Next the design process of this power supply, which include the main circuit design, control and auxiliary circuit design, are introduced in detail.
接着详细介绍了电力操作电源的设计过程，包括主电路的设计以及控制电路的设计。
It Includes the doubly-fed machine integrated control experimental system control cabinet design, the main circuit design and control circuit design.
包括双馈电机综合控制实验系统的控制柜设计，主电路设计及控制电路设计。
In the plan of design, the fourth generation of IPM is used as the main half-bridge circuit and TMS320LF240X DSP with good performance and strong function is used as a controller.
在设计方案中，采用第四代IPM作半桥主电路，以性能好、功能强的数字信号处理器TMS320 LF 240 X DSP为控制器。
This paper describes the main function, technology and test of L82C37A programmable DMA controller. It also shortly introduces basic circuit and design method.
叙述了L82C37A可编程DMA控制器的主要功能、制造工艺和测试，并对其基本电路及设计方法进行了简要介绍。
There has been discussed the main principle and design method of two newly tested circuits - oil-addition circuit and safe-blocked circuit as well.
文中还着重阐述了两种新试验的回路—补油回路和安全闭锁回路的设计指导思想及具体设计方法。
The principle and main circuit design ideas are given for the mobile pulse output module tester.
介绍了便携式脉冲输出模块测试仪的原理和主要电路设计思想。
According to the determined main circuit and the corresponding equivalent circuit of DVR, the compensation characteristic in steady state and the parameter design are analyzed.
根据给出的DVR主回路结构及其等值电路，对稳态时的补偿特性和参数设计进行了分析。
The design of main power sources structure, the control circuit for welding tractor and wire feeder, SCM control circuit and software for welding process are introduced in detail.
对该焊机的主电源结构、小车行走控制电路、送丝电路、单片机控制电路以及焊接过程控制软件等的设计作了较详细的介绍。
This design realizes the main function of UART. The circuit is simple and works stably and credibly. It can be embeded into various communication systems flexibly.
该设计不仅实现了异步通讯的主要功能，而且电路简单，工作稳定、可靠，可以将其灵活地嵌入到各个通信系统中。
Then, through analysis of working principle of the controller, comparison between two current hysteretic control, strategies and design of main circuit parameters are given.
接着，本文介绍了控制器的工作原理，给出了两种斩波控制方式的比较、控制器主电路参数设计和驱动电路设计。
The main reasons were due to the defect in the design of safety valve secondary circuit and the overlap of the service rating and the setting for safety valve popping and reseating.
主要原因是锅炉安全阀二次保护回路设计有缺陷，再加上安全阀起跳和回座的整定值与运行额定值相重叠造成的。
This paper introduces the design of high power supersonic inverting power supply, including main circuit, controlling circuit, driving and protecting circuits, and gives experimental results.
主要介绍一种大功率超声波逆变电源装置的主电路、控制电路、驱动与保护电路的设计，并给出实验结果。
This article explains the design idea and basic working principle and the main electric circuit and the principle of its work are also given.
文章讲解了检测系统的设计思想和基本工作原理，给出了控制系统的基本硬件电路图。
Because the main discharge circuit has serious requirement for circuit inductance, when select main components' parameters and conduct architecture design, this factor must be considered.
主放电回路对回路电感有很高的要求，所以在回路主要部件的参数选取及结构设计当中考虑了这一因素；
The third chapter mainly introduces the hardware design of soft starter, including the main circuit, control circuit, drive circuit, and protect circuit and auxiliary switched power design.
第三章详细介绍了软起动控制器的硬件设计，包括主电路、控制电路、驱动保护回路和辅助开关电源电路的分析和设计。
At the present This thesis has the system's scheme of hardware main circuit diagram and software design.
在本次论文中，给出了控制系统的主电路图及软件设计。
The main process includes following: analysis of device model, design mixing circuit, impedance matching.
主要步骤包括：器件的射频等效模型分析、混频电路设计与优化、混频电路的阻抗匹配。
The circuit design and structure of single phase bridge voltage inverter are presented in detail. The main experimental waveforms are given.
对单相桥式电压型变频器的线路设计及结构作了较为详细的介绍，给出了主要实验波形。
The main parts of this dissertation are the principle of ultrasonic detection, circuit design of the instrument and design of the software.
论文主要研究了以下几个方面的问题：超声测距的原理、仪器的电路设计和软件设计。
The paper introduces the design of the main circuit and protection circuits of 48V/500A all-digital AC speed regulation controller.
本文介绍48V/500A全数字交流调速控制器主电路及其保护电路的设计。
Hardware design of the main parts of the Bluetooth module is divided the application circuit power module, RS232 level translation module, Bluetooth module.
硬件部分的设计主要是对蓝牙模块应用电路的电源模块、RS232电平转换模块、蓝牙模块分别进行分析设计。
The principle and construction of the transducer are briefly presented and the working principle, design of the system as well as the main generator and detector circuit are introduced in the paper.
文中简要叙述了换能器的工作原理与构成，给出了测量系统的设计与工作流程，并对主要的超声波发射与接收电路作了说明。
This paper focuses on the main circuit, the design method of the drive and protective circuit of IGBT.
重点介绍了其主电路以及IGBT的驱动保护电路的设计方法。
This paper carries out the analysis of dynamic characteristics for hydraulic circuit of the brake, and puts forward the criterion of structure design and main parameters in hydraulic system.
本文对制动器液压油路进行了动态特性分析，并提出液压系统主要参数和结构设计的准则。
This paper presents the system design, control tactic and main circuit of control system for hot-dip galvanizing simulator.
主要介绍了热浸镀模拟试验机的系统设计、控制策略和重要回路。
Have carried on the detailed parameter design to the phase-shifted Full-Bridge soft switching power supply main circuit and the control circuit.
对移相全桥软开关电源主电路和控制电路进行了详细的参数设计。
The design of the flower mainly through the main part of the circuit design imitation, inherent to the basic functions of the flower.
本设计主要是通过对电子琴主体部分的电路进行模仿设计，达到电子琴固有的基本功能。
This paper shows the main subsystems of the digital track circuit design of sending subsystem.
本文给出了数字轨道电路中主要系统——发送系统的设计方案。
This paper shows the main subsystems of the digital track circuit design of sending subsystem.
本文给出了数字轨道电路中主要系统——发送系统的设计方案。
应用推荐