The effect of transverse shear is also discussed.
同时还讨论了横向剪切效应。
This paper presents a method to identify transverse shear modulus for composite materials.
本文提出一种测试复合材料横向剪切弹性模量的参数识别方法。
The basic equations, including the transverse shear, are built on the basis of elastic theory.
基于弹性理论建立了考虑横向剪切变形时复合材料脱层梁的基本方程序。
The bar element which considered the transverse shear effect has significantly improvement on tunnel stability.
考虑横向剪切作用的杆单元，对围岩稳定性有明显提升。
The transverse shear deformation effect is included by use of Mindlin-Reissner first-order shear deformation theory.
分析了计及高阶横向剪切变形的正交各向异性弹性板自由振动的问题。
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied.
研究了扩散控制的界面滑动对纤维复合材料的横向剪切变形行为的影响。
The effect of transverse shear deformation is considered and Angle of rotation of surface normal for each layer is different.
这类板的横向剪切变形效应必须予以考虑，因而层板不同层的表面法线的转角是不同的。
The examples show that the critical load of composite shells of revolution will decrease when considering the transverse shear deformation.
数值算例表明，对于复合材料旋转壳，横向剪切变形使其临界载荷降低；
The stiffness analysis is performed by the finite element method, in which a triangular element considering the transverse shear effects is used.
刚度分析用有限元法完成 ，其中采用了一种考虑横向剪切影响的三角形单元。
The transverse shear deformation as well as extensional strain in each lamina is included. Equations of equlibrium for laminae are first derived.
在计算各单层横向剪切变形影响时，采用单层中面法线变形后维持直线，但放弃层中面法线及其正交线之间变形后保持直角的假定。
The results indicated that transverse shear effect affects greatly on the bending properties of the plank while the ratio of span-height was small.
结果表明：在跨高比较小时，横向剪切效应对板的弯曲性能有显著影响；
The formulation of the element considers the coupling effects between in-plane bending and torsion as well as transverse shear effects for the stiffeners.
在该单元构造过程中，考虑了肋骨弯曲、扭转、面内剪切和横向剪切变形的影响；
Structures added to constrained damping layer are a sort of ones which utilize transverse shear effect of damping layer in order to attain passive control.
约束阻尼层结构是一类利用阻尼层的剪切效应达到减振目的的结构。
If we let the transverse shear stiffness approach to infinity, the governing equation of refined theory can be reduced to the classical thin shell equation.
当壳体的横向剪切刚度很大时，证明了本文提出的精化理论同经典理论的一致性。
Some problems in the measurement of performance of composite material structures, such as the identification of the transverse shear modulus, can be solved.
该方法能够解决正交各向异性复合材料剪切模量的识别等当前复合材料结构性能测试中存在的一些难点问题。
Numerical calculations indicate that the transverse shear stresses at contact surfaces between face layers and core are very important in engineering design.
数值计算表明，夹层板面层和芯层粘结处的层间剪应力在工程设计中是十分重要的。
The analyses show that the transverse shear deformation effect has a significant influence on the thick reinforced concrete slabs and the concentrated load condition.
分析表明，横向剪切变形对钢筋混凝土厚板及集中荷载的影响很大。
In the analysis of the stress and deformation under dynamic loading, the inertia force and damping moment should be considered in addition to the transverse shear effect.
在分析动载荷下的应力和变形时，除考虑横向剪切效应外，还须考虑微段的惯性力和阻尼力矩。
The effects played by transverse shear deformation, panel geometric parameters, total number of plies, fiber orientation, and initial geometric imperfections are studied.
讨论了横向剪切变形，曲板几何参数，铺层数，铺展方式和初始几何缺陷等各种参数变化的影响。
The calculated strength could show the affection caused by transverse shear effect and the affection had only relation to the loading value and no to the ratio of span-height.
预测的强度能够反映出横向剪切效应的影响，其影响只与载荷大小有关，而与跨高比无关；
The main advantages are the transverse shear deformation and rotary inertia are considered naturally, and there is no restriction on the thickness of plate and height of stiffener.
主要优越性表现为：结构的旋转惯性、剪切变形等都得到了考虑，且不限制结构的板厚度和加强筋的高度。
It is also seen that the transverse shear deformation and warping have effects on the aeroelastic stability of the rotor blade. These effects become larger at the higher thrust level.
同时对悬停时桨叶的气弹稳定性有相当程度的影响，尤其是在高桨距角下这种影响是不能忽略的。
The transverse shear modulus of the composite material is regarded as the function of transverse shear strain, thus the modulus is inVersely computed by the measured values of the strains.
该方法是将复合材料的横向剪切弹性模量视作横向剪应变的函数，由横向剪应变的测量值反演横向剪切弹性模量。剪应变与剪切弹性模量间的函数关系用有限单元法得到。
This model is developed based on the one-dimensional SMA constitutive equation and multi-cell model, and considers the influence of transverse shear deformation of the hybrid composite beam.
采用多胞模型、形状记忆合金一维本构关系分析方法，同时考虑横向剪切的影响，建立了层合梁的数学模型。
This paper compared several mechanical models with transverse shear deformation and put forward a kind of layer model assuming that shear stresses vary parabolically through the plate thickness.
比较了考虑横向剪切变形的几种力学模型，提出了一种新的假定剪应力沿板厚呈抛物线分布的分层模型。
Besides the usual membrane stresses and stress couples the equation also contains additional terms reflecting the influences of transverse shear deformation, rotatory inertia and transverse extrusion.
该方程除了包含通常的薄膜内力项和内矩项外，还反映了横向剪切影响、转动惯性效应和横向挤压影响。
In accordance with the special characteristics of this type of ship, a proper load predication method is adopted for hull longitudian strength, shear strength and transverse strength.
本文针对船型的特殊性，采用了适宜的载荷预报方法，妥善地解决了该船体的总纵强度、剪切强度及横向强度。
General analytic solutions for transverse bending of anisotropic rectangular plate using first order shear deformation theory is obtained at the first time by the complex series method (CSM).
采用复级数方法首次建立了基于一阶剪切变形理论的各向异性矩形板横向弯曲一般解析解。
In this paper, the shear transverse distribution on the beams of bridge is researched using data of model tests and computation in the finite difference method.
本文通过模型实验和有限差分法电算，对桥跨结构主梁剪力横向分布进行了研究。
The parameters in the aeries include: amount of longitudinal reinforcement, amount of transverse reinforcement, shear span-to-depth ratio, thickness of tube wall and strength of concrete.
试验中的主要参数有：纵向钢筋的数量、横向配筋率、剪跨比、管壁的厚度及混凝土强度。
应用推荐