The total deformation of the structure is not obvious, and there isn't any abnormal phenomenon.
建筑物变形总体不大，无异常现象。
The sum of spring forces is corresponded with external force, and the sum of displacement of each node equal to the total deformation.
系统中各个质点的相对位移的叠加对外等效为物体表面变形，与之相连的弹簧弹性力的合力等于物体表面的接触力。
The stress and displacement of each node and total deformation of pipe string are computed which at different temperatures and pressure work conditions.
计算了管柱在不同温度和压力工况下管柱轴力、各节点应力、位移和整个管柱总变形量。
Exert hot stress and external force (such as border terms) that temperature cause as the strength load the object and then, try to get total deformation amount.
再将温度引起的热应力和外力(如边界条件)之和作为力载荷施加到物体，求得总变形量。
The analysis and the spot measure data prove the deformation of composite soil nailed wall include shear deformation, bend deformation and total deformation of soil.
由实测和理论分析表明复合土钉墙的变形是由剪切变形、弯曲变形以及墙底基底以下土体变形组成。
The total deformation of soils consists of three parts: elastic strain, plastic strain related to volumetric yielding mechanism and plastic strain related to shear yielding mechanism.
土体总的变形由三部分组成：即弹性应变、与体积屈服机制相关的塑性应变和与剪切屈服机制相关的塑性应变。
Directional solidification could improve hot rolling formability of magnesium ingot effectively. The total deformation could reach 94% without cracking when hot rolling was held at 673k.
定向凝固工艺可有效提高镁合金铸锭的热轧成形能力，在轧制温度为673k的条件下进行热轧，总变形量可达94%以上而不出现裂纹。
But how to effectively exert the efficacy of the Total station in the deformation monitoring, it is necessary to master the technical characteristics and develop its application into practice.
但如何使全站仪更有效地在水电站变形观测中发挥作用，则必须通过了解其相关的技术特性，探索全站仪在实践中的应用。
It pointed out the deficiency of the monitoring method of the previous department, and proposed using Electronic Total Station to make 3d deformation observation of foundation pit.
指出了以前部分监测方法的不足，提出了利用全站仪对基坑进行的3维变形观测的方法，以及对该测量方法的精度论证。
When sailing in waves, ship hull total bending deformation will reduce the center distance of gear backing radially arranged in ship hull.
船舶在波浪中航行时，船体总弯曲变形会使沿船体纵向布置齿轮机构的轴承支座中心距产生缩减。
According to the total strain energy failure theory author provides calculate formula of creep Life loss in creep deformation accumulation of steam pipe.
根据总应变能理论，作者提出按管子累积蠕变变形量计算寿命损耗量。
The forecasting results illuminated that the chief effect to deformation is the total load and the following is effect time, so the test rock has evident rheological characteristic.
结果表明该岩石的变形最主要的影响因素是总荷载，其次是持续时间，这表明该岩石具有明显的流变效应。
The effects played by transverse shear deformation, panel geometric parameters, total number of plies, fiber orientation, and initial geometric imperfections are studied.
讨论了横向剪切变形，曲板几何参数，铺层数，铺展方式和初始几何缺陷等各种参数变化的影响。
The first-order derivative equal to zero of total potential energy with respect to the relative shear deformation of shear band leads to the equilibrium condition of elastic rock.
将系统的总势能对相对剪切变形求一阶导数（等于零），得到了弹性岩石的平衡条件。
The theory and the formula of the deflection deformation survey with total station instrument were introduced, and the survey accuracy was analyzed.
论文介绍了全站仪法测量桥梁挠度的原理和计算公式，并对全站仪法观测桥梁挠度变形值的测量精度进行了分析。
They also show that a finer grain size can be obtained by dynamic recrystallization during superplastic deformation at a high strain rate, but the total elongation to failure is limited in about 135%.
合金在高应变速率的变形中通过动态再结晶可获得更细的晶粒尺寸，其断裂时总延伸率在135%左右。
In the program the large deformation are considered by using Total Lagrange described method and time discreteness with Newmark method.
程序中考虑了结构的大变形，采用全拉格朗日描述法，时间离散使用了纽马克法。
At the same time two nonlinear finite element equations for large deformation problem are introduced: the Total Lagrange approach and the Updated Lagrange approach.
同时介绍了大变形问题的两种非线性有限元方法：全拉格朗日法T。
For plastic deformation theory, it is assumed that the plastic strain tensor is proportional to the total strain deviation tensor and the ratio is a sealer 'function of the effective total strain.
对于形变理论，假定塑性应变张量与总应变偏量张量成比例，其比例因子是总有效应变的标量函数。
The deformation from geometrical reflection for Gaussian light pulse under total internal reflection at a planar interface are discussed.
本文研究了高斯型脉冲光束在界面上发生全反射时与几何光学不相一致的一些现象。
The trend of river bed deformation calculated by a plane 2-D numerical model of total sediment transport is in good agreement with the real conditions.
通过选择有关参数，处理工程边界以及进口边界条件，用二维河道全沙数学模型计算所得的河床变形趋势与实测情况基本一致。
To study the load distribution of hollow roller bearing, the iterative algorithm is adopted based on understanding the construction of the total elastic deformation of roller and raceways.
为了分析空心圆柱滚子轴承的载荷分布，在分析滚子与内外滚道接触变形量构成的基础上，提出了空心圆柱滚子载荷分布的迭代算法。
Physical and chemical structure and plastic deformation of self-pressure by total CuW Contact are analysed, and practical measures to solve the problems are proposed.
对整体式自力型铜钨触头的理化情况和塑性复形问题进行了分析，提出了解决问题的具体措施。
Finally, the total mechanical deformation of seal rings can be obtained by superposition of the results due to the external loads and the edge loads respectively.
最终，对应地迭加在外载荷及边缘载荷作用下的变形数据，即可求出密封环端面的总变形值。
The eigen-relaxation time and eigen-function for viscoelastic toroidal deformation can be analytically given when the total layer number is up to 6 between CMB and earth surface.
当核幔-地表小于6个分层时，本文能解析地给出了粘弹性地球环形场的特征松弛时间。并写出了地表剪切应力激发下的特征函数表达式。
Raceway and rolling body and the total permanent deformation of the corresponding radial static load (center of the axial static load).
与滚动体及滚道的总永久变形量相对应的径向静负荷（中心轴向静负荷）。
It is concluded that the total strain theory can be used as a substitute for the incremental strain theory to analyse the force and deformation in sheet metal deep-drawing process.
结果表明，全量理论可代替增量理论分析、计算拉延成形过程的力和变形等。
It is concluded that the total strain theory can be used as a substitute for the incremental strain theory to analyse the force and deformation in sheet metal deep-drawing process.
结果表明，全量理论可代替增量理论分析、计算拉延成形过程的力和变形等。
应用推荐