The influence of water temperature variation on thermal load on dam body.
库水温度变化对坝体温度荷载的影响。
Then, its indicator diagram, mechanical load and thermal load are analyzed.
同时对示功图、机械负荷和热负荷进行了分析。
This paper describes a multiple controller for a boiler thermal load system.
介绍了一种用于锅炉热负荷系统的复合控制器。
Thermal load increase has influence on service life of supercharged engines.
增压发动机热负荷的增加会影响发动机的使用寿命。
Shock wave and thermal load are the two main effects on the envelope during the discharge.
放电过程中，灯管主要受冲击波和热负载两方面的作用。
Half of the thermal load of a super-insulated home is due to heat losses through ventilation.
高隔热住宅的一半热负荷都归因于通风造成的热量损失。
The difference of exhaust temperature is considered as thermal load unbalance among cylinders.
各气缸排气温度不相同，被认为是各气缸工作不平衡的反映。
The whole ship slab under the thermal load is analyzed using the three dimensional finite element.
对温度荷载作用下整体滑动板块进行了三维有限元分析。
The development and the research of the thermal load of the diesel engine are reviewed in the paper.
新型柴油机的开发需要进行零部件的温度场、应力分布与变形分布进行分析。
A method for studying the thermal load of the precombustion chamber nozzle in the diesel engine is proposed.
本文提出了一种研究柴油机预燃室喷嘴热负荷的方法。
Another is based on ice water temperature with thermal load reset, can accurately meet both the load demand.
另一种是以冰水温度随热负载重置，可以精确地符合负载端需求。
The factors of influencing the thermal load and thermal stress at the peril point of hot forging die were analyzed.
分析了影响热锻模热负荷与危险点处热应力的因素。
After testing the temperature of the cylinder and cylinder-head, we have achieved the goal of greatly improving the thermal load.
实测气缸盖，气缸温度场表明，达到了明显改善风冷柴油机热负荷的目的。
The author discusses incidentally the drawbacks of thermal load controls fed with steam flow rate signal that could cause trouble.
目前流行的在热负荷调节系统中引入蒸汽流量信号的弊病。
Through temperature measurement it is found that max. thermal load is in the bridge zone between valve seats of the cylinder head.
本文通过测量气缸盖温度，找出气缸盖与气门间的“鼻梁”区域的最大热负荷处。
At present, the packaging industry has done plenty of works to the reliability in thermal load while the study of power load is very less.
目前，封装行业对器件热载荷可靠性做了大量研究工作，而对功率载荷的研究很有限。
Aim to present a design method of shape optimization for the piston structure with the thermal load and develop a program based on this method.
目的给出一种受热负荷作用的结构形状优化设计方法并编制相应的优化软件。
According to flight feature and transitional thermal load value, scheme of temperature adjusting system of electronic equipment cabin was presented.
根据高空高速飞行特点及瞬态热载荷值，确定仪器设备舱调温系统方案。
This article also calculated the upper limit of production capacity according to the sectional thermal load on wet kilns and five-stage preheater kilns.
本文还根据湿法窑及五级预热器窑的截面热负荷推算了预分解窑的上限产量。
The deformation of functionally graded truncated conical shell subjected to transverse mechanical load as well as non-uniformly thermal load is studied.
研究了功能梯度材料截顶圆锥壳在横向机械载荷与非均匀热载荷同时作用下的变形问题。
The heat transfer and hydrodynamic calculation results of the waste heat boiler show that water circulation is stagnant when the thermal load is very low.
高温取热炉传热计算和水动力计算结果表明热负荷较低时，水循环容易发生停滞。水循环回路结构复杂容易导致并联管内的流量分配不均匀性较大。
The influence of motor type to the thermal load and the effective material peak-value power density is analyzed, and the dimensions of the motor are selected.
通过对电动机结构型式与热负荷、有效材料峰值功率密度的分析，确定了电动机的外形尺寸。
Abstract: Air velocity as a principal parameter of thermal load affects the regulation of thermal balance of poultry along with ambient temperature and humidity.
摘要风速作为环境热负荷量的主要因素之一，与温度和湿度共同影响家禽热平衡调节。
Abstract : Air velocity as a principal parameter of thermal load affects the regulation of thermal balance of poultry along with ambient temperature and humidity.
摘要 ：风速作为环境热负荷量的主要因素之一，与温度和湿度共同影响家禽热平衡调节。
Since the thermal load and mechanical load of major moving components of the intensified engine are higher than before, users concern much about the safety of them.
强化后，由于活塞等主要运动件所承受的机械负荷和热负荷增加，其强度能否满足要求成为用户所关心的首要问题。
Thermal performance of a developing exhaust system was evaluated. The CFD and FEA methods were used to complete two design schemes of heat transfer and thermal load.
对某款正在开发的汽车排气系统进行热性能评估，应用CFD和FEA方法完成两种设计方案的传热与热负荷研究。
An experimental study has been conducted of the thermal load distribution in a tangentially fired boiler furnace with burners installed at the four corners of the boiler.
通过试验研究了四角布置切向燃烧锅炉炉膛内的热负荷分布情况，比较了投入与不投入夹心风时炉内热负荷分布的变化。
Finally, a theoretical formula is established, which describes the rule and stability condition of the morphological evolution for a void under mechanical and thermal load.
最后，本文给出了基于机械和热荷载共同作用下描述孔洞形貌演化规律及稳定性条件的解析方法及数值模拟结果。
The production mechanism of the surface residual stress producing in grinding process is the combined effect on extrusion stress and the cutting stress and the thermal load.
在磨削加工过程中产生表面残余应力，其产生机理是磨粒刃作用引起的挤压应力和切削应力及热应力的综合作用效应。
The production mechanism of the surface residual stress producing in grinding process is the combined effect on extrusion stress and the cutting stress and the thermal load.
在磨削加工过程中产生表面残余应力，其产生机理是磨粒刃作用引起的挤压应力和切削应力及热应力的综合作用效应。
应用推荐