The optimum earn outline is obtained rarely by the traditional design method.
采用传统的设计方法，很难求得凸轮的最佳轮廓。
Optimization design which is different from traditional design method is introduced.
介绍了与传统设计方法不同的优化设计。
Actual calculation shows that optimization has great advantages than traditional design method.
实际算例表明，优化设计比传统设计有很大的优越性。
The methods of automobile design can be divided into the traditional design method and modern CAE technology.
汽车的设计方法分为传统的设计方法和现代的CAE技术。
The system may change the traditional design method and enhance design efficiency, and has some practicability.
此系统改变了传统的设计方法，提高了设计效率，具有一定的实用性。
In this paper, parts reverse design method and process, as well as other traditional design methods are mainly summarized.
本文主要概括了零件逆向设计方法与过程和其他传统的设计方法。
Because the traditional design method of axial flow air compressor was not perfect, it made the assembly work at low efficiency.
由于轴流压气机传统的设计方法不完善，使得基于此种方法设计的机组效率低下。
The instance shows that optimum design by discrete composite shape arithmetic has more advantages than traditional design method.
实例计算表明，用离散复合形法的优化设计比传统设计有较大优越性。
The LNA design method which absorbs the parasitic capacitance of ESD is introduced and compared with the traditional design method.
同时提出了将ESD的寄生电容吸收到LNA输入匹配网络中的设计方式，并与传统的计算方式做了对比。
There are many problems in traditional design method such as long period, structure redundancy, high cost and lack of validation etc.
传统的设计方法存在设计周期长、结构冗余、成本高、缺乏对结果的验证等诸多弊端。
The method avoids the defect of traditional design method using experience, easy to realize optimum match between system component parts.
该方法避免了传统经验设计方法的缺陷，容易实现系统内各部件的最优匹配。
Due to the complex structure and large diameter of the RC silo of containing coal, it is impossible to analyze it with traditional design method.
大型预应力钢筋混凝土储煤筒仓结构新颖，受力复杂，其直径超出了筒仓规范规定，无法按常规设计方法对其进行结构计算。
Comparing with traditional design method, this design method has characteristics of simple peripheral circuit, easy modificative procedure and debugs, etc.
该设计方法与传统的设计方法相比，具有外围电路简单，程序修改灵活和调试容易等特点。
Only one kind of navigation mode can be performed and informations of one kind of navigation mode can be maintained in SINS with traditional design method.
传统的设计方法在具体条件下只实现一种工作方式，保持一种方式的导航信息。
This article studies the traditional design method of progressive drawing process according to the knowledge engineering theory combined with punch process.
依据知识工程理论，并结合冲压工艺，对连续拉深工艺传统设计方法进行了研究。
The structure, size of the design with the traditional design method of the milling shaft groove clamp the overall structure and the various parts of the design.
本设计中以机床夹具为例，介绍了夹具的不同分类及铣轴端槽夹具的基本结构和工作原理，并设计了铣轴端槽夹具的结构和其构成零部件的结构及尺寸。
Through comparison between traditional design method and modern design method, it is concluded that the use of modern design method in bearing design is necessary.
通过传统设计方法与现代设计方法的比较，得出在轴承设计中运用现代设计方法的必要性。
Unlike other traditional design method of ship dynamic positioning fuzzy controller. This paper use Tagaki-Sugeno fuzzy logic system to design the fuzzy controller.
不同于其他动力定位船舶模糊控制器设计，本文采用基于高木—关野模糊逻辑系统的方法设计模糊控制器。
The result shows that the method proposed by this paper is more convenient and more efficient than the traditional design method based on the slot-vector star graph.
结果表明，该方法比传统的基于槽矢量星形图的设计方法要方便和有效。
In order to repair the flaws of traditional design method, it is reasonable to introduce the Monte Carlo method to the reliability design and analysis of gun components.
为了弥补传统的设计方法带来的缺陷，将蒙特卡洛方法引入枪械零件的可靠性设计与分析。
With the high speed of the development of the national automobile industry, traditional design method can no longer satisfy the quickly responding requirement of the market.
随着我国汽车工业的飞速发展，新车型推出的速度越来越快，传统的设计方法已经不能满足产品更新换代的快速响应要求。
Aimed at the deficiencies of traditional design method for valve train CAM, a new method for designing CAM profile with analysis functions and numerical synthesis is proposed.
重点针对配气凸轮传统设计方法的缺陷，提出一种用解析函数法与数值法相结合设计凸轮型线的新方法。
The comparison of the method and the traditional design method of pedestrian phases demonstrates the new method can shorten the minimum green time, and reduce pedestrian delay.
与传统行人相位设计方法的对比分析表明这种行人相位设计方法缩短了行人过街最短绿灯时间，降低了过街人均延误。
The traditional design method of the crescent rib on the screw-thread steel finished product passes is very overelaborate and the results obtained based on it have some errors.
螺纹钢成品孔月牙肋的传统设计法不仅繁琐，并且据此而得出的结果有误差。
The method with the traditional design method, not only can significantly reduce the workload, shorten the design cycle, and can improve the accuracy and stability of the device.
该方法与传统的设计方法相比，不但可以大量减少工作量，缩短设计周期，并且能提高器件的准确性与稳定性。
The method with the traditional design method, not only can significantly reduce the workload, shorten the design cycle, and can improve the accuracy and stability of the device.
该方法与传统的设计方法相比，不但可以大量减少工作量，缩短设计周期，并且能提高器件的准确性与稳定性。
应用推荐