The molding process of foam pattern for lost form casting is introduced.
介绍了消失模铸造泡沫模样的成形过程。
In this paper, the molding process of UHMW-PE milled head and its properties are introduced.
本文介绍了超高分子量聚乙烯滚压头成型工艺及制品的性能。
Resin shrinkage during the molding process will result in a part that is smaller than the master model.
成型过程中，树脂收缩将会导致部件比原模稍小。
Then the paper expatiates the system structure and the advantages and disadvantages in the molding process.
详细阐述了其系统构成及成形过程中的优缺点；
The molding process and equipment of the polyurethane sieve-plate were compared to those of rubber sieve-plate.
并将其与橡胶筛板的成型工艺和成型设备进行了对比。
The mold temperature obviously influences the molding process, while the melt temperature influences comparatively less.
模具温度对成型过程的影响较大，熔体温度的影响相对较小。
The molding process of refrigerator water receiver, structure and work process of injection mold are introduced in detail.
详细介绍了冰箱接水盒注塑件的成型工艺及注射模的结构及工作过程。
That is, software can not only be molded into almost any form, but we can also perform the molding process itself in almost any way we like.
也就是说，软件不仅可以被塑造为不同的形式，而且能够以任意方式执行这一塑造工作。
The magnet and yoke are fully encapsulated during the molding process to completely surround the magnet and yoke in a protective plastic shell.
磁体和轭在成型过程中进行完全封装，以便将磁体和轭完全包围在保护性塑料壳内。
It can greatly shorten the molding process, decrease energy consumption, reduce labor intensity and improve the yield and corrosion resistance.
该工艺可大大缩短成型加工周期，降低能耗，减轻劳动强度，提高成品率和防腐性能。
The facture technics of the mould of composites was described. A method of solving the problems which appear in the molding process is proposed.
论述了该复合材料模具的制作工艺，针对制作过程中经常出现的问题提出了解决方法。
The influence of such factors as temperature. pressure and molds on the product quality in the molding process of PET blowing bottle was inquired.
探讨了PET吹塑瓶成型工艺中温度、压力及模具等因素对制品质量的影响。
Four, the size is stable, in the molding process, the plastic part and the mold contact surface compared to leave the mold part the size stability to be better.
尺寸稳定，在成型过程中，塑件与模具接触的面要比离开模具部分的尺寸稳定性更好。
I just saw your animated work Night, which also used some comparisons, comparing the molding process of strawberries to the decomposition process of a human skeleton.
刚才看了你的动画作品《夜》，其中也运用了一些对比，就是比较草莓的霉变过程与人的骷髅的腐化过程。
Through analyzed the molding process of the the split air-condition wind-casing, introduced in detail the injection mold structure design, mold design thought and mold design point.
通过对分体空调器出风框的工艺分析，详细介绍了出风框的塑料注射模结构设计，以及设计思路与设计要点。
The correctness of this method was demonstrated by investigating the molding process of 2.5D braided fabrics, making test pieces and comparing the experiment results and theoretical predictions.
研究了2．5D编织物的复合成型工艺，制作试件并通过实验值与理论预测值的对比，验证了该方法的正确性。
This moment would serve as the spark that set in motion a process of learning life lesson, molding me into the person you’re reading through your computer screen.
也正是这火花闪动的一刻助我开始学习生活课程。 最终把我塑造成你们现读到的我。
Copper production process for the lead with raw materials, through multi-channel Flap molding.
铜条生产工艺铅带为原料，通过多道折边成型。
The process of the injection molding is quite complicated because of the character of the material itself and the complexity of processing conditions.
由于材料本身的特性以及复杂的加工条件，塑料注射成型过程加工过程相当复杂。
On the ground of movement characteristics of macromolecules during the injection molding process, a thought is put forward that a point will shrink along its flow path.
根据注塑成型过程中高分子的运动特点，提出注塑成型制品的各点在收缩过程中将沿其流动路径进行收缩的观点。
The previous two factors are constant during the process of injection molding, only the plastic process parameters can be regulated by the operator with the injection process and experience knowledge.
在制品的注塑过程中，前两个方面都是固定的，只有注塑参数可以由操作者根据注塑情况和经验知识进行调整。
The extrusion molding process and main equipment for producing PE large diameter pipe with negative pressure sizing technology are studied.
对采用负压定径技术生产大管径聚乙烯管的挤出成型工艺及其主要设备进行了研究。
The molding method, process, and the equipment of thermoset runnerless injection molding have been discussed in this paper.
论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。
Block, backplane: high-quality oak molding by the mold pressing, grinding process by profiling, do the multi-layer paint finishes.
座、背板：采用优质橡木经模具热压成型，经仿形打磨工序、做多层油漆饰面。
Full supervision of plastic pallets, trash injection processing, production process each link, the intention to build the first-class injection molding products.
对塑料托盘、垃圾桶注塑加工、生产流程各个环节进行全程监管，用心打造一流注塑产品。
Based on the study of molding process of telephone panel, the process of injection molding of products was simulated and analyzed by CAE technique.
文章以电话机面板外壳的成型工艺为研究对象，利用CAE技术对产品的注塑成型过程进行了模拟和分析。
The temperature, injection speed, injectionjectio n pressure, and holding pres sure of the injection molding process should be controlled to achieve high quality of injection molded part.
温度、注射速度、注射压力和注射成型过程的保压压力是获得较高制品质量的重要影响因素。
To make the best use of past experience in setting of the injection molding process parameters, case-based reasoning method was used to obtain injection molding process parameters.
为了充分利用以往的经验，用于注塑成型工艺参数的设置，采用基于案例的推理方法用于获取注塑成型工艺参数。
To make the best use of past experience in setting of the injection molding process parameters, case-based reasoning method was used to obtain injection molding process parameters.
为了充分利用以往的经验，用于注塑成型工艺参数的设置，采用基于案例的推理方法用于获取注塑成型工艺参数。
应用推荐