An orthogonal cutting force model with tool flank wear has been analyzed based on cutting test investigation.
在试验研究基础上进行了有后刀面磨损的正交切削模型分析。
According to dynamics, this paper analyses effect of the tool flank wear on cutting force. It gives relationship between the tool flank wear and dynamic cutting force.
本文从动力学角度分析了车削过程中刀具后刀面磨损量对切削力的影响，得出切削力动态成分与刀具后刀面磨损量之间的关系。
As a special case of application, research and application meets difficulties respectively because of high cost of rapid molding sharpening on the tool flank of ellipsoid.
此钻型长期以来由于用成形砂轮刃磨成本过高，研究和应用均遇到很大的困难。
Oxidation wear appeared at the wear edge of rake face and flank face of cutting tool.
硬质合金刀具的氧化磨损主要发生在刀具前刀具和后刀面的磨损边缘区。
In many cases of stainless steel cutting operations with carbide tools, a tool life strongly depends on flank notch wear of depth of cut rather than average flank wear of main cutting edge.
硬质合金刀具在不锈钢加工中，其刀具耐用度主要是取决于后刀面边界磨损而不是主切削刃后刀面的平均磨损量。
Clearance Angle. This is the Angle between the machined surface and the underside of the tool called the flank face.
这是机加工面与被称为后侧面的刀具底面夹角。
By analyzing the results of the experiments, it is considered that flank surface quality of PCD cutting tool directly influences machined surface quality, but has few effects on cutting tool's life.
通过对切削试验结果的分析，认为PCD刀具后刀面刃磨质量直接影响切削表面质量，而对PC D刀具寿命的影响则相对较小。
To improve a tool life in this case, therefore, the flank notch wear must be depressed to generate.
为了提高刀具耐用度，就必须减小后刀面边界磨损。
The space tool radius offset G instructions with the developed approach will avoid NC codes regeneration due to tool wear or tool change during the three-axis NC flank milling process.
基于该算法的空间刀具半径补偿G指令将可避免由于刀具磨损和刀具更换导致的三轴侧铣数控代码重生成。
The machining error caused by the flank wear of cutting tool in milling processes is analyzed, and a mathematic model about machining errors was proposed based on the flank wear of cutting tool.
对铣削加工过程中后刀面磨损对加工精度的影响进行了分析和研究，建立了基于刀具后刀面磨损的铣削加工误差的数学模型。
The influences of flank surface and edge quality of PCD cutting tool on cutting surface quality when machining nonferrous metal are studied in this paper.
本文主要研究PCD刀具加工有色金属时刃口及后刀面的刃磨质量对切削表面质量的影响。
This was due to the increase in the contact area at the tool-chip and tool-work interface due to the presence of flank and crater wear.
这是由于增加了接触面的工具，芯片和工具的工作界面因侧翼和火山口的磨损。
In the part coordinate system, the function of the auto-program tool (APT) cutter flank is constructed, and the point set close to the cutter-flank is selected based on the critical position.
在零件坐标系统，该函数的自动编程工具(apt)的切割器侧翼构成，并且被选择的点集接近切刀侧翼的基础上的关键位置。
In order to enhance surface quality, therefore, optimum cutting data, tool wear, surface roughness of flank faces of tools a…
为提高加工表面质置，必须优选切削参数，重视刀具磨损、后刀面粗糙度及工件材料组织的缺陷。
Meanwhile after a research on formation process of cutting surface, it is considered that flank surface quality of PCD cutting tool is the most important factor.
同时对加工工件表面的形成过程进行了分析，认为PCD刀具的后刀面表面质量是最重要的影响因素。
The maximum tool effective stress is located in the flank face near cutting edge and the shear deformation zone on the workpiece.
最大刀具等效应力出现在前刀面上切削刃的周围，工件上最大等效应力出现在第一变形区。
The equation groups can be used to generate tool paths for manufacturing rake and flank faces of the tools.
针对数控磨削的特点 ，提出了基于约束条件和成形过程的加工特种回转面刀具前、后刀面的刀位轨迹生成条件方程组。
The equation groups can be used to generate tool paths for manufacturing rake and flank faces of the tools.
针对数控磨削的特点 ，提出了基于约束条件和成形过程的加工特种回转面刀具前、后刀面的刀位轨迹生成条件方程组。
应用推荐