The agile development cycle allowed the system test team to act like a real customer, from the application design right through coding and unit testing of the system test application.
敏捷的开发周期允许系统测试团队扮演实际的客户，从应用程序设计到系统测试应用程序的编码和单元测试。
These results are represented as artifacts in the individual views as development progresses through iterative cycles of system definition, analysis, design, construction, and test.
这些结果被表现为与贯穿系统定义、分析、设计、构建和测试的迭代开发周期的开发进展一样的单独视图中的构件。
Hardware and software designs are amply introduced in the paper and through the test analysis using square wave 'the feasibility and validity of this design are affirmed.
详细地介绍了系统的硬件设计和软件设计，并在仿真的基础上通过对方波信号的试验分析，验证了系统设计的可行性和正确性。
The simulation test was completed through two mechanical design cases. The result shows that the algorithm has high efficiency, rapid speed of convergence and strong capability of global search.
最后通过对两个机械优化设计实例进行仿真试验，结果表明本算法求解效率高、收敛速度快、全局搜索能力强。
In the paper, spear lag of beam plated construction and effective distribution width of flange plate are analysed through model test and research. It provides a reference in design.
本文通过大型试验的研究，分析梁板结构截面的剪力滞效应，及翼缘板的有效分布宽度，为设计提供参考。
Some available data for the bit design and the application of bit types are obtained through the test.
通过岩石在围压下的三轴应力试验，获得了钻头使用及设计的一些有用数据。
Through the test and lectures, we expected to promote the knowledge of ichnography design and enhance students' appreciation ability and interests in it.
通过进行比赛以及配合比赛的讲座，推广平面设计知识，提升学校同学对平面艺术的鉴赏能力和对平面设计的兴趣。
These means are all based on experience and test. In the thesis, we make fireproof design through calculation.
这些方法都是建立在经验和试验的基础上的，本文提出的防火设计方法主要是通过计算来进行。
The article explained its testing principle, hardware and software design, and proved the accuracy of test data through contrast experiment of standard units and dedicated instruments.
介绍了其测试原理、硬件设计及软件设计，并通过与标准件及专用测试仪器的比对实验验证了测试数据的准确性。
Through experimental design, not only may clarify in the testing the independent variable regarding the dependent variable influence size and the tendency, but also may seek its best test condition.
通过试验设计，不仅可以弄清楚试验过程中自变量对于因变量的影响的大小和趋势，还可以寻找其最佳试验条件。
Run the test through the experiment and scene has proved that the design is feasible and well-effect.
通过实验和现场运行考验，证明了设计的可行性和良好效果。
Through the actual test, the results of the testing value and the design predicted value can tally well.
通过实际测试，结果表明与设计计算值基本吻合。
Through the road test, the data and curves prove that the test platform works stable, which fulfills the design requirement.
通过工况实验，得出实测波形及数据，实验结果证明该测试平台工作稳定，并且达到了设计要求。
This systematic design method is illustrated through computer modeling, program design, project execution, operation test, and checked it in actual working condition.
通过计算机模拟、工程设计、工程实施、运行调试再到实际工作状态的检验，详细说明了这一系统化设计方法。
Making use of logic analyzer, oscillograph and bus analyzer, we can design and test the superhigh density FPGA, and transmit the signal to the instrument through probe and linker.
设计和验证超高密度FPGA的方法是采用逻辑分析仪、示波器和总线分析仪，通过测试头和连接器把信号送到仪器上。
According to the transition plan, design test programs and test cases, through analyzing test results in the actual network environment, can be obtained the conclusion of kinds of tunnel technology.
根据过渡方案，设计测试方案以及测试用例，通过分析测试的结果，能得出每一种隧道技术在实际网络环境中互通情况的结论。
Through test and analysis of working stress on balance beam and lengthwise beam of dozer frame, a strength design method and the basis for compiling load spectrum are given in the paper.
通过对推土机平衡梁和车架纵梁的工作应力测定与分析，掌握了推土机的强度设计方法，为编制载荷谱打下基础。
This design will be through a multi-output DC power supply regulator circuit is designed to explain the principle and regulator of the power indicator and test methods.
本设计将通过多路输出直流稳压电源是设计说明稳压电路的工作原理和稳压的电源的指标及其测试方式。
Through analyzing the orthogonal test and incorporating it with the software testing theory, this paper puts forward an orthogonal method to design test cases.
文章对正交试验进行了分析，并将其与软件测试理论相结合，提出了测试用例的正交设计方法。
Through asphalt mixture interior test, discussed the controlling of fiber asphalt mixture design index, and the matching ratio design method necessarily.
通过沥青混合料室内试验研究，对纤维沥青混合料设计指标的控制和配合比设计方法进行了必要地探讨。
Through actual manufacture and laboratory debugging, this system now has passed the enterprise 's preliminary test approval and each target has achieved the design request and the movement was good.
本系统通过实际制作，实验室调试，目前已通过委托企业的初步测试验收，各项指标都能达到设计要求，运行良好。
A digital electronic controller was manufactured, the control software design was accomplished, and the control system hardware-in-the-loop simulation test was carried through.
制造的数字电子控制器，控制软件设计完成，并控制系统的硬件在环仿真试验进行通过。
Structural design method of unbound aggregate upper base is analyzed through field test, laboratory test and theory study.
并从室内试验和理论分析两方面对级配碎石基层结构设计方法进行研究。
Comprehensive project management includes a project engineer that takes responsibility for the project from application, through design, manufacture, test and start-up.
全面的项目管理包括项目工程师负责通过该项目，需要从应用程序设计，制造，测试和启动。
Finally, the research results are used for the design and implementation of the personalized search engine system, and the above-mentioned methods are proved to be effective through the system test.
最后，本文将上述研究成果应用于个性化搜索引擎系统的设计与实现，通过系统测试证明了上述方法的有效性。
Through molecular structure design and material selection formula and the development process of orthogonal test of a new generation of KH high efficiency foaming agent.
通过分子结构设计和材料优选配方与工艺正交试验研制的新一代KH高效发泡剂。
Through test and actual operation, both of the functions and technical specifications meet the design requirements.
通过测试和实际运行，功能和技术指标均满足设计要求。
Through the several approaches such as redundant design, radiation-hardened design, or screening and test, COTS components can be used to meet the requirements of high performance for spacecraft.
阐述了空间飞行器采用抗辐射加固器件的优点和存在的问题，探讨了采用高性能商用器件的几种途径，抗辐射加固、冗余设计、筛选测试，以及存在的问题和面临的风险；
This paper introduces a new design method and its achievement through hardware and software of the carrier free pulse radar test system.
本文提出了无载波脉冲雷达测试系统新的设计方法及其硬件和软件的实现。
Through comparing test results with design values of the unit, this paper try to find the difference among them and try to give reactor operation information on handling the accident.
通过实验结果与设计分析计算结果的比较，找出异同，为此类事故处理提供指导。
应用推荐