Combining the advantages of conventional and thin-slab-production routes, this casting process is highly flexible and well suited for casting slabs used for a wide range of applications.
通过结合传统板坯连铸和薄板坯连铸的优点，中厚板坯连铸技术具有高度的灵活性，完全适合浇铸用途广泛的板坯。
The funnel mould is one of the important equipments of the thin-slab continuous casters.
漏斗形结晶器是薄板坯连铸机的重要设备。
By using the similar principles, a physical model of thin-slab tundish with a certain scale was established in lab.
依据相似原理，在实验室建立了一定相似比的薄板坯连铸中间包物理模型。
Electromagnetic braking on flow field of molten steel in the thin-slab continuous casting mold is analyzed by mathematical modeling and experiment.
采用模型实验结合数值模拟的方法分析了薄板坯连铸结晶器的电磁制动过程。
This program was applied to calculate the temperature distribution of copper thin-slab continuous casting with different casting speeds and cooling conditions.
利用该程序计算了不同拉速及冷却条件下，铜薄板连铸过程中温度场的分布，并分析了拉速、冷却条件对铸坯温度的影响。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
The major key of this technology is to assure the good quality and the less crack of thin slab .
其技术的重要关键是保证薄板坯具有良好质量，铸坯的裂纹缺陷较少。
It showed that EMBR could control vortex and improve the flow field in the thin slab continuous casting mould effetely.
计算表明，电磁制动对于抑制涡旋、改善薄板坯连铸结晶器中的流场有明显效果。
The cleanliness of molten steel is a key factor for thin slab casting.
洁净钢的生产是薄板坯连铸的关键问题。
The vortex flow and mold flux entrapment in the thin slab continuous casting mold was investigated using a 1/4 scale water model.
利用1/4水模型对薄板坯连铸结晶器内的涡流及卷渣行为进行观察研究。
This paper describes the characteristics of medium and thin slab continuous caster in detail and the principles must be observed to fit these characteristics during designing the casting powder.
详述了中薄板坯连铸机的特征，以及保护渣设计过程中，为适应这些特征所必须遵守的原则。
This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.
介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。
The present paper briefly introduces the liquid core reduction process during thin slab continuously casting and compares the technique of liquid core reduction with that of soft reduction.
介绍了薄板坯连铸过程中的液芯压下工艺，对比了液芯压下与软压下的区别。
Results from the analysis provides basis for the system optimization of the thin slab casting and rolling process.
分析结果为薄板坯连铸连轧流程的优化提供了依据。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
The status of thin strip production in thin slab casting and rolling process at Zhujiang steel is introduced, and main factors which affected the production is analyzed.
介绍了珠钢薄板坯连铸连轧生产线薄规格的生产情况，分析了影响薄规格生产的主要因素。
At present, some 60 thin slab strands are in operation or scheduled worldwide, of which about half have been equipped with EMBRs.
目前，大约有60条薄板坯生产线已经或正在计划投入运行，其中大约一半装备了电磁制动。
The production and technical situation of thin slab continuous casting with FTSC process in Tang Steel are introduced briefly.
简要介绍了唐钢FTSC工艺薄板坯连铸的生产技术情况。
It shows that thin slab continuous casting has a greater secondary cooling intensity, a faster solidifying rate, a fine and uniform structure and less segregation than conventional slab casting.
研究表明，薄板坯的二冷强度大，凝固速度快，组织细小、均匀，其内部溶质元素的偏析程度远低于传统连铸板坯。
Recent results from Handan, China show that the total oxygen content in a thin slab using EMBR is comparable with that of a conventional vertical bending slab without EMBR.
中国邯钢最新的结果显示，使用电磁制动后薄板坯总的含氧量可以同常规直弯式板坯媲美。
The thin, small slab has a touch-screen which displays whatever buttons, keys or icons are relevant to the task in hand.
这既小又薄的平板上有一个触摸屏，上面显示着执行各种任务时所需的按键图标。
It is pointed out that the inclusion content in melting steel and the status of caster play a key role for quality of thin slab.
指出在薄板坯连铸工艺流程中，钢水中夹杂物含量及连铸机工艺设备情况对薄板坯的质量起决定作用。
Based on the mechanism of defect formation for thin slab, this paper discusses control measures of molten steel smelting, including its chemistry, temperature, tramp elements, inclusions, etc.
从薄板连铸坯缺陷产生的机理出发，探讨了钢水化学成分、温度、残存元素、夹杂等方面应采取的控制措施。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
This paper mainly introduces the mould breakout detection system function arithmetic of thin slab caster in Tang Steel.
本文主要介绍了唐钢薄板坯连铸机结晶器漏钢预报系统的功能算法。
There are two core techniques in thin slab CC:one is curved mold and the other one is liquid core reduction.
薄板坯连铸有两个主要核心技术：一个是曲面的结晶器，一个是液芯压下技术。
CSP technology is one of the mainstream technologies in thin slab production. Manufacturing execution system plays an important role in the operational management for CSP production line.
CSP是薄板带钢生产的主流工艺之一，制造执行系统在CSP生产线的运行管理中起着至关重要的作用。
A video will be presented showing how steel flow in a thin slab caster with a tapered mold is influenced and calmed down when using the EMBR.
本文用一段录像显示一个带有一定锥度的薄板坯连铸结晶器内的钢液流动在使用了电磁制动后是如何受到影响并逐渐减弱的。
The paper reviews state of the art ground pressure theory of thin slab in coal mining such as scientific concepts, foundation argumentation, theoretical development and the field application.
文章阐述了采场薄板矿压理论建模的基本思想、立论依据、理论成果及其在煤层的普通开采和放顶煤开采中的实际应用情况；
The paper reviews state of the art ground pressure theory of thin slab in coal mining such as scientific concepts, foundation argumentation, theoretical development and the field application.
文章阐述了采场薄板矿压理论建模的基本思想、立论依据、理论成果及其在煤层的普通开采和放顶煤开采中的实际应用情况；
应用推荐