Additionally, the thickness distribution of solidified shell in slab mold are also studied in detail.
还研究了板坯结晶器凝固壳厚度分布。
Wall thickness distribution quite even, is reasonable, thus enhances the product anti - to drop the performance.
壁厚分布比较均匀、合理，从而提高了产品的抗跌落性能。
However, film spread evenly on the modified surface, film thickness distribution was uniform along width direction.
改性后液膜在表面基本铺展，整个宽度上液膜厚度分布均匀。
The wall thickness distribution of bent tubes by using ball filler is more uniformly than those by using rosin filler.
运用珠粒填料成形出的管材弯曲内外侧壁厚分布比松香填料的均匀。
The model is solved by using multi-grid method. Then obtain the hydrodynamic pressure and oil-film thickness distribution.
使用多重网格数值方法进行编程求解，得出了活塞环与缸套间的流体动压和油膜厚度分布。
However, film was spread evenly on the modified surface, and film thickness distribution was uniform along the width direction.
改性后液膜在表面基本铺展，整个宽度上液膜厚度分布均匀。
A new reflection method to measure the external diameter and the thickness distribution of the quartz tube is described in this paper.
本文介绍了反射法测量石英管外径及壁厚的原理和方法。
The strain, thickness distribution, diameter variation are analysed, and finally the practical prospect of the technology is pointed out.
并对壳体的应变分布、胀形前后的壁厚分布及直径变化进行了测量，指出了变厚度球壳的应用前景。
The film thickness distribution outside a horizontal test tube was measured with a film-thickness meter, to obtain the average thickness.
采用智能化薄膜厚度测试仪对水平管外液膜流动状态进行了研究，得到液膜厚度的几率分布和平均厚度。
The scale thickness distribution on SPHC strip rolled by CSP process is investigated and compared with that by traditional hot rolling mill.
研究了CSP热轧SPHC单张板和板卷的氧化皮厚度，并与传统热连轧产品进行了比较。
This paper is to research the thickness distribution across the strip and it's relationship with roll's thermal crown in asymmetric rolling.
研究了同步和异步轧制下无取向硅钢的冷轧织构及其沿层厚的分布特征。
Electroplating position: in a location in the plating liquid, and the relative position of the anode, can affect the film thickness distribution.
电镀位置：镀件在药水中位置，与阳极相对位置，会影响膜厚分布。
Sea ice thickness distribution along the flight line over Liudongwan Gulf and statistical curve relating brightness temperature to ice thickness are given.
文中给出在辽东湾测得航线上的冰厚度分布和亮度温度与冰厚度的统计曲线。
Furthermore, the thickness distribution gets more uniform when using the movable die and adopting loading mode 2 compared to that of adopting loading mode 1.
可移动凹模加载方式2比加载方式1更有利于板材厚度的均匀分布。
On the basis of comprehensive appraisal, the author predicts the thickness distribution of major oil-bearing sandstone in Moxizhuang Area via seismic inversion.
在综合评价的基础上，通过地震反演，预测了莫西庄地区主力含油砂体厚度的分布。
The results show that half-apex angle has a great effect on sheet thickness distribution, the smaller the half-apex angle is, the bigger the sheet thickness thins;
结果表明，半顶角对制件厚度变化起主导作用，其值越小，厚度减薄越严重；
As to the flatness calculating of CVC mill, a software is developed to predict the strip thickness distribution after rolling by using the influence function method.
针对C VC热连轧精轧机组板形计算问题，采用影响函数法开发了计算热连轧机轧后板断面厚度分布的软件。
The homogenization of sheet thickness distribution is improved. Finally, viscous pressure forming of conical part at room temperature and warm temperature were conducted.
分别进行了室温和加热时铝合金圆锥形零件粘性介质压力成形试验，试验结果与数值模拟具有相同的规律。
With the thickness distribution of a blade and the pressure or velocity distribution on its suction specified, the blade contour and the flow field of cascades that satisfy the gi…
对于给定的叶片厚度分布和吸力面上的设计压力或速度分布，应用本文方法可求得满足设计要求的叶片几何形状和叶栅流场。
Based on the combination method of free size and topology optimization, the best thickness distribution of the trunk lid inner panel assembly and the glue distribution are obtained.
采用自由尺寸与拓扑优化组合方式，得到该行李箱盖内板总成料厚和防震胶材料的最佳分布，并在此基础上设计出新的行李箱盖内板与铰链加强板结构。
The paper advances a feasible estimation methodology of using remote sensing data to calculate sea ice resource which includes ice extension and inversion ice thickness distribution.
文中提出了一种简单易行的海冰资源量遥感估算方法，包括提取海冰的结冰范围和反演冰厚分布。
Then Ni-Mn alloy electroformation tests are carried out for the model of a nozzle. The high thickness distribution uniformity and Mn content of the electroformed layers are obtained.
对某喷管模拟件进行了镍锰合金的电铸试验，得到了较均匀的电铸层厚度及锰含量分布。
In this mode, there is no wrinkle and crack in drawing parts, the thickness distribution is even and the overall forming quality is better, which meet the design and use requirements.
在该加载模式下，拉深件无起皱和拉裂缺陷，零件区域厚度分布均匀，整体成形质量较好，满足设计和使用要求。
The results show that there are obvious changes at film pressure distribution, maximum film pressure, film thickness distribution and minimum film thickness when there is misalignment.
计算结果表明，轴颈倾斜时，轴承油膜压力分布、最大油膜压力、油膜厚度分布和最小油膜厚度等都有明显的变化。
The change of coal thickness caused by geological structure is nonlinear and revulsion, but in a certain range, the mathematical expectation of coal thickness distribution is a fixed value.
由构造引起的煤厚变化具有非线性特征和突变性，但在一定的范围内，煤厚分布的数学期望为一个固定值。
The invention provides a rolling method for improving the outer layer thickness distribution of a composite plate, which belongs to the technical field of metal plastic processing and molding.
本发明提供一种改善复合板内外层厚度分布的轧制方法，属于金属塑性加工成型技术领域。
The simulation result of thickness distribution is in keeping with the measurement. The effects of sputtering condition on the distribution of thickness, energy and incident angle are also studied.
结果表明，膜厚分布的计算值与实测值符合的很好，并比较了不同气压、靶片距对淀积粒子能量和入射角分布的影响。
The influences of threshold pressure gradient, vertical heterogeneity, subzone thickness and areal sand thickness distribution on development of low-permeability heterogeneous reservoirs are analyzed.
根据低渗透非均质油藏的特点，分析了启动压力梯度、纵向非均质性、小层厚度和平面砂体厚度展布对该类油藏开发的影响。
The influences of threshold pressure gradient, vertical heterogeneity, subzone thickness and areal sand thickness distribution on development of low-permeability heterogeneous reservoirs are analyzed.
根据低渗透非均质油藏的特点，分析了启动压力梯度、纵向非均质性、小层厚度和平面砂体厚度展布对该类油藏开发的影响。
应用推荐