This method has the advantages of low complexity and good performance through simulation and analysis.
这种方法具有实现复杂度低和性能优越等优点。
The pilot's skills are tested through simulation.
飞行员的技术是通过模拟飞行来检测的。
In the exhibition was also the scene of bacteria through simulation.
在展会现场还进行了细菌穿透模拟实验。
Finally, through simulation experiment, the result of study was validated.
通过模拟实验对研究结果进行验证。
The design of heat emission can be carried out through simulation of equipment temperature field.
因而可以通过对设备温度场的模拟，对其进行散热设计。
This paper studied on the fuel system performance of diesel engine under different diesel temperature through simulation and experiment.
通过模拟计算和试验研究相结合的方式研究了柴油温度对燃油系统性能的影响。
The effectiveness of the method is demonstrated through simulation of two flexible-link and flexible-joint 3R robots manipulating a rigid load.
文中就两个具有柔性关节和柔性臂的3R机器人协调操作刚性负载为例，验证了本方法的有效性。
The radial load which is hard to measure is obtained through simulation in practice, and a new method to shorten the roller mould design period is…
将有限元数值模拟方法引入异型棒线材的辊模拉拔中，为缩短辊模设计周期提供了新的方法。
Relationship between constant of electric resistance and structure parameter in rare earth electrolysis cell was studied through simulation experiment.
通过模拟实验研究了稀土电解槽的电阻常数与其结构参数之间的关系。
Finally through simulation of energy consumption, we analyze the difference between dynamic analysis method and the effective heat transfer coefficient method.
最后通过能耗模拟，比较了动态计算方法和有效传热系数法的差别。
Then the effects of higher-order group-velocity dispersion (GVD) on SC generation in different fibers are analyzed and contrasted in details through simulation.
介绍了SC谱的产生机理，并通过数值计算具体分析和比较了各种光纤中高阶群速度色散（GVD）对SC谱产生的影响。
In this paper, the CAN controller chip is designed by way of the top-down design, and is ensured the correctness of the design features through simulation tools.
本文采用自顶向下的设计方式对CAN控制器芯片进行设计，通过仿真工具来保证设计功能的正确性。
The weak part of the driving train is found out by analyzing the influence of each stiffness part in the driving chain on the synthesis stiffness through simulation.
通过仿真计算分析了中间传动链各个刚度环节对工作台综合刚度的贡献量，找出了传动链的刚度薄弱环节。
Finally, the law that random Gaussian white noise influencing synthesized images is found through simulation examples based on the noise influence evaluation function.
最后，以该函数为基础，通过计算机仿真实验，找到了合成图像受随机高斯白噪声影响的规律。
The kinematical model for coordinating manipulators is constructed and research is done through simulation examples for two coordinating manipulators holding one object.
建立了冗余度机械臂协调操作的数学模型，利用该模型对两机器人抓持同一刚性物体进行了仿真研究。
The research on an algorithm based on the data fusing technique for multiple targets location and tracking is given. A satisfactory result is obtained through simulation.
针对多目标跟踪问题，提出了一种基于数据融合技术实现多目标定位、确定航迹的算法。经仿真实验，使用该算法可获得较为满意的效果。
The nonlinear spring-mass-dashpot system was used as the research object. The relation between system health monitoring data and health index was given through simulation.
以非线性弹簧-阻尼-质量块系统为研究对象，通过仿真计算，给出了系统健康监测数据与系统健康指数的对应关系。
Finally, the performance of jamming suppression methods is compared through simulation, and the computational load of jamming and clutter suppression methods is presented.
最后，通过仿真实验比较了各种抗压制性噪声干扰方法的干扰抑制性能，并给出了两种典型抗压制性噪声干扰方法的运算量。
In this paper, the applications of cascade STS-SVM multilevel converters on active power filter and ac motor vector-controlled transducer are researched through simulation.
本文通过仿真研究了级联型STS - SVM多电平变流器在电力有源滤波器和交流电机矢量控制变频调速系统中的应用问题。
Stress distribution and moving characteristics are obtained through simulation when the wheel contacts with sand. The validity of simulation model is verified by experiments.
通过仿真得到车轮与沙土颗粒接触时的应力分布关系，以及运动特性关系，并通过实验验证仿真模型的正确性。
After building the equations of tooth surfaces and the meshing model of a spherical gear pair, tooth contact analysis of spherical gear pairs is performed through simulation.
在建立了球齿轮齿廓曲面方程和啮合模型基础上，利用计算机仿真的方法对其进行了齿面接触分析研究。
In this paper, the optimal regulator of an electro-hydraulic servo system is designed by using the quadratic theory, and the optimal regulating is realized through simulation.
文中应用二次型理论对一实际的电液伺服系统进行了最优调节器的设计，并通过仿真实现了系统的最优调节。
After analyzing and comparing some path search algorithms, the paper ultimately adopted a simple single threshold algorithm and attained optimal parameters through simulation.
本文分析、比较了现有的几种路径搜索算法，最后采用一种比较简单的单门限算法，并通过仿真得到参数最优值。
Convergence of combination evaluation is studied through simulation experiment to resolve inconsistency among the evaluation conclusions drawn by different evaluation methods.
通过计算机模拟实验对组合评价结论的收敛性进行研究，以便解决多方法评价结论非一致性问题。
According to theoretical analysis, a control strategy combining PID-feedback control with digital-compensation was proposed and its performance was analyzed through simulation.
在理论分析的基础上制定了PID反馈控制和数字补偿相结合的控制策略，并对该控制系统的动、稳态特性进行了仿真分析。
Current distribution in three-phase cylindrical buses is calculated through simulation current method and magnetic field surrounding the buses can be calculated too after that.
为了研究建筑物配电房母线产生的工频磁场，根据配电房大电流母线集肤效应显著的特点，提出了采用模拟电流法对三相母线的矢量磁位进行计算。
Comparativ analysis of the spectra is given with different collision frequency, electric field intensity and ratio of collision frequency to cyclotron frequency through simulation.
仿真实验对比分析了不同碰撞频率、电场强度以及不同碰撞频率与回旋频率比值下的功率谱。
Parameters, such as smoke filtration velocity, filtration medium thickness and rinsing fluid with respect to quantity and concentration, are to be determined through simulation tests.
通过模拟试验给出了过滤风速、滤料厚度、喷液量和洗涤液浓度的合理范围，对过滤-洗涤式净化设备的研制与设计具有指导意义。
Parameters, such as smoke filtration velocity, filtration medium thickness and rinsing fluid with respect to quantity and concentration, are to be determined through simulation tests.
通过模拟试验给出了过滤风速、滤料厚度、喷液量和洗涤液浓度的合理范围，对过滤-洗涤式净化设备的研制与设计具有指导意义。
应用推荐