The whole ship slab under the thermal load is analyzed using the three dimensional finite element.
对温度荷载作用下整体滑动板块进行了三维有限元分析。
Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).
用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。
The automatic mesh generating principle and its algorithm are obtained successfully for some representive three dimensional finite element problems.
成功地获得了一些具有应用代表性的三维板壳和块体结构有限元计算网格的自动划分原理和算法。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
Based on three dimensional finite element analyses of magnetic fields, the cogging torque of a prototype motor is calculated using the virtual work and Maxwell stress tensor methods.
在电机内磁场三维有限元数值分析的基础上，采用虚位移和麦克斯韦张量两种不同的方法计算了电机的脉动转矩。
The load analysis and calculation under wave action of this platform is developed, on this base, a three dimensional finite element strength analysis for main structural body is conducted.
展开了对该平台在波浪作用下载荷的分析计算，在此基础上对主体结构进行了三维有限元强度分析。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
Objective a three dimensional finite element model after total hip replacement was established to analytically study the stress distribution of the artificial stem, bone cement and human femur.
目的建立人工髋关节置换术后的三维有限元模型，分析研究人工股骨柄、骨水泥和人体股骨的应力分布。
Conclusion Three dimensional finite element analysis is a kind of convenient and practicable method to be used as the confirmation and supplement of experimental biomechanics study of human being.
结论三维有限元分析方法是一种简便实用的生物力学研究方法，可作为实验生物力学研究的验证和补充方法。
Methods A three-dimensional finite element model of maxilla containing palatal implant was built using spiral CT scanning, computer image processing, and CAD technology.
方法采用螺旋CT扫描、计算机图像处理及CAD技术，建立含腭部种植体的上颌骨三维有限元模型。
The response of dual laterolog in tilted anisotropic sedimentary formation was simulated with the three-dimensional finite element method.
利用三维有限元法，模拟了电性各向异性倾斜沉积岩层的双侧向测井响应。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
The tank structure of mining flameproof transformer is analyzed by the three-dimensional finite element method. The optimal design of tank has been carried out.
采用三维有限元法对矿用隔爆型变压器箱体结构进行了分析，完成了箱体结构的优化设计。
Three-dimensional finite element analysis of the stress of the mandible premolar under loading on its traumatic occlusal spots.
下颌前磨牙创伤咬合点加载的三维有限元应力分析。
This paper analyzes the local stress in the anchorage zone of cable-beam and cable-tower with three-dimensional finite element model for providing the reference to similar works.
本文建立索梁及索塔锚固的三维有限元模型，分析这些部位的局部应力。
Methods Spiral ct scanning, image processing and CAD technology and FEM software were employed in the study to construct the three-dimensional finite element model of maxilla with a palatal implant.
方法采用螺旋ct断层扫描、计算机图像处理、计算机辅助设计和有限元软件处理，建立含腭部种植体的上颌骨三维有限元模型。
The subsidence of foundation and stability of fill slope are analyzed by means of three-dimensional finite element and Relative Suggestions are put forward for the project construction.
本文利用三维有限元法对地基沉降、填方边坡稳定性等问题进行了分析，对工程施工提出了相应的建议。
This paper applies the three-dimensional finite element method to the analysis of the stress for steam expanding vessel with tangential pipe, and the stress distribution has been obtained.
采用三维有限元方法对蒸汽扩容器与切向接管联接的关键部位进行了应力分析，获得了该部位的应力分布。
Objective: To establish a three-dimensional finite element model of normal human hip as a foundation of finite element analysis in this area.
目的：构建正常人体髋关节的三维有限元模型，作为该部位进一步有限元分析的基础。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
METHODS: Three-dimensional finite element method was used to analyze the initial stress around screw implant of different elastic modulus and different diameter.
方法：用三维有限元的方法对不同弹性模量和不同直径种植体植入后骨界面的初始应力进行分析。
Three-dimensional finite element analysis of the TMJ and the mandible under orthopedic chincup forces.
颏兜力作用下颞下颌关节及下颌骨受力的三维有限元分析。
The three-dimensional finite element method was used to solve some key problems in the design of the box floor in Suzhou River Estuarine Lock project.
针对苏州河河口水闸工程中的大跨度箱形底板设计中遇到的困难，利用三维有限元对底板结构进行计算分析。
Conclusion Establishment of three-dimensional finite element models of artificial lumbar intervertebral disc and analysis of its stress are feasible. The results are reliable.
结论建立人工腰椎间盘三维有限元模型并进行其应力分析是可行的，结果是可信的。
The three dimensional sensitivity distribution of an 8 electrode capacitance tomography sensor is analyzed using three-dimensional finite element method.
用电容传感器的三维有限元模型，分析了8电极电容层析成象传感器灵敏度的三维分布。
This paper adopts the three-dimensional finite element model, analyses the mechanical tendency with the variety of the thickness and modulus of the pavement structure.
采用三维有限元计算模型，分析了路面结构厚度和模量变化时的力学响应变化趋势。
OBJECTIVE: Three-dimensional finite element method was used to observe and analysis the stress conduction of artificial lumbar intervertebral disc in lumbar motion segment.
目的：通过三维有限元的方法观察分析人工腰椎间盘在腰椎运动节段中的应力传导作用。
Moreover, three-dimensional finite element model is set up to simulate the arch ring, and the measures relevant are also raised.
同时，利用空间三维有限元子域法对拱圈建立起模型，并给出相应的解决步骤。
Moreover, three-dimensional finite element model is set up to simulate the arch ring, and the measures relevant are also raised.
同时，利用空间三维有限元子域法对拱圈建立起模型，并给出相应的解决步骤。
应用推荐