The theoretical and numerical simulation hysteresis loops are proximate, it shows that the theoretical calculation model is feasible.
理论计算与数值模拟得到的迟滞回线基本一致,说明本文采用的理论计算模型是可行的。
NSA (the normalized site attenuation) measurement and theoretical calculation model of compact EMC chamber is firstly introduced in this paper.
本文首先介绍了紧缩型电磁兼容(EMC)暗室归一化场地衰减(nsa)的测试方法和理论值的计算模型。
The accuracy of theoretical calculation model has been verified through the comparison and analysis between experiment data and theoretical computational data.
通过实测实验数据和理论计算数据的对比分析,验证了计算模型的正确性。
Based on the theoretical analysis on brake process of automobiles, the calculation model of practical safe following distance is set up.
在对汽车制动过程理论分析的基础上,建立了实用安全跟车距离计算模型。
On the basis of the model theoretical analysis and mathematical calculation are carried out.
在此模型的基础上进行了理论分析和数学计算。
The paper also illustrates the effect of this method by the calculation and analysis on a theoretical model.
文中还通过一个理论模型的计算来说明这种方法的效果。
The mechanics model of whole process of reinforced concrete beam section flexural rigidity is founded, based on the theoretical analysis the corresponding numerical calculation program is developed.
建立了钢筋混凝土梁截面抗弯刚度全过程分析的力学模型,在理论分析的基础上编制了相应的数值计算程序。
Using the results from finite element analysis of turbine rotor suppressed in heat stress, and simplified theoretical calculation equations, a mathematical model is established.
采用汽轮机转子热应力的有限元分析结果和简化的理论计算公式,建立汽轮机转子热应力的数学分析模型。
This paper presents the results of calculation of a column model with different meshes and the results are compared with those obtained from the theoretical analysis.
介绍了对不同粗细网格的立柱模型用有限元法进行计算的结果,并和解析法的计算结果作了对比。
By the calculation and simulation of Variogram, to build the theoretical model of Variogram of the ore-body.
通过变异函数的计算和模拟,建立了矿床的理论变异函数模型。
The theoretical calculation result indicates that the three-dimensional tooth arrangement model of PDC Bit's with the parameter method is precise and reliable.
理论计算结果表明,利用这种参数化建模方法完成的PD C钻头三维布齿模型是精确、可靠的。
This paper presents a theoretical model for realistic annular pressure loss calculation in which the eccentricity is a function of the well depth and a simplified method for field calculations.
本文介绍偏心度为井深函数的实际环空中压降计算的理论模型和便于现场使用的简化计算方法。
According to production practice and theoretical calculation results by energy mathematical model, it is proved that the method is feasible.
根据生产实践并通过总的能量数学模型及模型应用的理论计算结果说明该方法是可行的。
Duncan Zhang model, which has several parameters with definite physical meaning, is widely applied in theoretical calculation, design, and actual projects.
邓肯-张模型由于试验参数少,其物理意义明确,在很多理论计算、设计和实际工程中仍然广泛运用。
The agreement between the experimental data and theoretical calculation suggest that the selective resonant tunneling model is a good method for the reaction with evident resonant peak.
理论计算和实验在一定程度上符合得很好,这说明了选择共振隧穿模型是计算有明显共振峰的核反应截面的有利工具。
Given are theoretical model for the relationship among traffic flow parameters of the junction at on-ramps and calculation model for the capacity of on-ramps, based on the characteristics of on-ramps.
结合入口匝道的特点,给出了入口匝道连接处交通流参数之间关系的理论模型以及入口匝道的通行能力计算模型。
By the establishment of the dynamic model and theoretical calculation, we find out the immediate cause of the accidents and also put forward the methods of taking precaution against accidents.
通过建立动态模型和理论计算,找出了事故发生的直接原因,提出了预防事故发生的方法。
Experimental results and theoretical results are compared and both leak-off rates are approximate. It proved that leak-off calculation model which is established in this paper is high credible.
把实验结果与理论计算结果相对比,二者得到的滤失速率近似,证明了本文所建立的泥页岩压裂滤失模型具有较高的可信度。
At the same time, the phase equilibrium theory and the physical properties parameters calculation have been studied, which lays a good theoretical foundation for the use of compositional model.
同时,对油气体系相平衡理论和物性参数计算进行研究,为组分模型的运用奠定了坚实的理论基础。
This paper introduces the comprehensive mathematical model of traverse calculation, simplifies the teaching content and provide the theoretical basis for programming.
本文提出导线计算的综合计算模型,精简了教学内容,并为通用程序的编制提供了根据。
A theoretical model and fundamental calculation method were developed.
给出了一种理论模型和基本计算方法。
The calculation based on this model is suitable to the practical condition, and the calculation results have theoretical and practical value in a certain extent.
在该模型基础上给出的计算程序能够较好地适合实际情况,其结果有较高的理论和实用价值。
The theoretical calculation was in excellent agreement with the experimental results, and the validity of model formula was verified.
实验结果表明总传热系数理论计算与实验结果吻合较好,验证了模型公式的正确性。
Based on the analysis of the EMI sources and coupling paths of an off-line PWM converter, a high frequency model of EMI coupling paths is built and verified by measuring and theoretical calculation.
在对离线式PWM变换器电磁干扰源和电磁干扰传播通道分析的基础上,通过实测和理论分析相结合的方式,建立了电磁干扰传播通道的高频模型,并进行了验证。
The model experiment and the prototype observation proved the results of theoretical calculation and practical measurment.
模型试验及原型观测结果证明,理论计算和实际观测吻合。
The results show that the theoretical calculation values are approximately identical to the practical test ones. Therefore, it is proved that the model is rights.
结果表明,理论计算值与实际试验值近似一致,从而说明此模型是正确的。
The precision of Method L is better than those of other downward-continuation methods, which is illustrated by contrasting the theoretical model calculation value with the theoretical value.
通过理论模型及实测磁场向下延拓计算,说明L法比现有其它下延方法精度都高。
Theoretical model for the calculation of multi-lager hollow cylinder is proposed for the application to concrete pipes. Imitial stress distribution is Calculted on the basis of linear clastic theory.
针对其在自应力管中的应用,提出多层中空圆柱理论计算模型,按弹性理论计算出自应力管初始应力分布规律。
The dynamic analysis model is presented on the basis of examples and this structure system characteristics by way of theoretical analysis and numerical calculation, which can be applied fo…
本文根据实例及这一结构系统的特点,通过理论分析及数值计算,建立了系泊导管架的动力分析模型,为以后类似的工程提出了有效实用的解决方法。
The dynamic analysis model is presented on the basis of examples and this structure system characteristics by way of theoretical analysis and numerical calculation, which can be applied fo…
本文根据实例及这一结构系统的特点,通过理论分析及数值计算,建立了系泊导管架的动力分析模型,为以后类似的工程提出了有效实用的解决方法。
应用推荐