Application: As lining of material transfer pipe and chute, etc. on steel industry.
应用领域：钢铁行业物料输送管道、溜槽等的内衬。
The effect of axial heat conduction on a heat transfer pipe is analyzed by numerical method.
通过数值计算方法对传热管轴向导热的影响进行了分析。
The heat carrier heating, blow down and liquid recovery pipeline of the transfer pipe was changed.
改变了移液管的热载体加热、放空管线和回液管线。
This article presents the production technology, performances and application of powder metallurgic heat-transfer pipe used for heat exchanger.
本文介绍了换热器中使用的粉末冶金传热管的生产工艺、性能和应用。
This paper introduced a special machine technology of applied in aluminium metallurgy profession for dense phase transfer pipe paint anti-corrosive and anti-friction.
本文介绍了一种铝冶炼行业氧化铝浓相输送管道防腐耐磨剂刷涂专机技术。
This paper focuses on effects of the valve characteristics and the transfer pipe delay on dynamic performance for boiler drum level, under varying valve opening of the feed water control valve.
本文着重探讨当给水调节伐门开度变化时，伐门特性以及管路传输迟延对锅炉汽包水位动态特性的影响。
Using the fluid differential unit, the heat transfer mathematic model of heat pipe bioreactor (HPBR) was established by the calculated fluid hydrodynamics (CFD).
从流体微元出发，用计算流体力学（CFD）的方法建立热管生物反应器的传热数学模型。
In the outer loop this heat-transfer medium (Freon) is directed into the capillary pipe for pressure release.
在外层循环传热介质(氟利昂)直接到毛细管管压力释放。
The buried pipe transfer equation, the frequency character and the attenuation equation of the leak signal are studied.
研究了埋地管道泄漏信号波的传播方程，泄漏信号频率特性以及衰减方程。
A parallel pipe or coil of water connected by a black plate, passing through a series of or other heat transfer fluids.
黑色板相连的平行管或一盘管的水，通过一系列或其他热传导液通过。
This essay described the FEM simulation of plastic pipe extrusion: the factors of melt line formation and heat transfer of cooling processing were mainly discussed.
本文利用有限元法对塑料管材的挤出进行模拟。主要讨论了影响塑料管材挤熔接痕形成的因素，以及管子冷却过程的热传递。
A numerical analysis of the heat and mass transfer in a heat pipe type falling film absorber was carried out, in which solution absorption and removal of absorption heat happened through heat pipe.
对热管式降膜吸收器溶液吸收传热传质并通过热管移出吸收热的过程进行了数值研究。
On the base of both consideration of heat transfer performance and resistance, the optimization and research are carried out on single spiral duct double pipe condenser.
本文在综合考虑传热性能和摩擦阻力等因素的基础上，对单螺旋槽套管式冷凝器的结构进行了优化和研究。
The working principles, structure, and heat transfer characteristics of the gravity heat pipe heat exchangers, and their application in production of pyromellitic dianhydride anhydride were presented.
介绍了重力热管换热器的工作原理、结构和传热特性，以及重力热管换热器在均苯四甲酸二酐生产中的应用情况。
The effect of heat source location on the heat transfer of an axially grooved heat pipe was investigated.
探讨了轴向槽道热管垂直安装时热源位置的不同对热管工作特性的影响。
The heat transfer and flow pass condensation segment in the gravity heat pipe with inner screw thread were investigated.
分析了在重力热管内加内螺纹的方法，研究了重力热管的冷凝段的传热及流动状况。
The finned pipe has been used widely in the heat transfer equipment, such as heating radiator.
翅片管的强化传热在采暖散热器等设备上有着广泛的应用。
The heat transfer characteristic of spiral-grooved pipe and its application result are introduced.
分析了螺旋槽管强化传热等特性，并介绍了应用效果。
This paper presented influence of factor on film cooling, enhanced heat transfer in tunnel and heat pipe cooling, how to apply and development for these technologies.
详细地阐述了对气膜冷却、内部强化换热以及热管冷却等的影响因素，目前的应用状况以及发展前景。
The heat transfer experiments were made in the working of temperature range of the naphthalene heat pipe, at small inclination Angle.
根据萘热管的工作温度范围，对萘热管小倾角放置时的传热极限进行了实验研究。
An unsteady heat transfer model was sot up and solved by numerical solution for the heat transfer characteristic of U-pipe heat exchanger and the interaction of the two pipe legs of the GSHPs.
针对U型管埋地换热器的传热特点，考虑了两管脚之间的相互影响，建立起非稳态传热模型。
The heat transfer experimental characteristics of immersed pipe is very useful to control combustion and heat transfer.
试验表明内旋流流化床内的埋管传热特性更有利于控制燃烧和传热。
Experimental study shows that the heat pipe cold plate equipment possesses excellent heat transfer performance and temperature evenness, and satisfies design requirements.
试验结果表明，所提出的热管冷板传热性能和壁面均温性能良好，满足设计要求。
On the resistance of capillary hysteresis, the model of high power pulsating heat pipe is improved and the flow and heat transfer are further studied.
在毛细滞后阻力方面，改进了所建立的高功率脉动热管的模型，进一步研究了脉动热管的流动和传热特性。
Heat pipe is an efficient heat transfer device by means of the phase transition of the working fluid.
热管是一种利用工质相变进行热量传递的高效传热元件。
The evaporation model of micro heat pipe with triangular cross section was presented by analyzing both the heat transfer through the thin liquid film and the heat conduction along the heat pipe wall.
通过对薄液膜蒸发传热以及热管壁轴向导热的分析，对三角形截面微型热管的蒸发段建立了蒸发传热模型。
Heat transfer in rectangular pipe with longitudinal vortex generators were investigated under transitional flow using water as working fluid.
将纵向涡强化换热技术应用于矩形管槽，研究以水为换热介质在过渡流状态下的换热效果。
Heat transfer in rectangular pipe with longitudinal vortex generators were investigated under transitional flow using water as working fluid.
将纵向涡强化换热技术应用于矩形管槽，研究以水为换热介质在过渡流状态下的换热效果。
应用推荐