HIPS on the microstructure of composite materials were observed.
对HIPS复合材料的微观结构进行了观察。
Force modulation atomic force microscope and linear scanning system of scanning electron microscope were carried out to analyze the microstructure of composite interface.
采用力调制原子力显微镜及扫描电镜的线扫描功能对复合材料界面相精细结构进行分析。
Also, the effect of polarization treatment on microstructure and mechanical properties of LTA ceramic composite was studied.
同时研究了极化处理对LTA陶瓷复合材料组织与性能的影响。
The size and microstructure of the composite additive were tested by TEM and granularity analysis. The performances of ZnO varistor were also tested.
通过TEM和粒度测试，分析了复合添加剂的尺寸和微观结构，并对电阻器的性能进行了测试。
Bending strength and fracture toughness of the composite were studied, and the microstructure of the composite was researched by TEM techniques.
对复合材料的强度及韧性进行了研究，采用TEM技术对材料的微观结构进行了分析。
The microstructure of the Fe-based clad composite coating reinforced by in-situ particles was investigated, using laser clad FeCSiB powder added with niobium and titanium.
研究了单独添加不同含量的铌与复合添加铌、钛时激光熔覆铁基原位生成颗粒增强复合涂层的组织特点。
The microstructure of the composite powders was characterized by TEM and HREM.
复合粉的显微结构由TEM和HREM进行表征。
The results have shown that heat treatment can improve the microstructure of the Al-Si base composite manufactured under case condition.
实验结果表明，热处理能改善铸态下制得的铝硅基复合材料显微组织形态。
The changes of the impact strength and tensile strength of the composite was studied, and the microstructure of the composite was also observed by means of SEM.
研究了复合材料的冲击强度和拉伸强度的变化，用扫描电镜考察了复合材料的微观形态。
The results show that the microstructure of nano composite coatings is obviously fined and compacted because of containing nano-particles.
结果表明：纳米颗粒的加入使复合镀层组织明显细化和致密。
The influence of the microstructure on mechanical property and rupture mechanism of the composite at the room and elevated temperature were discussed.
探讨了自生复合材料凝固组织对力学性能的影响以及室温和高温复合材料的断裂机制。
The formation process and the microstructure of the composite were analyzed, and the damping properties of the composite every layer were also investigated.
分析了复合材料的形成过程，考察了复合材料的组织，研究了复合材料各层的阻尼性能。
The result showed that there was obvious gradient in the distribution of the hardness and microstructure of the composite layer.
研究结果表明，复合材料层的硬度及显微组织分布均存在明显的梯度。
A micro element method for the scale-span analysis of composite materials with microstructure is suggested.
本文探讨一种适用于复合材料宏细观间跨尺度分析的细观元方法。
The key assignment of composite micro-mechanics is to build the quantitative relation of various macro-performance and the microstructure.
复合材料细观力学的核心任务是建立复合材料宏观性能及其组分和细观结构之间的定量关系。
The microstructure and composition distribution of the iron-nickel alloy lined layer in a composite steel pipe produced by centrifugal-SHS process were investigated.
研究了铝热 -离心法制备的铁镍基合金内衬复合钢管的组织结构 ，分析了内衬层沿径向的成分分布。
The formation on Microstructure and micropore of Stratified Composite Rock are researched. The structure characteristics are analyses by means of SEM.
研究了层状复合岩石微结构及微空隙的形成，利用电镜观察分析了它们的结构特征。
The influences of glass fiber (GF) and glycol on the mechanical properties and microstructure of PA66/GF composite were studied.
研究了玻璃纤维（GF）、乙二醇对PA66/GF复合材料性能和微观结构的影响。
Microelement in the nanostructured composite permanent magnet can reform the microstructure of the permanent magnet, and increase the hard magnetic character remarkably.
纳米复合永磁材料中添加微量元素，对改善纳米复合磁体的微结构、提高硬磁性能有着显著的功效。
The effects of the mechanical ball milling on the microstructure and the performance of the composite were investigated.
研究了机械球磨对热挤压坯料组织和性能的影响。
The microstructure and properties of the composite coatings were investigated by optical microscopy, X-ray diffractometer, electron probe microanalyzer and a skimming wear machine.
利用金相显微镜、X射线衍射仪、电子探针及滑动磨损试验机，研究了合金熔覆层的显微组织及性能。
The V-EPC cast-in process was used to prepare the cast iron-based particles -containing composite. The distribution characteristics of the hardness and microstructure of the composite was studied.
采用V - E PC铸渗工艺制备铁基颗粒复合材料，并对复合材料硬度及显微组织分布特征进行了研究。
The microelement method, which establishes the immediate relation between the microstructure of material and dynamic character of structural member in composite material, is discussed.
探讨了实现复合材料细观结构与构件宏观动力特性直接关联的细观元法。
The formation on Microstructure and micropore of Stratified Composite Rock are researched. their structure characteristics are analyses by means of SEM.
研究了层状复合岩石微结构及微空隙形成，利用电镜观察分析了它们的结构特征。
The feasibility to reach a higher level in performance for composite by improving the microstructure and properties of the ITZ's.
通过改善界面来达到改善水泥基复合材料的性能这一措施是否可行。
The influence of carbon fiber content on the properties and microstructure of the C/MC composite was studied.
研究了不同纤维含量对复合材料性能的影响。
The microstructure of the NBR/AO-60 composite was characterized by DSC, SEM, XRD and DMTA, and its thermal and dynamic mechanical properties were studied.
利用差示扫描量热（DSC）、扫描电镜（SEM）、X射线衍射（XRD）、动态力学分析（DMTA）等测试手段对该复合材料的结构进行了表征，并对其动态力学性能进行了研究。
The effect of sintering temperature on mechanical properties of composite ceramics was investigated, the phase composition and microstructure of composite ceramics were analyzed by XRD, EDS and SEM.
研究烧结温度对复相陶瓷力学性能的影响，通过XRD，EDS和SEM对复相陶瓷进行元素组成和微观结构分析。
The effect of sintering temperature on mechanical properties of composite ceramics was investigated, the phase composition and microstructure of composite ceramics were analyzed by XRD, EDS and SEM.
研究烧结温度对复相陶瓷力学性能的影响，通过XRD，EDS和SEM对复相陶瓷进行元素组成和微观结构分析。
应用推荐