This paper presents a mixed self adaptive design method by taking the state MRAC scheme from a reference model. It gives a detailed theoretical derivation and simulation proof.
在从参考模型取状态MRAC方案的基础上，提出了混合自适应设计方法。文中给出详细的理论推导和仿真验证。
Conclusion: This anatomical research might embody a theoretical principle into a clinical practice It's a new view and method for clinical operation design and practice.
结论：此项解剖学研究联系临床实际，为临床手术设计和应用提供了一个新的视角和方法。
Based on theoretical deduction, a new adaptive filter design is proposed. This method is applied to the approach for transfer alignment of inertial units on elastic body.
本文在理论推导的基础上，提出了一种新的自适应滤波方法，并将该方法应用于弹性体上惯性测量系统的传递对准。
The study provides effective numerical analysis method and theoretical basis for the design and optimization of automobile semi axle cross wedge rolling.
研究结果为优化和设计汽车半轴楔横轧设备提供了有效的数值分析方法和理论依据。
The simulation results show the validity of employed finite element method and it can provide theoretical instruction for aluminum extrusion die design and technique parameters selection.
模拟结果表明所用有限体积法是有效的，可以为铝型材挤压的模具设计与工艺参数的选择提供理论指导。
The experimental method and model may be inspected effectively to theoretical design.
试验方法和模型可作为检验理论设计的有效性。
Theoretical analyzing the Routine Method, Modified Routine Method, Multi-Hinge Ring Method and Beam-Spring Model Method respectively, and choose the appropriate design method after comparison.
分别对惯用法、修正惯用法、多铰环法和梁—弹簧模型法进行了理论分析，对比并选择了合理的设计方法。
So the accurate data from the photoelastic method providing reliable basis for the design and theoretical analysis of oblique frame bridge can be obtained.
由此可见，用光弹性试验方法可以得出较准确的数据，为斜交箱形框架桥的设计和理论分析提供比较可靠的依据。
The numerical simulation method would provide theoretical basis for optimum design for the pressure cooling system of apple in practical projects.
这种数值计算方法为实际工程苹果差压预冷系统的优化设计提供了理论依据。
This paper describes mainly a theoretical calculating method of the hydraulically expanded tube-to -tubesheet joints design.
本文主要介绍液压胀接管子-管板接头设计的一种理论计算方法。
The research shows that the method can provide theoretical basis for the design and application of a walking mobile chassis steering system.
研究表明，该理论分析方法可以为底盘转向系统的设计和应用提供了理论基础。
The paper not only discusses the construction quality control of backfill of sand cushion, but also provides the simple in-situ test method and deals with the theoretical analysis for its design.
本文针对砂垫层回填施工质量控制，提供了简易可行之现场测试手段，并就砂垫层设计方法作了理论分析和工程实践；
This research provides a theoretical method for design of a full column bolt with bottom plate.
此研究为带垫板全长锚杆支护设计提供一个理论计算方法。
Based on the theoretical researches and design practise, the design and calculation method of cyclone air separator was put forward.
在理论研究和设计实践的基础上，提出了旋风分离器的设计计算方法。
This article put more attention on computational method of it's product capability. The article provided theoretical support for the design of rotating cone reactor.
本文着重研究了转锥式反应器生产能力的计算方法，为转锥式反应器的设计提供理论支持。
The authors proposed a probabilistic design method based on theoretical analysis of reliability.
基于可靠性理论，提出了防洪堤的概率设计方法。
Based on theoretical research and engineering experience, an overall method of reinforcement and design is offered on existing building by citing a typical reinforcement sample of some library.
以某图书馆的结构改造加固典型实例，结合理论研究和工程经验阐述了综合性的加固方法和改造设计思路在旧有建筑改扩建工程中的应用和实践。
This paper adopts the theoretical method to research the problem on the performance prediction and the design of the propeller operating in ship wake systematically.
本文采用理论方法系统地研究了非均匀流场中螺旋桨性能预报和理论设计问题。
The results show that this method can improve the control and mechanical system design, and provide theoretical bases for robot control and performance improvement.
仿真结果表明，该仿真方法可以有效提高控制系统及机械系统的设计效率，为实现机器人的控制及性能改进提供了理论依据。
This method provides more reliadle basis in theoretical analysis and design of cross-flow fan.
这种分析方法对横流风机的理论分析及结构优化设计具有一定的实际意义。
A theoretical analytical method and a designing basis for the reasonable design of the deep ocean mining system are provided.
为采矿系统的合理设计提供了理论分析方法和设计依据。
The method is of important theoretical significance for their reliability design and provides guidance to their reliability calculation.
该方法对于机械系统可靠性设计具有理论意义，对生产实际机械系统可靠度的计算具有实际指导意义。
After Lyapunov function is DE - rived, with theoretical analysis, energy-based control design method is discussed in order to solve the global stability problem.
并在构建李雅普·诺夫函数及理论分析的基础上提出了基于能量的控制器方法。
Some theoretical issues of metamorphic mechanism such as structural theory, kinematics, dynamics, impact, control, and the design method, are elucidated.
阐述了变胞机构的结构学、运动学、动力学、碰撞与冲击、控制、及其设计等若干理论问题。
Paper is divided into two parts, core drill equipment and mud system. Through theoretical analysis to experimental method to complete the design of core drilling and mud system.
论文分为取心钻具和泥浆两部分，通过理论分析到实验的方法来完成取心钻具的设计与泥浆体系的建立。
The Institute perfect set of relatively complete system of sequential experimental design optimization of enterprise implementation process provides a reliable theoretical basis and method system.
本研究所完善的一套相对完整的序贯实验设计体系对企业实施过程优化提供了可靠的理论基础和方法体系。
The method can be applied to predict the damage or safety of the naval panels under explosive blast wave and can also provide a theoretical reference for safety defense design of a warship.
可应用于舰船结构在爆炸冲击波作用下的毁伤或防护方面的预测，从而为舰船的安全防护设计提供理论依据。
This method provides a theoretical basis and a means of numerical simulation for further improving the design of turbine stages.
为进一步改进透平级的设计，提供了理论依据和数值模拟的手段。
Theoretical analysis and simulation results show that IMC controller enables the system to be of good dynamic and steady performance. The design method is simple, and it is easy to be implemented.
理论分析和仿真结果表明，内模控制器能使系统获得优良的动态和静态性能，而且设计方法简单，控制器容易实现。
Theoretical analysis and simulation results show that IMC controller enables the system to be of good dynamic and steady performance. The design method is simple, and it is easy to be implemented.
理论分析和仿真结果表明，内模控制器能使系统获得优良的动态和静态性能，而且设计方法简单，控制器容易实现。
应用推荐