Its mathematical theory and arithmetic are analyzed and the relevant procedures are written out.
对组合随机数发生器的数学理论和实现算法进行了分析,编写了相应的程序。
One theory and arithmetic "dual filter scan" of seeking peak in spectral analysis is brought forward and used for demarcate of spectrum and other analysis.
提出光谱分析寻峰的一种原理和实现的算法“两层扫描筛法”,用于光谱的标定和其它分析。
The thesis adopts repository system based on restrict theory and genetic arithmetic, models, arithmetic design and implement for order merger, roll plan, cast plan, converter plan of steal enterprise.
文中采用基于约束的知识库系统及遗传算法对钢铁企业生产的合同归并、轧钢计划、连铸计划、转炉计划进行数学建模,算法设计和实现。
The article analyzes the theory of culling and brings forward a new culling arithmetic idea and gives most VC code.
对物体裁剪的工作原理进行了详细的分析,提出了一个新的简便的裁剪算法,并给出了该算法的关键代码。
While dissertate the keys management theory and RSA arithmetic in detail.
同时对密钥管理理论及RSA算法作了详细论述。
By using the theory of common focus conic bundle, a kind of advantageous directness arithmetic about conic's focus is obtained, and an example is given.
利用共焦点二次曲线束的理论,得出了二次曲线的焦点的一种十分方便的直接算法,并给出了一个计算实例。
Firstly, after studying the mathematical morphological theory, the basic arithmetic and flow chart of mathematical morphology are introduced.
首先,研究了数学形态滤波理论。介绍了数学形态学基本运算的算法和流程图。
This article expatiate the theory and two kinds of practicable arithmetic of drilling time which used in the oil drilling process, and give notice of the two kinds in the design.
本文阐述了石油钻探过程中钻时参数的测量原理及其两种实用算法,并指出了在设计实现过程中的注意事项。
Based on the theory of integrated neural network, a hybrid integrated NN fault detection method is introduced in this paper. Its structure and arithmetic are fully discussed.
基于集成神经网络故障诊断理论,提出了一种混合型集成神经网络故障诊断方法,阐述了其结构和算法。
On the basis of convex optimization theory, the design method about optimal guaranteed cost reliable controller and standard controller transform convex optimization arithmetic.
根据凸优化理论,最优保性能标准控制器和最优保性能可靠控制器的设计方法转化为一个线性凸优化算法。
The article introduces the Chinese partition technology and the pattern matching theory, designs a solution for address data matching and conformity way in systematic flow according to the arithmetic.
本文系统地介绍了中文分词技术和模式匹配理论,依据他们的理论算法设计出解决地址数据匹配整合流程体系的方法。
Based on the classic examination theory, a constraint-based parameter model of generating examination paper is proposed and a recursive arithmetic based on the model is designed.
在经典测试理论的基础上,提出了一种约束试卷生成的参数模型,并根据该模型设计了一种自动试卷生成的递归算法。
According to the related optimizing theory, the Minimum Spanning Tree arithmetic and the Rectilinear SteinerMinimum Tree arithmetic were selected as the solution of the problem in this thesis.
然后根据相关的优化理论,提出了求解时间目标数学模型的最小生成树算法和求解距离目标数学模型的最小矩形斯坦纳树算法。
Based on fault diagnosis theory, network theory, matrix theory and computer arithmetic, a method of optimized erosion diagnosis for medium or large-scale grounding grid is discussed in this paper.
本文所研究的中大型接地网腐蚀优化诊断方法是将故障诊断学原理、网络理论、矩阵理论及计算机算法结合起来,应用于接地网腐蚀诊断这一工程实际问题。
In this paper, we connected fuzzy set theory with association mining, and proposed a fuzzy association data mining arithmetic.
本文把模糊集理论和传统的关联挖掘结合在一起,提出了一种模糊关联数据挖掘算法。
Aiming at this point, it introduces the theory of Concurrent Branch Patterns, and puts forward Concurrent Branch Patterns Mining based on the Maximum forward Path and gives relevant arithmetic.
正是针对这些非顺序模式,介绍了并发分支模式的相关理论,提出了一种基于最大向前引用的并发分支模式挖掘方法,给出了相应的算法。
The arithmetic based on the set theory analyzes the satiable conditions of all type of paper generating request, and gives out the implementation.
该算法以集合论为基础,分析了各种组卷要求的可满足条件,并给出了具体的实现方法。
The theory of fuzzy set is applied to discuss the fuzzy fault tree analysis and its application based on triangular fuzzy number arithmetic operations.
应用模糊集合理论,讨论了基于三角模糊数算术运算的事故树分析方法。
In this paper, application about discernibility matrix arithmetic and HORAFA arithmetic based on the rough set theory is introduced.
简要介绍了粗糙集理论中区分矩阵算法和HORAFA算法在知识约简中的应用。
I introduce the frequency allocation between BCCH carrier frequency and TCH, signal fading arithmetic, interference theory and the adjusting thinking of dynamic power control.
介绍了BCCH载波与TCH载波的频率配置、信号衰落算法、干扰原理、动态功率控制的调节思路,以及提高网络质量,改善小区登陆与切换性能的措施。
On trajectory theory and radar equation, build the model of pill velocity rule, imitate artillery echo, complete the arithmetic simulation of analog signal source.
本文根据弹道理论和雷达方程,建立了单弹丸速度变化规律的模型,模拟产生速射火炮回波信号,完成模拟信号源的算法仿真。
This paper introduces the theory and the arithmetic of 3d reconstruction from ct slices, and its application in the dental implantation navigation system.
文中介绍了CT图像三维重建的原理和算法,并给出在牙种植导航系统中的应用实例。
Firstly, based on the theory of pneumatic system design, the arithmetic of cylinder's diameter and the basis of components selection in charging (discharging) circuit are analyzed.
从气动系统设计的原理着手,分析气缸缸径的计算方法及进(排)气回路中气动元件的选型依据;
Applying DFT arithmetic and power electronical technique to harmonic analyses the loading-current in theory.
运用离散傅立叶算法和电力电子技术,对机车理论负荷电流的谐波进行了分析计算。
On the basis of convex optimization theory, the design arithmetic method and its steps about optimal guaranteed cost reliable control are provided.
根据凸优化理论,最优保性能标准控制器和最优保性能可靠控制器的设计方法转化为一个线性凸优化算法。
With analyzing an example first, through theory deducing once more is carried and finally list this method arithmetic steps and application fields.
首先从实例分析入手,然后进行到理论推导,最后列出了该方法的算法步骤与应用领域。
In this thesis, the basic concepts of cryptogram including number theory and modular arithmetic are introduced.
本文介绍了密码学的基本概念,包括数论的基础知识和模运算的概念。
The characteristic of diesel engine model and neural network modeling theory are analyzed in this paper. Based on compiling arithmetic, an example as used to validate the model's reliability.
分析了柴油机模型的特点及用神经网络建立柴油机排放模型的方法,在此基础上,编写了柴油机排放模型的算法,并用一个实例验证了该模型的可靠性。
The characteristic of diesel engine model and neural network modeling theory are analyzed in this paper. Based on compiling arithmetic, an example as used to validate the model's reliability.
分析了柴油机模型的特点及用神经网络建立柴油机排放模型的方法,在此基础上,编写了柴油机排放模型的算法,并用一个实例验证了该模型的可靠性。
应用推荐