A method of sliding mode control based on fuzzy logic, for a class of linear uncertain system shown in phase coordinate, is presented It if derived from the principle of sliding mode control.
本文针对一类相坐标表示的线性不确定系统，根据滑模控制原理，提出一种基于模糊逻辑的滑模控制方法。
In order to obtain the phase plane of higher order nonlinear control system, a new graphic method of phase locus of phase plane for higher order nonlinear.
为得到高阶非线性系统的相平面，借助状态空间法，提出一种利用图解方法实现高阶非线性系统相轨迹的作图方法。
The theory and design method of state-feedback integral control technique for inverter are introduced particularly after analyzing the continuous and discrete models of the single-phase inverter.
在分析了单相逆变器的连续时间和离散时间模型之后，详细介绍了逆变器的增广状态反馈控制的原理和设计方法。
A two-phase optimization method of multi-period reactive power and voltage control was proposed to confine the action times of control devices.
为减少无功电压控制设备的动作次数，提出了一种多时段无功电压控制的两阶段优化方法。
A new control method of multiunit inverter is described, which determines the triggering pulse for each unit to obtain the sine wave output through multiple-phase shifting superimposition principle.
研究了多重化逆变器的一种控制方法，采用逆推的方法确定各单元的触发脉冲，通过多重移相叠加原理得到正弦波输出。
After the parameters in control law is analyzed by Phase-Plane method, other questions including optimal control, compensation of storage time are also discussed.
用相平面法对谐振参数变化规律进行了分析，讨论了参数的最佳控制、开关器件的贮存时间补偿等问题。
The stabilities of two phase motor systems can also be improved by control method.
采用控制的方法，提高二相电动机系统运行的平稳性。
A novel general multi-phase signal control method was presented based on the idea of object - (oriented) design to increase the efficiency of intersection signal control.
为提高城市道路交叉路口信号控制的效率，采用面向对象的设计思想，提出了一种新的通用多相位信号控制策略。
The method of finite state machine together with PWM circuit is given to realize the algorithms of Voltage Space Vector control and 120 electrical Angle changing phase control of DC brushless motor.
针对电机空间矢量控制和直流无刷电机120电角度换相控制算法的电路实现，采用了控制状态机与PWM发生电路相结合的方法。
It analyzes the circuit principle of the system, amplitude control method, phase control method and realization of the power factor control.
分析了系统的电路原理、幅值控制、相角控制及功率因数控制的实现方式。
With the complexity of the control of multiphase machines, a novel control method was proposed in this paper, namely six-phase motor trapezoidal wave phase current control.
针对多相电机控制模式复杂性的特点，提出一种新颖的控制方式：即六相感应电机梯形波相电流控制。
The reactivity worth of control rods at each phase of HTR 10, including initial, running in and balance phases, has been calculated by using this method.
文中给出了HTR -10各运行阶段(包括初装堆、过渡过程中期和后期、平衡换料等时期)的控制棒的反应性当量。
Choose the control circuit with the digital system based on DSP, particularly present the realization method of phase-shifted PWM and software flow chart of the control system.
控制电路采用基于DSP的数字化控制系统，详细给出了移相pwm的实现原理和控制系统的软件流程图。
From the application control of triple-phase asynchronous motor, the principle of motor soft starter based on single chip was introduced, and its design method was also given.
从三相异步电动机的应用控制出发，介绍了基于单片机控制的电机软启动器原理，给出了基于单片机控制的电机软启动器设计方法。
Discussing a kind of power topological solution and its current control method of the three-phase energy feedback type electronic power load used in aero-generator testing.
论述了一种用于航空发电机测试用的三相馈能式电子负载功率拓扑方案及其电流控制策略。
The latest three-phase clock signal control method was used to control the working state of charge pump.
电路采用了预启动和衬底电位选择结构，并利用三相时钟信号方式控制电荷泵的工作状态。
The parallel approaching method based on position signals of the line of sight (LOS) is often used in control of approaching phase of the space rendezvous and berthing.
空间交会停靠段的控制经常采用的一种方法是基于视线位置信息的平行接近法。
The simplified method has been adopted to confirm the limit frequency of limit circle of phase-lock control loop. The general expression of the capture band has been derived.
采用简化的方法确定锁相回路的极限环频率极限，推导出捕捉带的一般表达式；
The method of intelligent control applied to the orbital control of rendezvous and docking phase of spacecraft is presented in this paper.
本文介绍了将智能控制方法用于航天器交会对接段的轨道控制。
The modal control is analysed in cases of all modal controlled and limited modal controlled respectively. The time delay is compensated using method of phase shift.
模态控制分控制全部模态和控制有限模态两种情况，时滞补偿采用移相补偿。
And the method about the accomplishment of high precision phase control is introduced.
并着重叙述了高精度相控实现的方法。
For studying on dynamic reactive power optimization, a two-phase optimization method of multi-period reactive power and voltage control is proposed to confine the action times of control devices.
针对动态无功优化方法研究，本文提出了一种多时段无功电压控制的两阶段优化方法。
Based on the communication control system of metro vehicles in Shenzhen metro Phase 1, this paper presents the realization principle and the application method in actual operation of TRB mode.
基于深圳地铁一期工程地铁车辆通讯控制系统，介绍了车辆TRB模式的实现原理和TRB模式在实际运营中的应用方法。
Example testing shows the effects of FRF matrix measurement method and the control results of response magnitude and phase are all satisfied.
试验研究表明该方法的有效性，而且响应的幅值和相位控制均满足试验的要求。
This paper presents the phase plane method and the stable region method to analyze the stability of the fuzzy control systems.
本文给出了模糊控制系统稳定性分析的相平面法和稳定区间法，并对应用这两种方法设计模糊控制系统进行了讨论。
This paper proposed a novel active frequency drift with feedback based on single-phase single stage PV grid-connected generation system for the complexity of the control in traditional method.
基于单相单级光伏并网发电系统，针对传统主动式频率偏移法控制的复杂性，采用了一种新颖的带反馈的主动式频率偏移法。
Based on the circuit of three-phase voltage-type PWM rectifier, the mathematical model of three-phase voltage-type PWM rectifier is established. A voltage cycle control method is presented.
基于三相电压型PWM整流器主电路拓扑结构，建立了三相电压型PWM整流器的数学模型，提出一种基于电压环的控制方法。
The invention relates to a four-phase (8/6 pole) switch magnetic resistance motor control device of a single current sensor and a realized method thereof.
本发明涉及一种单电流传感器的四相（8/6极）开关磁阻电机控制装置及其实现 方法。
To overcome the disadvantage of higher torque ripple in Gearing Motor, one method of instantaneous torque control by optimum profiling of the phase currents is presented.
仿真结果表明，此方法对分析啮合电动机及其驱动系统在各种控制方式下的运行性能具有一定的参考价值。
To overcome the disadvantage of higher torque ripple in Gearing Motor, one method of instantaneous torque control by optimum profiling of the phase currents is presented.
仿真结果表明，此方法对分析啮合电动机及其驱动系统在各种控制方式下的运行性能具有一定的参考价值。
应用推荐