Traditional PID control is used to control the water pressure.
对声管内液体的压力控制将采用常规的PID控制。
The most traditional PID control is widely used in industrial control.
PID控制是工业过程控制中应用最广泛的传统控制方式。
Currently the traditional PID control is used in the central air-condition system.
当前中央空调系统的控制主要采用的还是传统的PID控制。
Though the traditional PID is simple, the settling time is long and the effect is un- ideal.
通常所采用的传统PID控制算法虽然简单，但系统调节时间较长，控制效果不理想。
The dynamic and static performance are both better than traditional PID control and fuzzy control.
动静态性能均优于传统的PID控制和模糊控制。
The traditional PID control and fuzzy adjustable PID control are both used for designing the controller.
控制器采用传统PID控制和模糊自适应PID控制两种控制方案。
Because of the great load inertia, high accuracy and speed, traditional PID algorithm does not work well.
由于系统的负载惯量大，控制精度高、速度快等特点，传统PID算法已远不能满足性能要求。
Neural network intelligence PID controller has many advanced properties compared with traditional PID controller.
同传统的PID控制相比较，神经网络智能PID控制有许多优点。
Results show that it is superior to traditional PID controller in performance and improves greatly system performance.
结果表明，它比常规pid控制器性能优越，使系统性能显著提高。
The thesis adapts traditional PID control and intelligent PID control theories to study the design of UAV's fight control law.
本文主要利用常规PID控制和智能PID控制的理论来研究无人机飞行控制律的设计。
The stable design rules of the fuzzy PID controller were obtained based on its relationship with the traditional PID controller.
最后利用模糊PID控制器与传统PID控制器的联系，进一步推算出符合稳定性要求的模糊PID控制器设计规则。
The results show that the controller is better in comparison with traditional PID controller, especially under strong disturbance.
结果表明，滑模模糊控制的性能明显优于PID控制，在强干扰时表现出良好的鲁棒性。
The model test results show that it basically achieves the goal and show the advantage through comparing with traditional PID method.
最后通过对模型的测试，采用蚂蚁算法优化后的控制方法基本达到了要求目标，与传统PID控制方法相比较，显示了其优越性。
In a system of the hydraulic control, it is difficult to reach the request of high degree of accuracy using the traditional PID strategy.
在液压控制系统中，采用传统的PID控制策略难以达到高精度的要求。
But a traditional PID controller cannot obtain a good effect on real-time controlling, owing to uncertain controlled object and environment.
但传统的PID控制由于控制对象和环境的不确定性，往往难以达到满意的实时控制效果。
Permanent magnet synchronous motor is a multi-variable, non-linear and strong-coupling system, the traditional PID control is not effective.
永磁同步电机是一个多变量、非线性、强耦合的系统，传统PID速度控制效果不理想。
For the shortage of fuzzy controller, the double model controller was adopted, optimizing fuzzy controller through traditional PID controller.
针对模糊控制算法的不足，建立了双模控制器，用传统的PID算法优化模糊控制器。
Compared with the traditional PID electrode regulator system of EAF, the simulating results show the advantage of self-adaptive control system.
与传统的PID控制相比较，结果表明自适应控制系统优于PID控制系统。
PID gain predictive control based on two approximation model is proposed for the problems of the traditional PID control and predictive control.
提出一种基于二次逼近模型的PID增益预测控制，并阐述了该系统的结构、算法和应用特点。
The typical motion-controlling chip is based on the traditional PID controlling tac tics, which cannot meet the requirements of high performances.
常见的运动控制芯片采用传统的PID控制策略，无法满足高性能要求。
But a traditional PID controller can not obtain a good effect on line real time controlling, owing to uncertain controlled object and environment.
但常规的PID控制由于控制对象和环境的不确定性，往往难以达到满意的实时控制效果。
The traditional PID control theory is proposed, and then the UPFC's PI controller is designed based on UPFC's static model and its control variables.
本文先采用传统的PID控制原理，基于UPFC静态模型及其控制量设计了UPFC的PI控制器。
Simulation show that this control method can improve the system's dynamical performance and its static accuracy in comparison with the traditional PID control.
仿真结果表明，该控制方法比传统PID控制更好的改善了系统的动态性能，提高了稳态精度。
FA467 roving frame control system is a large inertia and nonlinear system, traditional PID and self-adaption control method can not satisfy the need of this system.
FA467粗纱机控制系统属于大惯量、非线性时变系统，采用传统的PID和通常的自适应控制都不能满足本系统的要求。
Traditional PID controller has the characters of simple structure, robustness, easy to implement and so on and has been applied widely with a very good control effect.
传统PID励磁控制器结构简单，具有一定的鲁棒性，容易实现，有着广泛的应用，并取得了良好的控制效果。
Simulation results show that the controller is better in comparison with traditional PID controller, and it has stronger robustness for the change of system parameters.
仿真结果表明，滑模变结构控制的性能优于常规的PID控制，在系统参数变化时表现出更强的鲁棒性。
This paper introduces the single neural cell adaptive control based on the traditional PID controller and puts the optimization goal of the engine speed control system.
本文在常规的PID控制的基础上引入单神经元自适应控制，提出了发动机转速控制的优化目标。
Compared with traditional PID control methods, it reveals the advantage and deficiency of intellectual control which have a good control and the ability of anti-jamming.
并引进了一些智能控制的方法，与传统PID控制方法进行了性能对比，仿真结果表明智能控制具有控制效果好、抗干扰能力强等优点。
The simulation and motor control show that the new algorithm has fast learning rate, good convergence properties and can overcome the defects of traditional PID algorithm.
仿真实验及在伺服电机转速控制中的应用表明，该算法具有较快的学习速度及良好的收敛性能，并有效地克服了传统PID算法的缺陷。
A multiply method based on fuzzy control for secondary controlled hydraulic system is given, which USES advantages of fuzzy control, as well as the traditional PID method.
对二次调节控制系统，提出了一种基于模糊控制的复合控制方法，此方法利用了模糊控制的优点，又保留了传统PID控制的长处。
应用推荐