Objective: To establish the method of finite element denture model construction aided by CAD software.
目的：探讨运用CAD软件模拟制作有限元义齿模型，为简化有限元建模提供一种方法。
Based on the experiments, the process penetrating the target plate was simulated by using the method of finite element.
在实验研究的基础上，利用有限元方法模拟分析了弹头侵彻靶板的物理过程。
In this paper, vibration of oil pan with reinforcing plate is analyzed through the method of finite element and experiment mode.
本文采用有限元分析和实验模态分析方法对带有加强板的油底壳的振动进行分析。
Based on principle of conservation of energy, the thermal field of concrete component can be gotten by the method of finite element.
混凝土构件温度场的计算可以根据能量守恒原理，采用有限元方法进行求解。
Moreover, based on the method of finite element analysis and the general software, the failure behavior of high density syntactic foams is investigated.
还利用计算机和通用软件对高密度复合泡沫塑料进行了有限元分析，研究了高密度复合泡沫塑料的失效行为。
At last, the several problems in forecasting the mast structure by the method of finite element that should be studied further have been discussed also.
最后还提出了桅杆结构振动预报今后需要进一步研究的几个问题。
The induced magnetic potential of an infinite long irony cylinder under the action of an external magnetic field is studied by the method of finite element.
本文研究了一个无限长铁质圆柱体在地磁场作用下的感应磁位问题。
The main contents of this paper include:(1) With the method of finite element numerical simulation, forming process of big caliber flange (JB/T4700-2000) was analyzed.
采用有限元数值分析方法，对高颈对焊法兰（国标JB/T4700-2000）的工艺过程进行了数值模拟分析。
Combining with an engineering instance, basing on the current specifications and a certain construction, the transfer girder structure is analyzed by the method of finite element.
根据现有规范规定，结合工程实例，本文提出了钢骨转换梁与上部剪力墙共同作用的结构的截面极限承载力的计算方法；
In this paper, for solving the parameter problem of two dimensional wave equation, the method of Finite Element and the Pulse Spectrum Technique, i. e. the iterative process are used.
本文针对求解二维波动方程的参数问题，利用有限元方法把波动方程反问题转化为有限元反问题，并利用脉冲谱技术，即一个迭代过程进行求解。
Let the mechanical dynamics be combined with the method of finite element analysis to establish the simulation method of vibration measurement of dynamics balancing test-bed of mechanism.
将机械动力学与有限元分析方法相结合，建立了机构动平衡实验台振动测量的仿真方法。
Using the method of finite element analysis and theory of mechanics of elasticity, strain profiles of soft tissues under different circumstance were calculated and presented in this paper.
本文利用有限元分析的方法，用弹性力学的理论计算得到软组织在不同情况下的应变分布。
By means of the method of finite element analysis, and simulating the actual working status of the press, the stress and deformation value of each hinge beam part of the press were obtained.
借助有限元分析方法，模拟压机的实际工作状态，获得了压机铰链梁各零件的应力和变形值。
After a cell is broken, the stress adjustments of the other cells in the system are obtained by finite element method using the broken cell as inner boundary.
当单元破裂后，将破裂单元作为内部边界，利用有限元方法计算由于这个单元破裂对系统其他单元造成的应力调整。
By using finite element method, the deformations of flat membrane mirror have been calculated.
运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。
The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions.
分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析；
The common hypotheses of the shell structure aren't alterative in the new finite element method and it finishes the solution through the integral of the different laminas.
新单元的计算方法不改变壳体结构的一般假设条件，利用厚度方向分段积分来完成问题的求解，并对层合截锥壳进行计算。
We analyze the optimum result of Xiamen control airspace and put forward optimal algorithm based on the Finite Element method.
在对厦门管制区的优化结果进行分析的基础上，提出了基于有限元的优化方法。
The results showed that this technique could significantly save CPU time and data preparations in the condition of having a similar accuracy compared with the finite element method.
计算表明，这种计算方法与有限元相比，在保证具有相似精度的条件下能够节省CPU时间和数据处理工作量。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
The response of dual laterolog in tilted anisotropic sedimentary formation was simulated with the three-dimensional finite element method.
利用三维有限元法，模拟了电性各向异性倾斜沉积岩层的双侧向测井响应。
The effects of matching materials on the brake temperature of braker were investigated by using the finite element method to simulate the temperature transient process of disc brake.
采用有限元法模拟盘式制动器制动过程瞬态温度场，研究了材料匹配性对制动器温度场的影响。
The tank structure of mining flameproof transformer is analyzed by the three-dimensional finite element method. The optimal design of tank has been carried out.
采用三维有限元法对矿用隔爆型变压器箱体结构进行了分析，完成了箱体结构的优化设计。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
应用推荐