Secondly, the modal analysis for steel gate is carried out.
其次,对钢闸板进行了模态分析。
The 3-d finite element model is built for the modal analysis of board-level package.
建立了板级封装的三维有限元模型并进行模态分析。
The comparison with the results in theory shows the modal analysis has obtained accurate results.
与理论计算值比较表明,有限元法可获得很高精度。
Finally, the modal analysis is obtained and the resonance frequency is determined by using finite element software ANSYS.
再用有限元软件ANSYS进行模态分析,确定了共振频率。
Then validity of the dynamic model was illustrated by comparison with the results of the modal analysis by ANSYS software.
利用ANSYS商用软件进行主动隔振单元的模态分析,对比结果验证了该动力学模型的正确性。
A entity model for the cylinder block of YC6108 diesel engine has been constructed and the modal analysis been implemented.
建立了YC 6108柴油机气缸体的实体模型,并进行了有限元模态分析。
The validity of modal analysis was proved by comparing the modal analysis results with the measured results of a prototype motor.
通过比较一台实验样机的模态分析计算结果和实测结果,证实了模态分析计算的有效性。
Static and dynamic frequency and dynamic stress are analyzed by using the modal analysis method and the transient dynamics method.
通过模态分析、瞬态动力学的方法,分析了叶片的动频、动应力。
First through the modal analysis, this paper obtained the dynamic characteristics of this structure, giving reference for relevant design.
首先通过模态分析,明确了此结构的动力特性;可为相关设计提供参考。
According to the modal analysis, the natural frequency is not coincident to working frequency, so there would be no resonance occur during work.
由模态分析看出,筛箱固有频率和工作频率不重合,因此在工作中不会产生共振。
Researches represented in this paper are the modal analysis and experimental modeling of the composite beam, and its static and dynamic stability.
本文研究了复合梁的模态分析结合实验建模方法,及其静力与动力稳定性问题。
On the basis of the modal analysis, the nonlinear finite element is used to analyze the dynamic response of suspension pipe bridge to cross wind excitation.
在模态分析的基础上,采用几何非线性有限元的分析方法,对悬索式管桥进行了横向风共振分析。
It provides theoretic basis for the design and safe operation of the tower and the further dynamic analysis of wind turbine tower through the modal analysis.
通过进行模态分析,为塔架设计、安全运行和结构动力学分析提供更可靠的理论依据。
The result showed that the three methods could be used in the modal analysis of the above-mentioned structure, and its natural frequency could well be obtained.
结果表明,三种方法均可用于钢管混凝土框架结构模型模态分析,并能较好地得到结构固有频率。
ANSYS is used to make the modal analysis of a plane truss structure model, then APDL is used to compile procedures to calculate flexibility difference curvature.
作者利用ANSYS有限元分析软件对一个平面桁架模型进行了模态分析,并用APDL语言编制程序计算该结构的柔度差值曲率。
Using the modal analysis method in this paper, the vibration characteristics of ZJ50J double-lifting mechanical driven oil drilling rig (patent No. 352466) is studied.
应用模态分析技术、振型截断法,对专利证书号第352466号的ZJ50 J双升式机械驱动石油钻机振动特性进行研究。
In order to make the optimal design of the ride performance, firstly, the modal analysis, the harmonic response analysis and the random vibration analysis are performed.
为了对载重车进行平顺性优化设计,本文首先对载重车进行了模态分析、谐响应分析、随机振动分析。
Based on the modal analysis of piezoelectric laminated plates, a FEM based inverse algorithm is presented for the time history of impact loads by piezoelectric modal response.
基于对智能层合板结构的模态分析,提出由结构的压电模态响应反演瞬态荷载时间历程的有限元方法。
On the basis of the modal analysis, the nonlinear finite element is used to analyze the dynamic response of suspension pipe bridge to cross wind excitation. The result show...
在模态分析的基础上,采用几何非线性有限元的分析方法,对悬索式管桥进行了横向风共振分析。
Based on the modal analysis theory, modal testing system is built, and the modal parameter of the Diesel Engine Main parts and the Combined Structure are obtained by using software.
本文根据模态试验理论搭建了模态试验系统,获取了柴油发动机主要零部件及其组合结构的模态参数。
Through the modal analysis, it is found that main vibration modes of floating crane structure are swing of rope-load system and vibration of boom, and the vibration frequencies are low;
通过模态分析发现,浮吊结构的振型主要表现为主钩钢丝绳-吊重系统摆动和臂架振动,振动频率都很低;
Based on the modal analysis and static stress analysis of the spindle box, it makes the mass of the spindle box optimization, the optimum parameters are attained and the design gets improved.
对箱体有限元模型进行模态和静应力分析,并以箱体质量为优化目标进行优化设计,得到最优化参数,改良了原有设计。
The finite element model was established first, then the modal analysis was processed, and accuracy of the model was verified by comparing the theoretical solution with the numerical solution.
文中首先建立了拉索的有限元模型,对该模型进行了模态分析,并通过理论解的计算验证了数值模型的准确性。
In this paper, a method that identifies the modal parameters by means of testing data is described, and then its application in the modal analysis of satellite instrument section is introduced.
本文讨论一种利用实验数据识别模态参数的方法,并介绍了它在卫星仪器舱段模态分析中的应用。
After the modal analysis of the housing of the SKR-4DL type winding machine with finite element method, the virtual instrument was applied to the on-line vibration property testing on the housing.
采用有限单元法对SKR - 4dl绕线机箱体进行模态分析后,利用虚拟仪器对箱体进行振动特性的在线检测。
The vibration of tower cranes will cause greater dynamic stress, and the modal analysis is to determine the vibration characteristics of its structure and serves as the foundation of other dynamics.
塔式起重机的振动会引起较大的动态应力,模态分析就是确定其结构的振动特性,也是其他动力学的基础。
Meanwhile, the modal analysis is used to test the detection arm's natural frequency and structural vibration modes, which provides a reference for the stability test of the bridge inspection vehicle.
同时对检测臂进行了模态分析,测出了其固有频率和结构振型,为检测车工作时的稳定性要求提供了参考。
The new method of the re-engineering VSR parameters of circle plate casting is figured out based on the modal Analysis technology.
依据振动时效机理,应用模态分析技术,提出一种盘类铸件振动时效工艺参数优化设计的新方法。
The modal analysis and parametric identification are carried out. The ARMA mode and FFT spectrum analysis are used for these objects.
最后,用ARMA时序模型及FFT谱分析对此雷达进行了实验分析。
The modal analysis and parametric identification are carried out. The ARMA mode and FFT spectrum analysis are used for these objects.
最后,用ARMA时序模型及FFT谱分析对此雷达进行了实验分析。
应用推荐