The kinetic high-temperature reaction process in the combustion front was analyzed through quenching of combustion front.
结合燃烧前沿激冷淬熄法，分析了其燃烧前沿高温动态反应过程。
The appearance of the medium-frequency through quenching and the corresponding quenching machine has a great significance to improve the technology of heat treatment in china.
中频穿透淬火工艺及相应的淬火机床的问世，对改善和提高我国的热处理工艺和设备水平有一定意义。
The harm of mineral oil based quenching oil to environment can be weakened through hydrogenation, improvement on addition component, and regeneration of wasted oil.
通过加氢处理、改进添加剂配方及废油再生可以减少矿物油基淬火油对环镜的危害。
Through the results and analysis, we can discover that utilizing heat transfer theory and computer technology to simulate magnetic field quenching process is feasible.
分析结果表明，运用热传导理论和计算机技术来模拟外加磁场淬火过程在理论上是可行的。
Through the microstructure analysis and residual stress measurement on a quenching test-piece, the feasibility of the numerical simulation is proved.
通过对淬火试件进行金相组织分析和残余应力测量，验证了数值模拟的可行性。
Progression of the quenching and control-cooling equipment technology of plate is discussed in the paper through the mechanism study on enhancing cooling, plate shape controlling and etc.
本文通过冷却强化、板形控制等机理研究，论述中厚板淬火控冷装备技术的进展。
The rolling contact components are, as a rule, through-hardened by swiftly quenching the heated components in oil baths or salt baths.
在滚动接触组成部分，作为一项规则，通过硬的快速淬火油或盐温泉浴的加热元件。
The experimental results show that the fluorescence quenching of BSA by theophylline is due to the formation of theophylline-BSA complex through both static quenching and nonradiative energy transfer.
实验结果表明，茶碱与BSA形成基态复合物导致BSA内源荧光猝灭，猝灭机理主要为静态猝灭和非辐射能量转移。
Through reasonable manner of carburization, alignment approach with fixture and quenching method, the quality of bearings could be guaranteed.
采用合理的渗碳方式、模具矫正方法、淬火等，保证轴承质量。
These precipitation-hardened aluminum alloys gain their high strengths through heat treatment involving a severe quenching operation, which introduces a very high level of residual stresses.
航空铝合金为了获得高强韧性，必须进行固溶与时效处理，在淬火过程中产生很大的淬火残余应力。
The sensibility of the harden structure of high carbon steel to hydrogen and stress is researched through the tensile test of quenched specimens and charging hydrogen specimens after quenching.
利用高碳钢淬火试样及淬火后充氢试样的拉伸试验，研究了高碳钢淬硬组织对氢和应力的敏感性。
The influences of coke dry quenching and coke water quenching on coke strength are compared and analyzed through determining the coke strength and water content.
通过测定焦炭强度和水分，对干法熄焦和湿法熄焦对焦炭质量的影响进行了对比分析。
The influence of cooling characteristics of the quenching cooling medium on the properties and dimensions of the gears was discussed through analyzing the quenching process.
通过两种用于齿轮淬火冷却的淬火介质的对比实验分析，讨论了淬火介质的冷却特性对齿轮性能和尺寸变化的影响。
It was shown that herbicide had a strong ability to quench the CAT fluorescence mainly through a static quenching procedure.
结果表明，除草剂对过氧化氢酶的荧光有较强的猝灭作用，且静态猝灭是引起荧光猝灭的主要原因。
In light of the problems occurred in manufacturing the high-pressure pipeline unions, the authors propose to treat the union by direct quenching through the use of the residual heat of forging.
针对石油钻采高压管线连接活接头生产中的问题，提出利用锻造余热直接淬火的形变热处理工艺。
Main controller adopted RS232 to communicate with robot controller through I/O regulate plasma quenching welder.
主控机通过I/O控制等离子焊机，采用RS232与机器人控制器通讯。
The structure of nozzle and distribution state of coke in quenching car are discussed. Meanwhile, the coking quality is improved through using large-flow nozzles device.
探讨了喷嘴的结构，焦炭在熄焦车内的分布情况，采用大流量喷嘴装置，改善了焦炭的质量。
To make quenching and control cooling equipment of plate achieve optimum cooling performance, it is necessary to ensure the impinging jet able to penetrate through the water layer deposited on plate.
要使中厚板淬火控冷装置获得最佳的冷却能力，必须要保证冲击射流可以穿透钢板表面的滞留水层。
The model parameters were calculated through the nonlinear regression algorithm. Thus, the formula of heat transfer coefficient for the quenching process was obtained.
通过非线性回归算法对模型参数进行回归计算，最终取得整个淬火过程的换热系数公式。
The ferrite is obtained first through annealing, then biphase structure of ferrite and bainite is obtained through isothermal quenching.
其经预先退火得到全部铁素体组织，然后等温淬火得到铁素体和贝氏体双相组织的基体。
It is produced by precipitation through filtering, heating and quenching works.
它被生产附近的的降水通的滤波器，热和解渴工作。
Energy saving and environmental protection can be achieved simultaneously through the coke dry quenching technology (CDQ) that employs the recirculating inertial gas to cool off the coke.
干熄焦工艺具有节能和环保双重效益，其基本原理是利用循环惰性气体冷却焦炭。
Heating and through heating apply to forging, rolling, bending and metal surface quenching.
保温炉节能适用于不锈钢、精密铸造、铸钢、生铁、铜、铝、银焊条、汝铁硼等金属材料熔炼。
Heating and through heating apply to forging, rolling, bending and metal surface quenching.
保温炉节能适用于不锈钢、精密铸造、铸钢、生铁、铜、铝、银焊条、汝铁硼等金属材料熔炼。
应用推荐