The formula of tube expanding force is deduced using the slab method.
采用主应力法推导圆管扩径时扩径力的解析式。
The distributed pressure on the interface was obtained using the slab method. Analytic formula of the microconvex surface of plano-sizing die for long rectangular plate has been derived.
利用主应力法求出接触面上的分布压应力，导出了平面精压长矩形板模具表面微凸面形状的解析公式。
The section design method of slab strips for reinforced concrete and post tensioned concrete slabs is discussed in detail.
详细讨论了基于有限元分析的钢筋混凝土和预应力混凝土楼板的板带截面设计方法。
In combination of typical project case, the detail discussion on correlative factors in toe slab design and design method are carried out.
结合典型的具体工程实例，对目前采用的趾板设计的方法、趾板设计中应考虑的相关因素进行了较详细的讨论。
The existing experimental method cannot accurately calculate the ultimate carrying capacity of the reinforced concrete slab column connections subjected to moment and shear.
现有的经验方法无法准确计算同时传递竖向剪力和不平衡弯矩的钢筋混凝土板柱中节点的极限承载力。
The application and measuring method of a slab surface temperature measuring system for secondary cooling zone of continuous casting are introduced.
本文介绍一个连铸二冷区铸坯表面温度测量系统的测量方法和实际应用情况。
In order to design irregular prestressed concrete floor, formulas of anisotropic finite element method to analyze the internal force of prestressed concrete hollow slab have been presented.
考虑预应力混凝土空心板的构造特点，推导了进行板内力分析的各向异性有限元法公式。
The method, formulas and flow chart of computing program GBHST for reinforced concrete slab design are introduced in detail.
本文详细介绍了钢筋混凝土盖板涵设计计算程序gbhst的方法、公式和流程图。
Using the theory of design on plate deformation, with attainment of high yield, we can find mathematics model and method on slab calculation.
利用中板变形规程的设计原理，以提高成材率为目标，得到了坯料计算的数学模型及基本方法。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
The basic theoretical methods such as Slab method, UBET, Slip Line method, FEM, and FVM have been used in the research of metal plastic forming technology.
研究金属塑性成形规律的理论方法现在有主应力法、上限法、滑移线法、有限元法和有限体积法。
The parameters of the optical slab glass waveguide (refractive index and thickness of thin film) were measured by a new technique for using the prism coupler, i. e., leaky mode method.
由使用棱镜耦合器的一种新技术即漏模法，测量了平板玻璃光波导的参数(薄膜的折射率和厚度)。
The distingUishing featUres of the paper are the influences of line loads on models of yield line, the method of selecting strips, and the method of the limit analysis of the slab under line loads.
文章的主要特点为线荷载对屈服模式的影响，条带的选取方法，线荷载作用下板的极限分析方法。
For design of foundation slab, method of evaluating coefficients of foundation bed has been introduced in the design Code for Dry Dock.
对基础板的设计，干船坞设计规范中介绍了地基基床系数的取用方法。
In this paper, the finite element method is used to analyze the behavior of the prestressed V-shape slab Roof structure, especially the effect of temperature change on the stress of slab.
采用有限元法对雁形板屋盖结构的空间受力特性进行了分析计算，并着重考虑了温度变化对板截面应力的影响。
The paper introduces the concrete face slab fissures and defects in Xiaoshan hydropower station as well as its repairing material and method.
文章详细介绍了小山水电站面板混凝土裂缝与缺陷修补加固用材料、修补加固方法。
The design parameters and the calculating method of the slab thickness were given.
确定了结构设计参数及路面板厚度计算方法。
The establishing method for the on -line mathematical model of the steel slab heating and several major control strategies are described emphatically.
重点叙述了钢坯加热在线数学模型的建立方法和几个主要控制策略。
The design method of thick slab of transferring storey of the commercial and dwelling building is introduced, and the measures of the main technical issues are presented in this paper.
对某商住楼结构转换层厚板的设计理念和一些主要技术问题的处理方法进行了探讨。
However, the research is only in a initiate stage, the complete theory of design has not been built, and the current method is only refer to the solid slab design process, or according to experience.
但目前对无梁空心楼板的研究仅刚刚起步，尚未建立起一套比较完整的设计计算理论和方法，实际工程中只能借助实心无梁楼盖的设计方法及设计人员的经验。
Through the analysis of the stress characteristics of the circular pipe cavity mushroom floor, this paper analyzes the calculating model and method of the floor slab.
通过分析圆管式空心无梁楼盖的受力特点，分析了此楼板体系的计算模型及计算方法。
The purpose of this paper is to discuss Prof. method of analyzing two-way reinforced concrete slab.
本文的目的是介绍苏联格娃斯捷夫教授的计算双向板的公式。
The temperature distributions in the diode-side-pumped slab laser medium have been calculated by means of the finite difference method.
用有限差分法对二极管侧泵浦板条激光介质的温度分布作了数值计算。
With the dynamic explicit elastic plastic finite element method, the unsteady deformation of the bite stage in slab rolling was simulated.
采用显式动力学弹塑性有限元方法，对平板轧制过程中咬入阶段的非稳定变形进行了数值模拟。
By tracer method, the inclusion behavior during FTSC (flexible thin slab casting) thin slab casting was studied.
采用示踪法研究了FTSC薄板坯夹杂物行为。
The structural behavior of cellular voided slab was analyzed by finite element method, difference between cellular voided slab and ribbed or waffle slab was pointed out.
采用有限元法对比分析了蜂窝式空心板的受力特点，指出了蜂窝式空心板与密肋楼板和井式楼板受力机理的不同。
The paper analyses the stability of rib slab on method of energy, the formula of longitudinal critical force is deduced, and rational arrangement of stiffening rib is discussed.
利用能量法分析了加肋平板的稳定问题，推导了纵向临界力的计算公式，并探讨加劲肋的合理布置。
The paper analyses the stability of rib slab on method of energy, the formula of longitudinal critical force is deduced, and rational arrangement of stiffening rib is discussed.
利用能量法分析了加肋平板的稳定问题，推导了纵向临界力的计算公式，并探讨加劲肋的合理布置。
应用推荐