This method provides more reliadle basis in theoretical analysis and design of cross-flow fan.
这种分析方法对横流风机的理论分析及结构优化设计具有一定的实际意义。
From the overall scheme to the specific circuit modules, their theoretical analysis and design are done in detail, the corresponding software is designed also.
从总体方案到具体的单元电路，均做了详细的理论分析和设计，并设计了相应的软件系统。
According to geographical location and climate conditions in Shijiazhuang, we made theoretical analysis and design calculation on solar radiant floor heating system.
根据石家庄地区的地理位置、气候条件，对太阳能低温热水地板辐射采暖系统进行了理论分析和设计计算。
The paper details the USES of phase detection discriminator in radar receiver, describes the theoretical analysis and circuit design, and gives out the practical circuit and test requirements.
详细分析雷达接收机中鉴频器的作用，进行理论分析和电路设计，并给出具体电路和调试要领。
On this basis, it describes the circuit of the detailed theoretical analysis and the design of the modules.
在此基础上对各模块电路进行了详细的理论分析与具体电路设计实现。
Finally, all the bifurcation curves are obtained using the singularity theory, which provides theoretical basis for dynamic analysis and design of this kind of systems.
最后，运用奇异性理论得到了系统的全部分岔响应曲线，为这一类系统的动态分析与设计提供了理论依据。
This supply the helpful theoretical tools for nonlinear dynamic analysis and design of rotor-elliptic bearing systems in rotating machines.
为旋转机械转子-圆柱轴承系统的非线性动力学分析和设计提供了必要的理论基础。
The study provides effective numerical analysis method and theoretical basis for the design and optimization of automobile semi axle cross wedge rolling.
研究结果为优化和设计汽车半轴楔横轧设备提供了有效的数值分析方法和理论依据。
The biconical sampler is an ultra-wideband sampling device. The present paper performs the theoretical analysis, presents the formulas of design and some test results.
双锥取样器是一种超宽频带的取样器件。本文进行了理论分析、给出了设计公式及其某些测试结果。
Through the theoretical calculation and result analysis, the driving theory characters and design principles of channeled-vacuum-drum are obtained.
通过理论计算与结果分析，得出了槽式真空滚筒的传动理论特点及设计原则。
The structural analysis and optimization design based on probability have wide engineering background and are of important theoretical significance and research worthiness.
基于概率的结构分析和优化设计有着广泛的工程背景和重要的理论意义与学术价值。
Some conclusions different from linear structures have been drawn through the analyses of numerical example. Theoretical basis is provided for the structural dynamic design and analysis.
通过算例分析得到一些不同于线性结构的结论，为建筑结构动力设计与分析提供了理论基础。
The problem of design optimization of the point attach bit is discussed through theoretical analysis and discussion of experimental results.
通过对点式冲击刀具的理论和实验分析，探讨了如何优化设计使刀具受力最合理。
The theoretical model can be applied to the design and analysis of soil source heat pump system.
该理论模型可应用于土壤源热泵系统的分析和设计中。
Performance result was found in good agreement with theoretical analysis, which would be useful for engine field maintenance and controller design improvement.
特性分析的结果与理论研究相一致，该研究对发动机外场维护及控制器的设计改进有指导意义。
Judging controllability is an important study problem of modern control theory, it is also a theoretical foundation in systems of analysis and design.
能控性判定问题是现代控制论研究的重要课题，它是系统分析和设计的理论基础。
The paper not only discusses the construction quality control of backfill of sand cushion, but also provides the simple in-situ test method and deals with the theoretical analysis for its design.
本文针对砂垫层回填施工质量控制，提供了简易可行之现场测试手段，并就砂垫层设计方法作了理论分析和工程实践；
So the accurate data from the photoelastic method providing reliable basis for the design and theoretical analysis of oblique frame bridge can be obtained.
由此可见，用光弹性试验方法可以得出较准确的数据，为斜交箱形框架桥的设计和理论分析提供比较可靠的依据。
Appropriate radius range of forming part in swing forging machine is reached through theoretical analysis, which has certain guiding effect on the design and application of swing forging machine.
通过理论分析，得出摆辗机所适宜加工成形零件的半径范围，对摆辗机的设计和应用起到一定的指导作用。
In this paper, by theoretical analysis and numerical calculation, we design a high voltage pulse forming network, which can provide long duration voltage square wave for high power microwave sources.
通过理论分析和计算，设计一个高电压脉冲形成网络，用来得到高功率微波源需要的长脉冲电压方波。
In design of economizer, the gas addition pressure used to be determined by theoretical analysis and calculation, and the result cann't agree with what is real.
在经济器系统的设计中，中间补气压力往往通过理论分析和计算确定，但所得结果与实际情况并不能很好符合。
These provide theoretical calculation basis for analysis of high mode flexural vibration of plate and design of big round plate and multi nodal compound flexural ultrasonic transducer.
对薄板的高次弯曲振动模式的分析及大圆盘、多波节复合弯曲超声换能器的设计提供了理论计算依据。
By theoretical analysis and experiment, we obtain approximate constant modulation sensitivity, which fits for the overall design, and reach fairly good effect.
经理论分析及实验，获得近似于恒定的调制灵敏度，符合整机设计要求，在整机中显示出较好的效果。
Through the analysis of the urban public transportation system, a new theoretical model based on GIS isochrone approach is put forward and a design prototype is described with an isochrone analysis.
提出了基于GIS等时线分析方法的理论模型，以城市公共交通运输系统的主要工具——公共汽车和城市火车为例，描述了等时线分析的设计原型。
Rigidity, strength and vibration analysis are important to the blade of hydrodynamic turbine, both in theoretical and actual fields, such as optimum design, stable operation and damage preventing.
水轮机转轮叶片的刚强度与振动特性分析对水轮机的优化设计、稳定运行、防止事故发生等都有重要的理论与实际意义。
Based on theoretical analysis and test research, the design requirements of the structures are put forward.
在理论分析和试验研究的基础上，给出了带加强层框架—芯筒结构的几点设计建议。
Through the analysis of error and process, we gave some improving advice about the theoretical design which can control the dispersion errors or retard errors under 5 percent.
文中通过误差分析，工艺技术分析，对理论设计提出了改进意见，设计样品色散误差和延迟误差均可控制在5%以内。
The theoretical and simulation analysis about acoustic signal processing in multi-path channel and the engineering software design are given in the dissertation.
该系统采用主动工作方式，本文系统地研究了在多途信道中对声学信号进行处理的理论研究和仿真分析及工程软件设计。
The theoretical and simulation analysis about acoustic signal processing in multi-path channel and the engineering software design are given in the dissertation.
该系统采用主动工作方式，本文系统地研究了在多途信道中对声学信号进行处理的理论研究和仿真分析及工程软件设计。
应用推荐