The main kinds of the nappes are sheet thrust, Jurassian fold nappe, wedge-shaped nappe and shearing fold-thrust structure, etc.
其主要类型有席状逆冲构造、侏罗山式褶皱推覆构造、楔状推覆构造及剪切褶皱逆冲构造等。
The middle(early Himalayan)is the main deformation, characterized by the imbricate thrust structure system, whose west zone shows thrusting from SW toward NE.
中期（喜马拉雅早期）是主变形期，西带显示由SW向NE逆冲，以叠瓦状逆冲构造系统为其特征。
The SE limb of Naligou anticline was fractured in the action of persistent regional stressing and expanded into detachment-thrust structure during Himalayan orogenic period.
喜山期持续的区域应力作用使那里沟背斜SE翼沿软弱面断裂，经递进扩展变形，最终形成逆冲推覆构造。
Thrust nappe system, extending along southeast and northwest margin of Bajiazi basin. controls the emplacement and distribution of Pb-Zn deposits, so it is metallogenic structure.
逆冲推覆构造系统沿八家子盆地东缘和北西缘分布，控制铅锌矿床的就位与分布，为成矿期构造。
The results show that the missile rotation has hardly effect on inner flow field structure of SFE, but some effects on the control thrust of attitude control motors both in magnitude and in direction.
结果表明，弹体旋转对超音速射流元件内部流场结构几乎没有影响，而对姿态控制发动机的控制推力大小和方向的影响不容忽视。
The structure of arcjet, experimental system, measurement system and the small thrust measurement system were introduced.
介绍了发动机的本体结构、实验系统、参数测量系统及小推力测量系统。
Describe the structure characteristic and working principle of pressure seal swing check valve. Material selection and thrust ring design.
阐述了自压密封旋启式止回阀的结构特点、工作原理、材料选用和止推环设计。
There exists an optimal exit area of secondary nozzle to result in a maximum thrust of rocket ejector in the light of the investigated ejector chamber structure.
在文中所研究的引射燃烧室结构条件下，存在一个最佳二次喷管出口面积，它能使引射火箭的推力达到最大。
Theoretical analysis and experiment results prove that the structure is more reliable and reverse thrust is more efficient.
通过理论分析和试验结果表明，该反向喷管的结构可靠性和反向推力效率较高。
The function of buttresses was to absorb thrust from the main body of the church, a serious threat to the structure during high winds.
支墩的功能被吸收推力从教会的主要部分，严重威胁到结构是在强风期间。
In this paper, the Micro chemical Thruster's structure was designed and loading method of propellant and test method of thrust were investigated.
该文设计了化学微推力器的结构，研究了微推力器的装药方法和推力的测试方法。
The SLIM has been widely applied in transportation for its simple-firm structure and its directly forward electromagnetic thrust.
单边直线感应电机(SLIM)因结构简单牢固，直接产生前进的电磁推力，在交通中得到广泛应用。
Structural characteristics of inversion structure, fold association style, thrust fault zone upright strata developed belt shown in great profiles were also discussed.
对剖面中反映的构造反转、褶皱组合样式、逆冲断裂带、直立地层发育带的构造特征进行了探讨。
Then, the regional structure characteristics and distribution pattern are analyzed and the importance of thrust nappe fault is emphasized especially.
然后分析区域构造特征和展布格局，特别强调逆冲推覆断裂的重要性；
Dual-closed loop structure is adopted in main thrust motor and rudder motors, and PI controller is implemented by DSP software.
对主推进电机和舵电机的控制采用了双闭环结构，PI调节器由DSP软件实现。
The structure feature and main testing results of thrust bearing with double-disk supporting babbit pads is presented in this paper.
介绍双托盘支承钨金瓦推力轴承的结构特点及其主要试验结果。
The structural style found in the basin includes imbricated thrust zone, trapdoor structure, drag fold, listric fault, rollover anticline, horst-graben structure and the like.
盆地中发育多种构造样式，主要有：叠瓦状冲断层、滚板构造、牵引褶皱、铲形正断层、滚动背斜、“垒一堑”构造等。
The suprasalt structure includes suprasalt rolling anticline, fault-bending anticline, suprasalt pop-up, thrust screened structure and salt nappe.
盐上构造包括盐上滚动背斜、断弯-断展背斜、背冲断块、逆冲断层遮挡构造和盐推覆构造等；
Trap door structure, pop up structure, and assemblage of listric thrust, dragged anticline and dragged syncline are most favorable to the accumulation of oil and gas.
滚板构造、冲起构造和铲形逆断层与牵引背斜、牵引向斜组合对油气的聚集最为有利。
A through tied-arch bridge is a type of built-up arch structure, characterized by the horizontal thrust of arch end being balanced by its ties.
下承式系杆拱桥以系杆承受水平推力，属于无推力的组合体系拱结构。
Roller type thrust bearing can give simple design structure and easy to maintain and lower requirement of it's lubrication condition, but give shorter using life comparatively.
球面辊子推力轴承结构简单，对环境要求相对比较低，但寿命较短。
The imbricate fan of thrusts and soft layer are main structure features distinguishing thrust-nappe structure in magma-tic body area.
野外判定岩浆岩地区逆冲推覆构造的主要标志是逆冲叠瓦扇和软弱滑动层的存在。
The geochemical gold anomaly areas in south side of the two thrust nappe structure belts are key prospecting for further ore exploration.
金成矿受地层岩性、构造等因素的控制，在金矿床上均有化探金异常。
A new gas-magnetic dynamic pressure thrust bearing which has a compact structure, large carrying capacity and wide application prospect is proposed in the paper.
本文提出了一种结构紧凑、承载能力大、应用前景广的新型气磁复合动压止推轴承。
The thrust lock moves freely, and has the advantages of less parts, simple structure, convenient use, simple processing technology, low cost, etc.
该推力锁具有运动自如，零件数量较少，结构简单，使用方便，加工工艺简单，成本较低等优点。
The structural system of nappe consists of several overthrust fracture belts, thrust sheets and thrust slices, and master fault and secondary fault form an imbricate structure.
推覆构造体系是由几条逆冲断裂带及其逆冲席、逆冲片组成，主干断层与次级断层组成叠瓦式构造。
A new calculation method was proposed for the typical structure of the platelet transpiration flux in the rocket thrust chamber based on the test data of another chamber.
针对典型的层板发汗冷却结构，提出了利用一个推力室的实验数据来计算另一推力室所需发汗流强的方法。
This paper considers that Aerjin Mountain strike-slip fault structure is a huge tectonic zone with the property of left active anticlockwise and thrust nappes and ductile shear zone.
该文认为，阿尔金山走滑断裂构造是一巨型左行左列走滑断裂兼逆冲推覆和韧性剪切性质的断裂构造带。
The tear fault intersected with low angle normal fault or thrust fault can form some traps, e. g. trap-door structure trap.
撕裂断层与低角度正断层或逆冲断层相交时常形成有利圈闭，如活板构造等。
The tear fault intersected with low angle normal fault or thrust fault can form some traps, e. g. trap-door structure trap.
撕裂断层与低角度正断层或逆冲断层相交时常形成有利圈闭，如活板构造等。
应用推荐