The failure assessment diagrams were derived from the tensile test results.
评定根据母材和全焊缝拉伸试验结果建立评定曲线；
The factors of the tensile test of carbon fibers were discussed in this paper.
本文讨论了碳纤维强伸实验的影响因素。
It is found that the weld of fine grain steel break apart from heat effect zone in the tensile test.
经实验发现细晶粒碳钢焊接接头拉伸试验断口在远离热影响区的母材上。
This paper discusses the fracture shape of the tensile test sample in practice teaching of mechanics.
本文就力学实践教学中拉伸试样断口形状问题进行探讨。
Through the tensile test in SEM, the constraint effects of particles have been investigated qualitatively in microscope.
在SEM下的拉伸试验，直接从微观上证明了这种约束的作用。
According to the processing performance titanium alloy materials, using a CNC machining center processing the tensile test specimen.
根据钛合金材料的加工工艺性能，采用数控加工中心加工出拉伸实验所用试件。
The tensile test of Q235 steel samples with notches of different depths and their damages were monitored by acoustic emission technique.
用声发射监测带有不同深度缺口的Q2 35钢试样的拉伸试验，由声发射信号分析判断缺口发生破坏的情况。
A calculation of optimal design for the structure of tensile test device has been made, for the purpose of increasing the preciseness of the tensile test.
本文从提高带材张力测试精度出发，对两台单机座冷轧机的张力测量装置的结构参数进行优化设计计算。
Moreover, in order to fulfill the tensile test of rat skin, we improved the two-axle tool microscope. The improvement provides the microscope with the basic …
为完成鼠皮抗拉性能的测试，对双轴工具显微镜技术改造，使其具有微型电子万能试验机的基本功能。
Through the tensile test in room temperature, tube forming performance parameters are obtained, and the effect of tensile speed on these parameters is researched;
通过室温下的拉伸实验获得了管材的成形性能参数，并研究了拉伸速度对这些参数的影响；
The change of strain rate and stress rate of samples with and without yielding phenomenon was studied during the tensile test under the control of grip separate rate.
采用夹头分离速率控制方式对有屈服现象和无屈服现象的试样进行拉伸试验，探讨了试验过程中试样应变速率和应力速率的变化情况。
The tensile test of Q235 steel under static loading condition was done, and the stress of every level selected was tested by EMS2003 metal magnetic memory testing system.
选取Q 235钢进行静载拉伸试验，利用EMS2003型磁记忆检测系统进行各级应力水平的检测。
Direct tensile, acceleration, and shock wave tests belong to the tensile test group, whereas adhesive tape, direct shear, peel and scratch tests belong to the shear test group.
直接拉离、加速和冲击波等方法属于拉力法，而胶带、直接剪切、剥离和划痕等方法属于剪切法。
The method was also used to measure strain in the tensile test of a composite laminate plate. The results agree fairly well with those obtained by the conventional measurement.
并进行了复合材料板拉伸试验，复合材料平板实验计算结果和应变电测法得到的结果进行了对比，实验表明两种测量方法得到的结果相吻合。
The tensile test fracture area locates on weld seam, and the hardness near HAZ fusion line is the highest, away from the fusion line, the hardness declines and reach the parent metal hardness.
焊接接头的拉伸试验断裂部位在焊缝。焊接HAZ熔合线附近的硬度值最高，远离熔合线硬度降低，并逐渐接近母材金属的硬度。
The sensibility of the harden structure of high carbon steel to hydrogen and stress is researched through the tensile test of quenched specimens and charging hydrogen specimens after quenching.
利用高碳钢淬火试样及淬火后充氢试样的拉伸试验，研究了高碳钢淬硬组织对氢和应力的敏感性。
The relationship between stress and strain in a particular material is determined by means of a tensile test.
最佳答案之间的关系应力和应变在一个特定的物质决心通过拉伸试验。
Is plated copper tensile strength and elongation being tested? If so, what is the test frequency.
有无对镀铜板进行抗拉强度和延长进行测试？如果是这样，你的测试频率是怎样？
Universal tensile testing machine can analyze the test results, such as elongation, average value, the stress, strain and damage, etc.
万能拉力试验机可剖析整个测验的成果，例如伸长量、应力、应变、损坏值、平均值等。
The centrifugal model test for slope damage mechanism with different water contents indicates two types of damage, namely whole body slide and tensile rupture.
不同含水量土质边坡破坏机理离心模型试验表明，土质边坡破坏存在两种形式，整体滑坍破坏和拉裂破坏。
Tension eccentricity of the specimen section is the main problem in concrete homogenous tensile strength test.
试件截面受拉偏心是混凝土均匀受拉强度试验中存在的主要问题。
If a tensile test specimen fails to meet the requirements of 7.4.2, two further test specimens shall be obtained for each one that failed.
如果抗拉强度试样不符合7.4.2的要求，对每一个不合格的试样再取两个试样进行试验。
Mechanical properties of the blends were investigated by tensile mechanical test.
采用拉伸力学试验研究了共混物的力学性能。
The characteristic values of micro shear test and tensile test of alloy aluminium were determined and the quantitative expressions of these characteristic values were studied.
测定了铝合金的微型剪切试验和拉伸试验的性能参数，研究了这些性能参数之间的数量关系式。
This paper presents the design and production of submarine composite power cables with optical fibers as well as the mechanical tests-wrapping test, tensile test and bending test.
本文叙述了海底光纤复合电力电缆的设计、制造及进行的盘绕、拉伸、张力弯曲等机械性能试验。
This paper analyzes the uncertainty of tensile test measurement for square specimen and gives formulae to calculate the uncertainty of measurement.
对矩形试样拉伸试验测量的不确定度进行分析，得出了计算其不确定度的公式。
The backlight photography with single sample was used to measure the true stress-strain of the ductile material after necking in tensile test.
本文采用单试样逆光拍照法对延性材料拉伸试验缩颈后的真实应力-应变进行了有效的测量。
The toughening mechanism of ADI was investigated by microstructure analysis and fracture characteristics of the specimens under tensile test. contact fatigue and stress fatigue.
通过奥贝球铁的单调拉伸加载、接触疲劳和应变疲劳等宏观断裂规律和微观分析，探讨其强韧化机制。
To meet the needs of tensile test for small diameter bolt and screw, this article gives a design of tensile testing device.
针对小直径螺栓和螺钉的拉伸试验要求，设计了一种拉伸试验装置。
To meet the needs of tensile test for small diameter bolt and screw, this article gives a design of tensile testing device.
针对小直径螺栓和螺钉的拉伸试验要求，设计了一种拉伸试验装置。
应用推荐