The effectiveness of such connection can be reduced through corrosion of the reinforcing steel.
而钢筋的腐蚀 （锈蚀 ）则会降低它与混凝土之间的结合效果。
Through corrosion analysis mechanisms of bottom edge board of crude oil tanks in GPC wharf Mabianzhou island Huizhou, bring up corresponding the protection measures.
对马鞭洲岛广石化码头原油罐罐底边缘板腐蚀机理进行分析，并采取相应的防护措施。
Through-thickness cracking also can lead to fatigue or stress corrosion cracking of the base metal beneath the plating.
还会形成穿透型裂纹，造成镀层下本体金属的疲劳或应力腐蚀裂纹。
Soft PVC cemented with epoxy adhesives was used as the inside lining of the metal plate and its anti-corrosion performance was analyzed through the electrochemistry impedance test in this article.
利用环氧树脂胶粘剂粘结软质聚氯乙烯作为金属板材的内衬，通过电化学阻抗测试分析了聚氯乙烯内衬耐酸耐碱性能。
At least one source of the corrosion is the small amount of outgassing through the battery vents that takes place when the battery is in use.
蓄电池在使用过程中会产生一些通过蓄电池的通气孔排出的腐蚀性气体，这些气体是导致上述腐蚀现象的原因之一。
Through the discussion on the mechanism and effect factors of the stress corrosion cracking by sulfides, this paper expounds its harmfulness and proposes some measures to control it.
本文通过对硫化物应力腐蚀开裂的机理和影响因素的讨论，说明其危害性并提出了控制方法。
An overall chromium coating improves the corrosion resistance of the generally used through-hardening rolling bearing steel.
一个总铬涂层提高了耐腐蚀性能的普遍使用，通过硬化滚动轴承钢。
Through a number of statistical data analysis and further research to the failure gearing, the main problem in the usage of aero-bearing was corrosion and wear.
通过大量数据统计分析和失效轴承进一步研究，发现航空轴承使用中存在的主要问题是腐蚀和磨损。
Through appearance inspection, wall thickness measurement, EDS analysis and X-ray diffraction, the corrosion cause of the coal economizer tube is analysed.
通过外观检验、壁厚测量、扫描电镜、能谱和X射线衍射，对省煤器管腐蚀原因进行了分析。
Through the tests of mechanical properties of charging hydrogen and the corrosion tests in loop water of high temperature and high pressure, hydrogen brittleness of T225NG Ti-alloy was studied.
通过渗氢试样的常温力学性能试验和双悬臂梁试样在高温高压高纯水中的腐蚀试验来研究t 225ng钛合金的氢脆行为。
Through permeability resistance test, sulfate corrosion test and abrasion resistance test, the relationship of construction techniques, concrete surface quality and durability was reached.
通过混凝土抗渗性试验、抗硫酸盐腐蚀试验和耐磨性试验，得出施工工艺和混凝土表面质量与混凝土耐久性的关系。
Through analysis and tests, the authors selected corrosion resistant nitrogen case-hardening process to replace chrome plating.
通过分析和试验，我们采用了抗蚀渗氮取代电镀铬工艺。
The antirust and dehydration properties of the normal temperature dehydrating antirust oil were investigated through experiments of corrosion and water displacement.
通过腐蚀实验和水置换性试验，研究了常温脱水性防锈油的防锈性能和脱水性。
Through the study and riddling the advanced prescription, the problems of corrosion, scale and biological fouling about tertiary treated wastewater reuse in cooling water system had been resolved.
通过研制和筛选高性能的水处理药剂，以解决中水回用于循环水所引起的腐蚀、结垢、微生物问题。
The corrosion regularity of passivator solution on metal and slag on refractory material in BF hearth is studied through experiments.
通过实验，研究了钝化剂水溶液对金属的腐蚀规律以及炉渣对高炉炉缸耐火材料的侵蚀规律。
Through the AC test, the permeability of concrete and the steel corrosion rate of the carbonated concrete samples were studied.
采用交流电方法研究了混凝土的渗透性，同时还测定了碳化后混凝土中的钢筋锈蚀量。
The pit then grows through the compressive layer, and the change in residual stress state and the pit geometry initiate stress corrosion cracking.
随后斑点穿过压缩层继续扩展，剩余应力发生改变，斑点最终导致应力腐蚀裂纹。
The optimum electrolytic corrosion process has been selected through observations.
通过观察比较，找出了最佳电解腐蚀工艺。
Feasibility and process are discussed in severe corrosion environment; and availability of such kind of inspection on chemical equipment is discussed through primary analysis of its economics.
讨论在强腐蚀环境中使用不锈钢衬里的可行性及工艺，通过对其经济性的初步分析，探讨此类检修方法对化工设备检修中的实用性。
The critical aspects in the corrosion protection engineering were determined through the analysis of corrosion mechanisms and comparison of corrosion protection methods.
通过对管道腐蚀机理的分析和防护方法的比较，确定了上述地区长输管道腐蚀防护设计的要点。
The corrosion causes of the catalysis and desulfurization system for heavy oil were analysed through the performance comparison between MDEA and DIPA, and some countermeasures were proposed.
通过对MDEA和DIPA两种脱硫溶液性质的对比，分析了重油催化脱硫系统腐蚀的原因，并提出了几种防腐蚀的对策。
The program of improving the mixing form was proposed through the corrosion analysis of the head at the bottom of esterification reactors.
通过对酯化反应釜底封头腐蚀问题的分析，提出改进搅拌方式的解决方案。
It has been proved that these cracks are caused by sulfide stress corrosion cracking (SSCC) through failure analysis and service environment survey.
通过失效分析和管道服役环境调查，证明开裂原因是管道服役期间发生硫化物应力腐蚀开裂(SSCC)。
Through a review of actual inspection cases the cause of external corrosion of thermal insulated pressure vessels is analyzed and some methods and measures for corrosion prevention are presented.
通过检验案例介绍，分析了带保温压力容器产生外腐蚀的原因，并提出解决方法及预防措施。
Research on mechanism of serious corrosion of furnace lining is conducted; Baiyin furnace life is prolonged through optimized arrangement of refractory material.
对白银炉炉衬蚀损较严重部位的蚀损机理进行了研究，通过采用耐火材料优化配置技术，提高了白银炉寿命。
The atmospheric corrosion of steels in polluted environment was studied through atmospheric exposure test and the corrosion products were analyzed by SEM and XRD.
通过大气暴露试验，并结合对腐蚀产物形貌和组成的观察和分析，研究了碳钢和低合金钢在污染环境中的大气腐蚀规律。
Through the analysis of corrosion forms of carbon steel water cooler in the fertilizer plant of Urumqi General Petrochemical Works, the various factors leading to corrosion were described.
通过对乌鲁木齐石化总厂化肥厂碳钢水冷却器的腐蚀形态分析，阐述了发生腐蚀的诸多因素。
The involved corrosion process was studied through electrochemical measurements.
采用电化学方法研究了镀锌金具的腐蚀过程。
Corrosion resistance and mechanisms of these alloys were researched through erosion, electrochemical corrosion and high temperature oxidation.
针对所制试样，从浸蚀、电化学腐蚀和高温氧化三个方面进行耐蚀性能及其机理的研究。
Corrosion resistance and mechanisms of these alloys were researched through erosion, electrochemical corrosion and high temperature oxidation.
针对所制试样，从浸蚀、电化学腐蚀和高温氧化三个方面进行耐蚀性能及其机理的研究。
应用推荐