We know that the hardware circuit design clock signal is very important.
我们知道，在硬件电路设计中时钟信号时非常重要的。
We know that the hardware circuit design clock signal is the most important one of the signals.
我们知道，在硬件电路设计中时钟信号是最重要的信号之一。
The paper discusses the hardware circuit design in detail, and also explains the software program flow chart.
详细阐述了系统的硬件电路设计，并给出了软件流程图。
The hardware circuit design, means of communication system and software design thought is illustrated separately.
分别说明了系统的硬件电路设计、系统的通讯方式和软件设计思想。
Secondly this paper detailed discussed the hardware circuit design and implementation of locomotive voice recorder.
其次，论文分析研究了车载语音记录装置硬件电路的设计和实现。
During the hardware circuit design, the signal conditioning circuit and the DAQ card is important to whole system's accuracy.
在硬件电路设计中，信号调理电路和数据采集卡是整个系统测量精度的关键环节。
In this paper, two aspects of design: on the one hand, the hardware circuit design, on the other hand, the system design process.
本文主要包括两个方面的设计：一方面是硬件电路的设计，另一方面是系统程序的设计。
The steady heat characteristic of XLPE cable, the hardware circuit design of current carrying capability and system software design are studied.
对XLPE电缆稳态运行下发热特性、载流能力预测硬件系统及软件系统设计等问题进行了研究。
In this paper, the hardware circuit design of USB interface based on PDIUSBD12 chip is introduced, meanwhile implement of USB firmware program...
文中介绍了基于PDIU S - BD 12芯片的USB接口的硬件电路设计，并介绍了USB固件编程的实现。
This article introduced the hardware circuit design, mechanical structure design and system software design of the intelligent vehicle system in detail.
本文详细介绍了智能车系统的硬件电路设计，机械结构设计和系统软件设计。
Many of digital circuit technologies are adopted in the hardware circuit design, such as DSP technology, DDS technology, digital potentiometer technology and so on.
在装置硬件电路设计上，大量采用了数字电路技术，如DSP技术、DDS技术、数字电位器技术等。
Third chapter introduced in detail about USES the ultrasonic wave method to carry on the three dimensional human body coordinates survey the hardware circuit design.
第三章详细介绍了采用超声波方法进行三维人体坐标测量的硬件电路设计。
This article presents a design of permanent magnetic brushless DC motor control system and mainly involves the hardware circuit design of speed closed loop and power module drive.
介绍了一种永磁无刷直流电机控制系统的设计方案，主要涉及速度闭环和功率模块驱动的硬件电路设计；并通过实验证明该设计可直接用于小型无刷直流电机的控制。
In the paper, the hardware circuit design of a DSP-based Brushless DC Motor Controller is given, which includes a current loop, a speed position loop, and IPM (Intelligent Power model) driver.
本文提出了一种基于DSP的直流无刷电机控制器的硬件电路，包括电流环、速度位置环和IPM(智能功率模块)驱动的硬件电路设计。
The design of hardware circuit is explicated and the diagram of program is offered.
详细描述了硬件电路的设计，并给出了软件程序框图。
The system framework, hardware circuit design and software design of digital flowmeter are presented in the paper.
本文介绍了数字式流量计的系统总体结构、系统的硬件电路设计和系统的软件设计。
The paper also design some specific hardware interface circuit to explain its word principle. And also explained program chart of dyeing machine blow head in the application.
本文还设计具体的硬件接口电路，说明其工作原理，给出应用于染色机喷头控制系统的程序流程。
Deep research into DSP technology and computer bus technology, design the hardware and circuit interface of PC and DSP.
深入探讨了DSP技术和计算机的总线接口技术，设计了PC及DSP的硬件电路接口。
During the design of hardware circuits and printed circuit board, we take a series of measures to design the reliability of the system.
在硬件电路设计和印刷电路板设计过程中，采取一系列措施对系统进行了可靠性设计。
On the basis of discussing the reliability theory by total distributed control systems, it puts forward the reliability design of series hardware circuit.
在简要论述集散型控制系统可靠性理论的基础上，提出放大器硬件电路的可靠性设计。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
The hardware and software design methods of the counter interface circuit were put forward. And the circuit debugging has been carried on.
提出了计数接口电路的硬件和软件设计方法，并进行了电路调试。
In this paper, the specific hardware and software design, a circuit board and components of the welding, the debugging process.
文中介绍了具体的软硬件设计，进行了电路板和元器件的焊接、程序的调试。
Hardware include the whole programming of circuit, design, anti-jamming circuit, principal chart of circuit, the circuit board of PCB, jointing the circuit, debugging and assemble the system.
硬件设计包括电路的系统规划、设计、抗干扰电路的设计、原理图的绘制、PC B电路板的制作、电路的焊接、电路的调试以及整个系统的组装。
Lastly, the hardware circuit, VHDL program design and debugging methods based on FPGA are discussed.
最后对基于现场可编程门阵列(FPGA)的硬件电路、VHDL语言程序设计及调试方法进行了讨论。
Lastly, the hardware circuit, VHDL program design and debugging methods based on FPGA are discussed.
最后对基于现场可编程门阵列(FPGA)的硬件电路、VHDL语言程序设计及调试方法进行了讨论。
应用推荐