The flux transformer and DC-SQUID were fabricated on same thin film substrate, avoiding the difficulty of single chip coupling alignment between flux transformer and DC-SQUID.
磁通变换器与DC—SQUID制备在同一片薄膜衬底上，避免了分立单片耦合对准的困难。
Making a flexible display as fully functional as the typical flat-panel computer screen requires layering thin-film transistors on a flexible substrate.
要制作一张具备一般平板电脑显示器所有功能的软性显示器，就必须在一个软性基板上铺设薄膜晶体管。
Reliability test of flexible substrate thin-film thermistor is researched. The reasons of failure from the testing date are found and improved advices are pointed out.
对软基底薄膜热敏电阻器的可靠试验进行了研究，由试验数据找出失效原因，并提出改进措施。
The measurement of stress change in thin film by Substrate Curvature method is introduced in this paper.
有关薄膜应力的一般测量方法存在精度不高和不能实时测量的缺点。
The particular requirement on substrate materials selecting, thin film structure design and monitor and control of thin film thickness has been discussed.
讨论了在基底材料选择、膜系设计以及膜厚监控等方面要求的特殊性，并给出了一些滤光片设计和监控的要求。
A suggestion was made to measure thin-film thicknesses using second X-ray fluorescence from substrate excited by primary X-ray of plating element, and corresponding equations were derived.
为了弥补目前采用的各种镀层厚度测量方法之不足，本文提出利用镀层元素一次X光激发的基底金属二次荧光进行膜厚测量的设想，并推导出相应的计算公式。
Ordinary widow glass is used to serve as substrate and encapsulation materials of the cadmium sulphide thin film solar cells, which is encapsulated by all-glass for terrestrial application.
用普通窗玻璃作为硫化镉薄膜太阳电池的衬底和囊封材料，制备了供地面条件下使用的全玻璃封装的太阳电池。
In this paper, we have studied a preparation and structure of ceramic silicon sheets for substrate of poly-Si thin film solar cells.
文章研究了用来作为多晶硅薄膜太阳电池衬底的陶瓷硅材料的制备方法及其结构。
In this paper, WO3 thin film was deposited on glass substrate and silicon slice by DC reactive magnetron sputtering and using metal tungsten as target.
本文采用直流反应磁控溅射工艺，以金属钨为靶材，在玻璃和单晶硅片上沉积了WO 3薄膜。
Molding pressure, Sinter temperature in advance and the velocity of temperature raised are the main factors for the matching of anode substrate and thin film YSZ electrolyte.
影响阳极基底与YSZ电解质薄膜共焙烧匹配性的主要因素是成型压力、预焙烧温度和焙烧升温速率。
Finally, we study the instability of a thin liquid film resting on a uniformly stretched soft elastomeric substrate driven by van der Waals forces by a linear analysis.
最后，我们对处于有限单向预拉伸软弹性衬底上的液体薄膜由于范德华力驱动而产生的失稳进行了线性稳定性分析。
Molding pressure, sinter temperature in advance and the raise velocity of temperature were the main influencing factors for the matching of anode substrate and thin film YSZ electrolyte.
影响阳极基底与YS Z电解质薄膜共焙烧匹配性的主要因素是成型压力、预焙烧温度和焙烧升温速率。
Possibility of decreasing the minimal measurable thickness of the film by insertion of a high index thin layer between the substrate and the film to be measured is discussed.
文中讨论了利用添加高折射率薄层减小待测薄膜的最小厚度的可能性。
Polycrystalline silicon thin film solar cell by RTCVD on SSP substrate is prepared so as to simplify the process and lower the cost.
从简化步骤、降低成本的角度出发，采用快速热化学气相沉积（RTCVD）法在低纯颗粒带硅（SSP）衬底上制备出了多晶硅薄膜太阳电池。
The present invention provides a thin film transistor substrate realizing reduced interlayer short-circuit defects in a capacitor, and a display device having the thin film transistor substrate.
本发明提供了一种薄膜晶体管衬底和具有这种薄膜晶体管衬底的显示装置，这种薄膜晶体管衬底能够减小电容器中的层间短路缺陷。
Further disclosed is a process for fabricating an organic thin-film transistor device, preferably by relative low-temperature sublimation or solution-phase deposition onto a substrate.
进一步公开了优选通过相对低温升华或溶液相沉积到基底上来制造有机薄膜晶体管器件的方法。
COF is a high performance, multichip packaging technology in which dies are encased in a molded plastic substrate and interconnects are made via a thin-film structure formed over the components.
COF是一种高性能、多芯片封装工艺技术，在此封装中把芯片包入模塑塑料基板中，通过在元器件上形成的薄膜结构构成互连。
The invention provides a flexible thin film solar cell, wherein the cell comprises the following structures: a light inlet substrate (21) which is formed from a flexible thin polymer film;
本发明提供一种柔性薄膜太阳能电池，其中包括如下结构：用柔性聚合物薄膜构成的进光面衬底（21）；
A layer of europium oxide red light luminescent thin film is deposited on one side surface of a single crystal silicon substrate.
在单晶硅衬底的一个侧面沉积有一层氧化铕红光发光薄膜。
The techniques of depositing zinc thin film on grass substrate by vacuum evaporation and direct-current sputtering were investigated with XRD, SEM and AFM in this paper.
本论文对真空蒸发法和直流溅射法沉积锌膜的工艺进行了研究，结合XRD、SEM、AFM等分析手段，以探索这两种方法在制备锌膜方面的一般规律。
Thin film transistor array substrate and its producing method are disclosed.
薄膜晶体管阵列基板及其制造方法。
Said thin-film transistor array substrate comprises a first conductive pattern group having grids of the thin-film transistor and select lines connected with the grids;
一种薄膜晶体管阵列基板，其 包括：第一导电图案组，包括薄膜晶体管的栅极和与该栅极相连的选通线；
A microwave plasma processing device and a gas supply member capable of forming a uniform thin film on a substrate to be processed.
本发明提供能够在处理基体上形成均匀的薄膜的微波等离子体处理装置和气体供给构件。
A transistor circuit for an array device comprises a plurality of thin film transistors electrically connected in parallel and provided on a common substrate.
一种用于阵列器件的晶体管电路包括并联电连接且设置在同一衬底上的多个薄膜晶体管。
The thin film is substantially deposited only in the selected areas of the substrate not having the deposition inhibitor material.
其中，该无机薄膜基本上仅沉积在没有沉积抑制剂材料的基板的选择区域中。
The invention provides a thin film transistor array substrate, a display and a manufacturing method thereof.
本发明提供一种薄膜晶体管阵列基板、显示器及其制造方法。
The preparation method comprises the following steps: 1. lanthanum and calcium modified lead titanate ferroelectric thin film is precipitated on a substrate;
制备方法：一、在基底上沉积钛酸铅镧钙系铁电薄膜；
The preparation method comprises the following steps: 1. lanthanum and calcium modified lead titanate ferroelectric thin film is precipitated on a substrate;
制备方法：一、在基底上沉积钛酸铅镧钙系铁电薄膜；
应用推荐