The research is useful in selecting the tool geometry, coolant and cutting parameters in machining this kind of superalloy.
研究工作对该材料加工过程中的切削用量、冷却液和刀具几何参数等的选择具有指导和参考意义。
Proposed that a metal cutting database is basically composed of databases of cutting data, tool geometry angles, cutting fluid and unit cutting power.
提出由切削用量库、刀具几何角度库、切削液库和单位切削功率库基本构成金属切削数据库，给出了它们的关系模式。
This paper explains the character of tool materials, tool geometry and small combined boring tools for machining aluminum alloy on the basis of the practice and research.
以摩托车发动机箱体及箱盖的加工自动线刀具为例，指出加工铝合金时刀具材料和几何角度应注意的问题，另外对小孔加工复合刀具进行详细的说明。
Some practical problems of this technology, such as tool material selection, special optimization index of cutting parameters and tool geometry determination, are discussed as well.
本文还深入讨论了刀具材料、特定的切削用量优化指标以及刀具几何参数确定等实际技术问题。
This paper deals with oscillatory feed cutting which is a reliable chip breaking method and can be applied regardless of the materials processed, cutting parameters and tool geometry used.
本文研究的振荡切削法，是一种不受工件材料、切削用量和刀具几何形状限制的可靠断屑方法。
The conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.
对金属切削有重要影响的条件有工件材料、刀具材料、刀具几何形状、切削速度、进给率、切削深度和所用的切削液。
Proposed that a metal cutting database is basically composed of databases of cutting data, tool geometry angles, cutting fluid and unit cutting power. Relation models of them are presented as well.
提出由切削用量库、刀具几何角度库、切削液库和单位切削功率库基本构成金属切削数据库，给出了它们的关系模式。
This article introduced the heat-resistant steel machining characteristic and at present USES in cutting the heat-resistant steel the cutting tool material, the cutting tool geometry parameter choice.
介绍了耐热钢切削加工特点及目前用于切削耐热钢的刀具材料、刀具几何参数的选择。
Fredo Scale allows you to twist and bend your geometry, and Fredo ThruPaint is a great tool for UV mapping your textures on challenging geometry without any distortions.
利用自由缩放工具可以扭转和弯曲几何体块，贴图扩展工具是一个很好的工具，当你在一些异形的几何上贴覆材质时，保证效果不会失真。
The selection of a suitable feed depends upon many factors, such as the required surface finish, the depth of cut, and the geometry of the tool used.
合适进给的选择取决于许多因素，例如所需表面光洁度、切削深度和所用刀具的几何形状。
Successful design of tools for the material removal processes requires, above all, a complete understanding of cutting tool function and geometry.
为材料的去除工艺而成功设计的刀具，首先需求的是对工具功能和形状的彻底了解。
From the theoretical model proposed in this work, the surface prole can be deduced from cutting conditions, cutter geometry, cutting tool imperfections and milling machine deviations.
从理论模型中提出的这项工作，表面形貌可从追溯的切削条件，刀具几何形状，切削工具不完善和铣床偏差。
As a mathematic tool of modeling natural geometry, fractal theory has been found wide applications in varied fields with great success.
分形理论作为一种描述客观世界的几何工具，在短短的时间内已成功应用于许多学科。
Here concave type of geometry is the one in which the local center of curvature of workpiece and tool center lie on the same side.
这里凹面型的几何一个在当地的中心曲率的工件和刀具中心所在站在同一边。
Based on the geometry characteristic and processing technique of centrifugal compressor impeller, the tool path of rough and finish machining are scheduled.
分析了离心压气机叶轮的几何结构特点、加工工艺，并在此基础上规划了叶轮的粗、精加工刀具轨迹。
A method is presented by using computational geometry techniques to determine optimal tool position and orientation for 5-axis machining with torus end-mill.
应用计算几何技术来决定优化的刀具定位和刀具姿态以实现环形刀的5轴自由曲面数控加工。
The tool designer must match the many variables to provide the best possible cutting geometry.
刀具的设计者必须配合许多的可变因素来提供最好的切割形状。
Using differential geometry and vector analysis, a new tool-path generation method for freeform surface machining is presented.
以微分几何学和矢量分析为工具，提出了复杂曲面加工路径规划的新方法。
The new spline Mapping tool can map otherwise difficult geometry by using splines to drive the UV generation.
新的样条映射工具，可以地图，否则难以几何用花键驾驶紫外线的一代。
Rationally choose geometry parameter and cutting data of PCBN tool, in order to raise processed quality.
合理地选择PCBN刀具的几何参数和切削用量，以提高加工质量。
Regarded as the traditional 2-d coordinate measuring system, omnipotence tool microscope has the most extensive application in the geometry measurement.
万能工具显微镜作为传统的二维坐标测量系统，在几何测量中具有最为广泛的应用。
MATLAB language and its graphic interface is used to simulate CNC program in geometry and motion, and to simulate the manipulating panel of CNC machine tool in its fundamental function.
将MATLAB语言及其图形界面用于数控加工程序几何及运动仿真，并对数控机床操作面板的基本功能进行操作仿真。
Absrtact: the fractal theory is an effective tool to describe irregular geometry form and structure in nonlinear system and its application is greatly wide.
摘要：分形理论是描述非线性系统中不规则的几何形体的有效工具，应用领域十分广泛。
This paper uses fractal geometry as a tool and fractal dimension as a measurement parameter to analyze the phenomena of fractal attenuation of cartographic object on cartography generalization.
本文以分形作为工具，分维值作为度量参数，研究制图综合中地图目标的分形衰减现象。
The main cause to create harmonic error are the relative vibration in system, in stability of geometry configuration, random disturbance and in sufficient feeding ability of the machine tool.
谐波误差产生的主要原因是系统相对振动、几何布局失稳、随机干扰和机床进给能力不足。
The physical? composition of the workpiece greatly influences the selection of the machining method, the tool composition and geometry, and the rate of material removal.
合成工件很大程度上影响了加工方法的选择，工具的合成及其几何形状，还影响了材料的去除的速度。
The group which is founded by Galois and Abel and the theory which is proposed by Klein provide the tool from the second stage to the third stage of the geometry.
而由伽罗瓦和阿贝尔创立的群的结构并由克莱因提出的几何变换群理论为几何学从第二阶段到第三阶段的转变提供了依据。
The tool, part geometry, machining conditions, tool-path and the material removal process are simulated by computer simulating technology to gain a rational optimized milling plan finally.
通过计算机仿真技术，模拟刀具、工件几何体、加工环境及刀具路径和材料去除的过程，最终在加工之前得到了合理、优化的加工方案。
The tool, part geometry, machining conditions, tool-path and the material removal process are simulated by computer simulating technology to gain a rational optimized milling plan finally.
通过计算机仿真技术，模拟刀具、工件几何体、加工环境及刀具路径和材料去除的过程，最终在加工之前得到了合理、优化的加工方案。
应用推荐