This number can then be used to derive any adjustments to the drive current or voltage in order to keep the flux output (or the color output of an RGB series of LEDs) inside the visible limit.
我们随后可用这些数值来调节驱动电流或电压，从而确保通量输出（或RGB系列LED的色彩输出）在可见范围之内。
This process of converting the transducer output into a voltage signal which can be connected to the rest of the system is called signal conditioning.
这种将传感器输出转换成电压信号，并与系统的其它电路相连接的过程，称为信号调理。
Using the method of firing Angle prediction, steady sinusoidal output voltage with low harmonic components can be generated.
通过开关角预置方法，叠加出了谐波含量低的稳压正弦波输出。
Increasing the efficiency of DC voltage can be helpful to increase the output voltage of the inverter.
提高直流电压利用率可以提高逆变器的输出能力。
Experimental results verified that the proposed scheme has the advantage of simplicity and feasibility. It can be applied to pure sinusoidal output Voltage Source Inverter.
实验结果表明所提出的方案简单可行，适用于纯正弦输出的电压源逆变器。
The input voltage ranges of sampling channels can be set up by programme to match it with output voltage ranges of various instruments.
可通过程序设置采样通道的输入电压量程，使之与各种不同输出电压量程的仪器相匹配。
In many test applications, the voltage and light output of the diode can be measured simultaneously using a fixed source current value.
在很多测试应用中，二极管的电压和发出的光可以利用大小固定的电流源同时测出来。
The output signals may be resistance signals( resistance value can be set by yourself) or voltage signals.
输出信号有电阻信号（阻值可自定）、电压信号。
Can be designed into various form, the use of an integrated structure, can obtain higher output voltage and photoelectric conversion efficiency.
可以设计成各种形式，利用集成型结构，可获得更高的输出电压和光电转换效率。
The pole of the output voltage is connected to the balance housing, which can be grounded for operation.
输出电压的负极与电子天平壳体连接。在进行操作时，电子天平壳体允许接地。
The subroutine can be used to calculate the deformation of structures subjected to electric field, and the output voltage of micro-accelerometer subjected to acceleration.
这个程序可以计算静电力使结构发生的变形，可以计算加速度作用时微加速度计的输出电压。
By using the time variant modulation ratio method, the harmonics can be eliminated and a sinusoidal and balanced output voltage or input current is obtained.
通过采用时变调制比的方法，可以消除不对称输入电压的影响，从而获得对称正弦输出电压或输入电流。
The output of sensor is frequency and voltage. It can be direct connect with monitoring system.
传感器的输出为频率量和电压量，可与监测系统联接。
The experimental results prove that the sine wave inverter designed by this method have good stability and high quality output voltage and can be applied in practice.
实验结果表明，利用该方法设计的无差拍控制正弦波逆变器系统稳定性好、输出电压波形畸变率低，具有一定的实际应用价值。
Feedforward signal includes the information of both grid voltage and DC side load. Power balance between the input and output can be maintained by adjusting AC side currents.
前馈信号同时包含了电网电压和负载的信息，通过快速调节交流侧进线电流，使得系统功率平衡得以维持。
This circuit has the character of the flyback converter as well as the forward converter, single voltage output can be achieved by one transformer.
这种变换器综合了正激和反激变换器的特点，并且只用一个变压器实现了单路电压输出。
From the data simulation, the feasibility of the steady work of HVU and the wobbling feature of its output voltage with the change of other parameters can be theoretically obtained.
通过数值模拟，可以从理论上预言高压单元工作点的稳定性以及输出电压随其他参数波动式的变化。
By digital adjustment with high precision on the DC bias of reference sine wave, the DC bias contained in inverter output voltage can be adjusted to restrain DC circulating current.
通过对逆变器基准正弦波直流分量的高精度数字调节，相应调节逆变器输出电压直流分量以抑制直流环流。
The average inductance current can be calculated by input voltage and output voltage to use in PI regulator.
通过采样输入输出电压以获取电感的平均电流，从而代替了实际的采样电流，以进行PI调节。
The voltage value related to its capacitance value can be output directly by the measurement circuit.
测量电路可直接输出与电容值相对应的电压值；
The experimental and analytical results demonstrate that wide bandwidth, high voltage output and long-time stability can be achieved with power MOSFETs and a closed-loop scheme.
实验与分析表明，高压直流放大器采用功率场效应管和电压闭环控制后，可拓展放大器通频带，提高放大器输出能力和长时间稳定性。
Second, the management of power output power can be carried out by PID control mode, which is based on the error of judgment and aims at control the chopper output voltage.
采用基于误差优先判断的PID控制方式来控制斩波器输出电压，从而实现电源输出功率的控制；
The revised CVT output obtained by the method can be used as correct voltage inputs of power system fast protections and fault locating devices based on the transient theory.
利用该方法可为反应暂态原理的电力系统快速保护和测距装置提供准确的电压信号。
Output amplitude in both modes can be controlled by varying the DC source voltage or by varying the pulse-width (pulse-width modulation, PWM).
两种形式的输出幅度可以通过改变直流电源电压或通过改变脉冲宽度(脉宽调制pwm)来控制。
Numerous such devices can be connected in series to increase the output voltage or in parallel to increase the maximum deliverable current.
很多这样的设备可以连接在系列增加输出电压或并行增加当前最大的可交付件。
It is shown by simulation results that output voltage can be increased and the THD of output voltages can also be greatly reduced due to the MZSVI compensation technique.
仿真结果表明，采用MZSVI补偿方法后提高了输出电压，输出电压总谐波含量THD也大大减小。
The output characteristics also make the AD590 easy to multiplex: the current can be switched by a CMOS multiplexer or the supply voltage can be switched by a logic gate output.
这种输出特性还便于AD590实现多路复用：输出电流可以通过一个CMOS多路复用器切换，或者电源电压可以通过一个逻辑门输出切换。
The linearity correction circuit of positive feedback can make the output voltage be linear with the temperature, so the measurement accuracy of the system is improved.
采用新型薄膜铂温度传感器设计了多点温度检测系统，使用正反馈型线性校正电路使输出电压与温度成线性关系，从而提高了检测系统的测量准确度。
PSS technique can be used for the output voltage or current regulation by employing an auxiliary winding.
初级侧感测方法可藉由辅助线圈來达到输出电压或电流的控制。
The output of the DC voltage can be regulated in a wide range only by changing the datum component.
输出DC电压可在很宽的范围内任意调节，只需要改变基准电压元件。
应用推荐