It is necessary to compute the screw hydrostatic torque in designing the teeth profiles of screw pumps.
当设计螺杆泵转子的齿形时，需要计算它们的液压扭矩。
Low torque required to drive the load due to high efficiency ball screw.
低扭矩所需的驱动负载，由于高效率的滚珠丝杠。
In addition, the adjustment of the synchronous gear makes the screw does not contact, at the same time the output torque of the half to driven screw.
此外，调整同步齿轮使得螺杆不接触，同时将输出扭矩的一半传给从动螺杆。
Torque setting precision, torsion of high precision, especially suitable for mobile phones, digital cameras contour precision screw assembly work of the product.
扭距设置精准，扭力精度高，特别适用于手机、数码相机等高精密产品的螺丝装配工作。
The fast response and stable output of the torque are key techniques of electric screw press.
转矩的快速响应和稳定输出是电动螺旋压力机稳定运行的关键。
Ball screw using ball movement, so the starting torque is very small, does not appear sliding movement crawling phenomenon, so can ensure accurate micro feed.
滚珠丝杠利用的是滚珠运动，因此启动力矩极小，不会出现滑动运动那样的爬行现象，故而能保证实现精确的微进给。
The native starch was transformed to thermoplastic starch (TPS) by the torque rheometer, single screw extruder and plasticizers.
利用转矩流变仪、单螺杆挤出机和增塑剂将天然淀粉转变为热塑性淀粉（TPS）。
The paper focuses on the study of dynamics parameters that include flow rate, power consumption, torque and axis force of twin screw pulping extruder.
本文主要对双螺杆磨浆机的动力学参数(流率、功耗、螺杆扭矩和轴向力)进行了研究。
Metrical experimental studies on screw torque, axial thrust, barrel inwall pressure of twin screw pulping extruder (TSPE) were done.
对双螺杆磨浆机的螺杆扭矩、轴向推力和机筒压力进行了测量实验研究。
With the input shaft key secured with a set screw, an input and output shaft key configuration delivers optimum positive connection for superior torque transmission.
输入轴键受到固定螺钉的保护，输入和输出轴键配置实现最佳的刚性连接以提供更好的扭矩传送。
Syndesmosis width significantly increased when the screw was inserted in dorsiflexion for 5 Nm of torque.
当踝关节背伸位、下胫腓螺钉以5nm扭矩植入时，下胫腓宽度明显增加。
Against the status, PM brushless torque motor to drive screw pump directly was adopted by the paper, and the correlative problem was studied.
针对这种情况，本文采用永磁无刷力矩电机直接驱动螺杆泵，并对其相关问题进行了研究。
Results: There was no significant difference of screw insertion torque and the pull-out strength between each group.
结果：各组最大螺钉旋入力矩、抗拔出力差异无统计学意义。
In addition, the adjustment screw is not synchronized gear makes contact, at the same time pass on half of the output torque driven screw.
此外，调整同步齿轮使得螺杆不接触，同时将输出扭矩的一半传给从动螺杆。
Use magnetic torque type capping heads, automatic grasping cover, screw cap, immutability torque capping function.
采用磁力扭矩式封盖头，自动抓盖、拧盖，有恒力矩封盖功能。
This paper introduces the structure, working principle and its application of torque control screw.
介绍了扭矩控制螺栓的结构和工作原理以及它的应用。
It also provides valuable torque information such as: definitions, abbreviations, screw torque values, and types of joints and more.
它还提供了诸如定义，缩略语，螺杆扭矩值，以及连接的多种类型等扭矩信息。
Using magnetic torque type screw head cover, to achieve grasping cap, screw cap function.
采用磁力扭矩式拧盖头，实现抓盖、拧盖功能。
NSK-I type of controller of the tightening up a screw machine is a new type of the torque controller. It has achieved continuous adjustment to the torque of the controlled motor.
型拧丝机控制器作为一种新型的力矩控制器，实现了对被控电动机力矩的连续调节。
Testing the torque of screw to confirm if it meets the specifications.
检查螺丝之扭力是否符合规格。
Screw cap torque stepless adjustable, with constant torque rotary sealing plastic lid function, without injury cover, tight and reliable seal.
拧盖力矩无级可调，具有恒力矩旋封塑盖功能，且不伤盖，封口严密可靠。
The control method can make the machine unload at arbitrary torque to meet the need of screw-on or screw-off for connecting pieces of different threads.
通过使用该种控制法，可使液压拧扣机在任意扭矩下卸荷，以满足不同规恪螺纹连接件上卸扣的需要。
Plastication torque, balance torque and processing energy consumption at the condition of single-screw processing are larger than those of double-screw processing condition.
单螺杆挤出材料的塑化转矩、平衡转矩和加工能耗均较双螺杆的略大。
High torque and excellent performance of hydraulic motor can drive screw directly and shorten plasticizing time so that saves energy.
采用高扭力、效率佳之油压马达，直接驱动螺杆，可缩短塑化时间节省能源。
The utility model belongs to the torque testing device of the screw pump well on an oilfield pump recovery wellhead.
本实用新型属于油田机采井口上的螺杆泵井扭矩测试装置。
The control system solves the technical problems of the poor control accuracy, instable torque during assembly and on the like of the prior screw-down tool.
它解决了现有拧紧工具控制准确度差、装配时扭矩不 稳定等技术问题。
Recommended torque on screw: 3 inch LBS.
螺杆扭矩推荐：3英寸磅。
The first difference is that a torque-limiting screwdriver is useful during placement of the locking head screw.
第一个区别是在拧入锁定头螺钉时的扭矩限制扳手非常实用。
The first difference is that a torque-limiting screwdriver is useful during placement of the locking head screw.
第一个区别是在拧入锁定头螺钉时的扭矩限制扳手非常实用。
应用推荐