high speed thin gauge twin roll-casting for aluminum alloys.
所得结果对铝合金超常铸轧机铸轧辊的内冷结构设计具有重要参考价值。
The installation, debugging and production status of twin roll strip continuous caster during the technology transferring to 4 enterprises was discussed.
叙述了向四家企业转让薄带连铸机技术过程中安装调试生产状况。
The installation, debugging and production status of twin roll strip continuous caster during the technology transferring to 4 enterprises was discussed.
叙述了向四家企业转让薄带连铸机技术过程中安装调试生产状况。
应用推荐