Objective To evaluate the corrosion behavior of Gold alloy, Titanium alloy, Ni-Cr alloy and ti implant abutment in vitro.
目的评价金合金、钛合金、镍铬合金和钛种植体基台在体外的腐蚀性能。
Ti -containing imidazoline model compound was prepared by reacting o-phenylene diamine with titanium tetrachloride. The compound was identified by elemental analysis, IR and MS.
苯二胺与四氯化钛反应合成聚合物的模型化合物钛杂咪唑啉。该化合物经元素分析、红外光谱、质谱测试。
The tanning performance of Ti compound and its application in leather tanning were summarized. The application prospect of the organic titanium in leather industry was put forward.
综述了钛配合物的鞣制性能及鞣革应用进展，提出了有机钛配合物在制革工业中应用的前景。
The result showed that the minimum titanium to form TiC and Ti(C, N) is lower than that of previously calculated.
结果表明在碳饱和铁浴内生成碳化钛和氮化钛的最低钛含量较采用现行热力学数据计算的结果要低。
AIM To study the tarnish induced by Porphyromonas gingivalis 381 on implant denture surface of titanium and ti 75 alloy.
目的研究牙龈卟啉菌381对纯钛及钛75合金种植体表面失泽腐蚀。
The results show that the corrosion potential of the Ti coating sprayed in vacuum is much higher than one of the Ti coatings sprayed in air and in argon, but a little lower than one of pure titanium.
在真空中喷涂的钛涂层基本上没有氧化物和氮化物，其衍射图谱与纯钛十分接近；
The result showed that the minimum titanium to form TiC and Ti(C, N) is lower than that of previously calculated. It was found that crystals of Ti(C, N) are formed and preferably aggl…
结果表明在碳饱和铁浴内生成碳化钛和氮化钛的最低钛含量较采用现行热力学数据计算的结果要低。
The microstructure of titanium carbides of. Ti-bearing steel has been investigated using...
利用穿隧式电子显微镜观察碳化钛析出物在。含钛钢中之微结构。
A new kind of boron nitride based shell mold used for investment casting titanium alloys was fabricated and the reaction between it and Ti-Ni alloy was investigated.
研究了一种新型钛合金精密铸造用型壳——氮化硼基复合型壳及其与钛镍合金的界面反应和反应层的形成机制。
Novel Ti-doped silica gel adsorptive materials were prepared by treating ceramic fiber paper with the sequential impregnation of water glass and the aqueous solution of acidic titanium salt.
以陶瓷纤维纸为基材，依次经水玻璃、酸性钛盐溶液浸渍制得新型钛掺杂硅胶吸附材料。
Experimental investigation of peculiarities of electroslag remelting of waste titanium chip to produce high-Ti ferro-titanium has been performed.
在有衬电渣炉内，对采用废钛屑为原料生产高品位钛铁合金的工艺进行了试验研究。
Novel Ti-doped silica gel adsorptive materials were prepared by treating ceramic fiber paper with the sequential impregnation of water glass and the aqueous solution of acidic titanium salt.
以陶瓷纤维纸为基材，顺次经水玻璃、酸性硫酸氧钛溶液浸渍共沉淀制得新型蜂窝状陶瓷基钛掺杂硅胶块体吸附剂。
When the new muscle fibrous ring wrapped in these "Ti-bone" when they began to titanium bone sustains the body's normal activity!
当新的肌肉纤维环包在这些“钛骨”上时，这些钛骨就开始维系着人体的正常活动！
Titanium anodes with different metal oxide coatings are Ti-based metal coated oxide electrode, DSA for short.
金属氧化物涂层钛阳极是指在以钛为阳极的基体表面涂上金属氧化物的电极，简称DSA。
Methods The titanium porous surfaced implant was made by plasma spray with ti powder. It's ti coated porous surfaced was observed analysed and tested.
方法选用等离子喷涂方法，将纯钛粉喷涂到纯钛桩表面，形成表面多孔种植体，并对涂层成份进行分析，力学测试粘接强度及扫描电镜观察表面形态。
Therefore, it is necessary to study the application of vanadium-titanium vermicular cast iron in ingot mould, glass mold, auto brake drum and brake disc using abundant V-Ti iron in China.
因此，利用我国丰富的钒钛生铁资源，开展钒钛蠕墨铸铁在钢锭模、玻璃模具以及汽车刹车鼓和列车制动盘等方面的应用研究很有必要。
So we have some conclusion that the vanadium and titanium take effect in the v-ti smil-steel roller with separate out strengthening. it can be evidence improving roller's organizing and using.
为此，本文得出如下结论：v、ti在半钢轧辊中起到了析出强化的作用，可以明显改善轧辊组织性能及其综合使用性能。
So we have some conclusion that the vanadium and titanium take effect in the v-ti smil-steel roller with separate out strengthening. it can be evidence improving roller's organizing and using.
为此，本文得出如下结论：v、ti在半钢轧辊中起到了析出强化的作用，可以明显改善轧辊组织性能及其综合使用性能。
应用推荐