NOTE: Twin Disc Check Valves can be installed horizontally or in the vertical position with flow up.
注意：双阀瓣止回阀能够安装在水平或流向朝上的垂直位置。
Extrusion rate, melt pressure, flow profile and mixing effects of the conical twin screw with mixing elements were observed experimentally.
对混炼型锥形双螺杆的挤出产量、物料压力、物料流动状态及混合效果进行了大量实验研究。
The paper focuses on the study of dynamics parameters that include flow rate, power consumption, torque and axis force of twin screw pulping extruder.
本文主要对双螺杆磨浆机的动力学参数(流率、功耗、螺杆扭矩和轴向力)进行了研究。
Venus and the Dark Twin are likewise in the vicinity, creating particle flow crowding.
金星和黑暗孪星也同样在附近，造成粒子流拥挤。
Three-dimensional flow simulation of mixing zones in a new conical twin screw extruder with mixing blocks is performed with a finite element package, ANSYS.
利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
Three-dimensional flow simulation of mixing blocks in a conical twin screw extruder is performed with a fi nite element package, ANSYS.
利用A NSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
This thesis concentrates on simulation of Non-Newtonian isothermal flow in kneading block in closely intermeshing co-rotating twin screw extruders.
本文主要就全啮合同向双螺杆挤出机捏合块流道中熔体全充满区的流动进行了全三维非牛顿等温模拟。
Three-dimensional flow simulations of the flight element in an intermeshing co-rotating twin screw extruder are performed by solving the Navier Stokes equations with a finite element package, ANSYS.
利用A NSYS有限元分析软件对啮合同向双螺杆挤出机的螺纹元件流场进行了三维等温非牛顿模拟分析。
The efficiency of twin-tangential annular flow gas distributor was determined by structures of baffles and sleeves.
双切向环流气体分布器性能的优劣与导流板和套筒结构的密切相关。
The critical equipment for multiphase flow transportation are pumps, which can be classified 'as rotary pumps or twin screw pumps.
多相流管道输送的关键设备是多相泵，而多相泵又分为旋转动力泵和双螺杆泵两大类。
A high-capacity axial-flow pump mated to the powerful 635 cm3 2-stroke Twin delivered tremendous thrust across the rev range.
高容量轴流泵配备强大的635立方厘米2冲程双人整个转速范围内提供了巨大的推力。
Experimental study includes the law of flow field variation and variation of water surface in affected zone by the single groyne or twin-groyne.
实验研究包括单丁坝及双丁坝条件下丁坝影响区内流场及水面变化规律；
There are several flow patterns at melting section in co-rotating twin screw extrusion.
提出同向双螺杆挤出的熔融过程中物料运动具有多种形式的观点。
Three-dimensional flow simulation of flight element in mixing zone of a conical twin-screw is performed with a finite element package, ANSYS.
用ANSYS有限元分析软件对锥形双螺杆螺纹元件流道的流场进行了三维模拟。
The twin-tower design allows simultaneous compressed air drying and desiccant media regeneration for uninterrupted compressed air flow.
双塔设计能够同时进行压缩空气烘干和去湿介质再生，而不中断压缩空气的流动。
A fault diagnosis equation for the twin-spool mixed flow turbofan engine was established based on the simulation and gas path analysis.
并以此为基础运用气路分析原理，选取表征发动机性能参数变化的症兆变量和测量参数，建立了发动机故障诊断小偏差方程。
Because of the influence of the hull, the stern propeller of a twin-screw vessel is working under condition of oblique flow, and the unsteady working condition of the blade of a propeller is created.
由于船体的影响，双桨船的螺旋桨处于斜向来流的条件下运转。斜流造成螺旋桨叶工作状态的非定常性。
Wind flow around twin-tower tall buildings is generally complicated and there is no simple method or laws for determination of the induced surface pressures on such buildings.
在一高层双塔楼静力风载风洞试验的基础上，采用时均数值模拟的方法，对其绕流风场进行了模拟，获得了风场的绕流特点和塔楼表面风压的分布规律。
A new model of flow in a twin rotor continuous mixer was analyzed with the finite element software ANSYS.
文中利用有限元软件ANSYS对S形转子连续混炼机的流场进行了模拟分析。
Axial circle flow was introduced. The isothermal flow analysis of non-Newtonian fluid in axial circle region of a non-intermeshing counter-rotating twin-screw extruder was concerned.
引入了轴向循环流动的概念，且利用ANSYS有限元分析软件对非啮合双螺杆挤出机轴向循环流道中的非牛顿流体等温流动进行了三维模拟分析。
A computational method based on rotor free-wake is developed for predictig flow field between the twin rotors of coaxial helicopters.
在随桨叶旋转的坐标系中，建立了悬停旋翼自由尾迹计算的迭代方法和模型。
A computational method based on rotor free-wake is developed for predictig flow field between the twin rotors of coaxial helicopters.
在随桨叶旋转的坐标系中，建立了悬停旋翼自由尾迹计算的迭代方法和模型。
应用推荐