Methods: Three-dimensional finite element method were used.
方法：采用三维有限元法。
The influence coefficients of the film are calculated by using the three-dimensional finite element method.
利用三维有限元方法得到基体的影响系数。
Objective: the three-dimensional finite element method models of the maxillary second molar was constructed.
目的：建立人上颌第二磨牙三维有限元模型。
OBJECTIVE: To construct a lumber spine (L3-5) biomechanical model using three-dimensional finite element method.
目的：应用三维有限元法建立L3~5腰椎活动节段力学模型。
In this paper, the natural frequencies and modes of box water body researched by using three-dimensional finite element method.
本文运用三维有限元方法离散水体，研究了箱形术体的自振频率及动水压力振型。
The paper studies distribution law of stress and strain of gate-dam under static regime with three-dimensional finite element method.
本文采用三维有限元方法，研究堰闸坝在静力状态下其应力和变位的分布规律。
The response of dual laterolog in tilted anisotropic sedimentary formation was simulated with the three-dimensional finite element method.
利用三维有限元法，模拟了电性各向异性倾斜沉积岩层的双侧向测井响应。
The three-dimensional finite element method was used to solve some key problems in the design of the box floor in Suzhou River Estuarine Lock project.
针对苏州河河口水闸工程中的大跨度箱形底板设计中遇到的困难，利用三维有限元对底板结构进行计算分析。
The three dimensional sensitivity distribution of an 8 electrode capacitance tomography sensor is analyzed using three-dimensional finite element method.
用电容传感器的三维有限元模型，分析了8电极电容层析成象传感器灵敏度的三维分布。
The tank structure of mining flameproof transformer is analyzed by the three-dimensional finite element method. The optimal design of tank has been carried out.
采用三维有限元法对矿用隔爆型变压器箱体结构进行了分析，完成了箱体结构的优化设计。
METHODS: Three-dimensional finite element method was used to analyze the initial stress around screw implant of different elastic modulus and different diameter.
方法：用三维有限元的方法对不同弹性模量和不同直径种植体植入后骨界面的初始应力进行分析。
OBJECTIVE: Three-dimensional finite element method was used to observe and analysis the stress conduction of artificial lumbar intervertebral disc in lumbar motion segment.
目的：通过三维有限元的方法观察分析人工腰椎间盘在腰椎运动节段中的应力传导作用。
A calculation of the wall temperature distribution in liquid propellant rocket engine chamber with milled grooves was completed by the aid of three-dimensional finite element method.
采用三维有限元模型对液体火箭发动机铣槽推力室进行了壁温分布计算。边界条件按一维经验公式处理。计算中比较了不同冷却剂流量。
This paper applies the three-dimensional finite element method to the analysis of the stress for steam expanding vessel with tangential pipe, and the stress distribution has been obtained.
采用三维有限元方法对蒸汽扩容器与切向接管联接的关键部位进行了应力分析，获得了该部位的应力分布。
According to the characteristics of loads on blades, a model for estimating fatigue life of blades is presented based on three-dimensional finite element method and improved local strain method.
根据汽轮机低压叶片所受载荷的特点，建立了一种基于三维有限元法和改进局部应力应变法的叶片疲劳寿命预测模型。
Conclusion Three dimensional finite element analysis is a kind of convenient and practicable method to be used as the confirmation and supplement of experimental biomechanics study of human being.
结论三维有限元分析方法是一种简便实用的生物力学研究方法，可作为实验生物力学研究的验证和补充方法。
Using finite element analysis method, three-dimensional calculation is conducted for force summing on rod in high-inclination well of Liaohe tidal zone oilfield.
应用有限元法对辽河滩海油田大斜度定向井抽油杆柱受力进行了三维计算。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
Methods: Three-dimensional anisotropic finite element method.
方法：三维各向异性有限元法。
Using a spatial composite finite element method, combining three-dimensional solid element and bar element, the mechanical analysis of a two-span curved PC continuous box girder bridge is conducted.
采用三维实体单元和杆单元相结合的空间组合有限元方法，对一座两跨曲线预应力混凝土箱形连续梁桥进行空间受力分析。
Objective To explore a fast and precise method for the establishment of three-dimensional finite element model of lumbar.
目的探索一种快速、精确的建立腰椎三维有限元模型的简便方法。
A calculating model of finite element method with three-dimensional beam element for subsurface pipeline was established.
建立了埋地输油管道三维梁单元有限元应力应变计算力学模型，并给出了求解方法。
The finite element method is used for the three-dimensional flow field calculation in designing centrifugal pump impellers.
为进行离心泵叶轮的三元设计，用有限元方法解决了离心泵叶轮三元流场的计算问题。
This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.
采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
Thermal-structural analysis was performed for ultrasonic wire bonding(UWB) by three dimensional finite element method(FEM).
用三维有限元方法对超声波线焊进行了瞬态的热-结构分析。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
The three dimensional FEM(Finite Element Method) and the submodeling technique are used to analyze the water intake of the Longtan hydropower station.
采用空间有限元以及子结构方法对龙滩水电站导流隧洞进水口结构配筋设计方案进行复核与评价。
Objective: to explore the method to construct three-dimensional finite element model for maxillary posterior-tooth area, maxillary sinus, zygoma and zygomatic implant.
目的：探讨上颌骨后牙区、上颌窦、颧骨及颧骨种植体的三维有限元建模方法。
Objective: to explore the method to construct three-dimensional finite element model for maxillary posterior-tooth area, maxillary sinus, zygoma and zygomatic implant.
目的：探讨上颌骨后牙区、上颌窦、颧骨及颧骨种植体的三维有限元建模方法。
应用推荐