This matching makes the process of transfer far less wasteful than it is with a traditional transformer-based adaptor.
比起传统的基于变压器制造的适配器，按需电量调节的充电法大大降低了不必要的浪费。
Creating the Transformer cubes is a simple process that is based on the selected option boxes located in the Reports section.
Transformercubes的创建是一个简单流程，基于Reports部分中的选项框的选择情况。
Based on finite element method (FEM), the vibration of power transformer windings caused by electrodynamic force is analyzed.
利用有限元算法分析了三相电力变压器绕组各线匝在不同运行模式下电动力引起振动。
Based upon the analysis of an equivalent circuit for distribution transformer with three windings, an engineering calculation method for the reactance and parameters of this transformer is introduced.
在分析研究三绕组配电变压器等效电路的基础上，介绍了三绕组配电变压器阻抗及等效电路参数的工程计算方法。
Transformer condition assessment is the basis of the transformer condition based maintenance.
变压器状态评估是实现其状态维修的基础。
This class is based on the Xalan's sample transformer class and for the most part, should not require any further development from you.
该类基于Xalan的示例转换器类，一般来说，应该不需要进行任何进一步的开发。
Development of virtual instrument based calibrator for electronic current transformer.
基于虚拟仪器的电流互感器校验仪的研制。
The judgment of transformer insulation condition, which is based on preventive test and DGA, has played an important role of accident prevention for a long time.
长期以来，根据预防性试验和油中溶解气体的气相色谱分析结果判断变压器的绝缘状况，对防止事故的发生起到了很大作用。
Based on magnetic circuit of three-leg core transformer the transient model of the transformer is presented.
以三心柱变压器铁心的磁路为基础，建立了该种变压器的暂态模型。
We propose the method for Bayesian network based transformer synthesized condition evaluation and devise the Bayesian network condition evaluation model.
提出了基于贝叶斯网络的变压器状态综合评估方法，建立了贝叶斯网络状态评估模型。
A novel principle of transformer protection using equivalent instantaneous leakage inductance, based on the transformer model loop equation, is proposed.
在变压器模型回路方程的基础上，应用等效瞬时漏电感，提出了一种新型变压器保护原理。
The algorithm of faults diagnosis for transformer based on fuzzy optimum distance is discussed. The inference, calculation and simulation of algorithm is given.
提出了一种模糊距优距离的变压器故障气体分析诊断算法，给出了该算法的推理、计算及仿真结果。
Dead Angle of differential currents is to be measured when realizing the transformer differential protection based on the dead Angle principle.
在间断角原理变压器差动保护中，需要测量差动电流导数波形的间断角。
Transformer status monitoring and health diagnosing based on electric quantity is another important aspect of this paper.
基于电气量的变压器状态监测与健康诊断是本文的另一重要研究内容。
A new scheme for transformer backup protection based on longitudinal comparison principle is proposed.
提出了一种基于纵联比较原理的变压器后备保护新方案。
From the angel of minimizing the inverse transformer capacity, a method to design inverse transformer capacity based on the technical features of mine-well hoist was given.
通过从如何减小逆变器的装置容量入手，根据矿井提升机的工艺特点，给出了斩波串级调速系统逆变变压器容量的设计方法。
In this paper, a transformer tap position tracing estimation algorithm based on turn ratio changing detection is proposed.
本文提出一种基于变比变化检测的变压器抽头位置跟踪估计算法。
An optimization design system of power transformer is constructed based three DE sign styles: integration design, analogy design and optimization design.
基于综合设计、类比设计、优化设计三种设计方式构建了电力变压器优化设计系统。
By electromagnetic theory analysis, this paper presented a planar hollow coil current transformer based on printed circuit board (PCB).
通过电磁理论分析，提出了一种基于印刷电路板(PCB)的平面型空心线圈电流互感器。
This thesis introduces the digital instrument transformer test set based on wave analysis. And it emphasizes on discussing its theory and realization method.
介绍了一种基于波形分析的数字式互感器校验仪，着重论述其测差原理及实现方法。
A transformer substation management method based on object oriented technique is introduced for overcoming the shortage of the management.
针对变电管理工作的不足，提出了一种基于面向对象技术来实现变电管理的有效方法。
The optical fiber transformer based on an optic electric conversion with low noise gains voltage measurement accuracy of 0.2%, satisfying the requirements of transient signal measurement.
基于低噪声光电探测电路设计的光纤电压互感器可获得0 .2 %的电压测量精度，并满足暂态信号的测量要求。
Expert system of transformer fault diagnosis based on knowledge base is posed and general structure of system and object-oriented model are discussed in the paper.
提出了基于知识库的变压器故障诊断专家系统。文中给出系统总体结构模型和面向对象模型。
A novel technology about harmonic restraining transformer based on resonance -circuit and magnetic air-gap shunt (RMsT) is presented.
提出了一种基于带气隙磁分路和谐振电路抗谐波干扰变压器的技术。
The synthetic diagnosing of transformer faults based on dissolved gas-in-oil analysis (DGA) is introduced.
介绍了基于油中溶解气体分析（DGA）的电力变压器故障综合诊断。
The optimal design method of oil-immersed distribution transformer based on the TOC method is presented.
提出了基于能效评价方法的油浸配电变压器优化设计方法，并给出了实例。
A novel microwave ferrite thin-film transformer based on Si IC technology was presented.
实现了一种新型的基于硅ic工艺的微波铁氧体集成薄膜变压器。
This paper presents the design of a monitoring terminal for distribution transformer based on C8051F020MCU, introduces the realization methods of hardware and software.
文章主要介绍了以C8051F020单片机为核心的配电变压器监测终端的设计方案，并给出了硬件和软件的实现方法。
This paper presents the electrical design solution for the transformer dry system based on SIMATIC S7-200 PLC, and introduces partly design of control circuits and control programs.
提出了基于西门子S7-200PLC的变压器干燥系统的电气设计方案，介绍了部分控制电路及控制程序设计。
This paper presents the electrical design solution for the transformer dry system based on SIMATIC S7-200 PLC, and introduces partly design of control circuits and control programs.
提出了基于西门子S7-200PLC的变压器干燥系统的电气设计方案，介绍了部分控制电路及控制程序设计。
应用推荐