In the base of the flow stress model of AZ31, finite element analysis software DEFORM was used to research the drawing of the notebook PC case with magnesium alloy AZ31 sheet.
在材料模型的基础上，利用DEFORM有限元软件对AZ 31变形镁合金板温拉深笔记本外壳实验做了模拟。
The turbulent flow in a hydrocyclone is predicted numerically using a Reynolds stress model, and the numerical results agree well with experimental data.
本文采用雷诺应力模型计算了水力旋流器的水相湍流流场，计算结果与实验数据吻合很好。
Based on the plastic flow theory of soils, an elastoplastic constitutive model for describing the stress-strain behavior of the saturated sands under the action of monotonic loading is developed.
利用土体的塑性流动理论，提出了用于描述饱和砂土在单调荷载作用下的应力—应变反应性质的弹塑性本构模型。
True strain, strain rates and temperatures were input parameters of the model, while flow stress was the only output parameter.
在该模型中，等效应变、等效应变速率和变形温度是模型的输入向量，输出向量是材料的流动应力。
Considering gravity, interfacial shear stress, surface tension and interfacial thermal resistance, the analysis model for annular flow condensation heat transfer in microtube was presented.
本文提出了微圆管内环状流凝结换热的分析模型，考虑了重力、汽液界面剪切力、表面张力以及界面凝结热阻的作用。
The algebraic stress model has been used in this paper to calculate the turbulent flow with wavelike free surface.
本文将代数应力模型推广应用于具有起伏表面的紊流数值计算。
Based on the Reynolds stress model CFD numerical simulation method, both flow mechanism and flow characteristics of dispersed oil phase in oil-water separation hydrocyclone were studied.
采用雷诺应力模型CFD数值模拟方法，对油水分离器内的流动机理和分散油相的流动特点及处理方法进行研究。
Further investigate the flow mechanism of the liquid-liquid hydrocyclone, and the oil and water phases flow field in hydrocyclone for oil water separation is simulated using LRR stress model.
深入研究了液-液水力旋流器的流动机理，并采用LRR应力模型对油水分离旋流器的油水两相流场进行了数值模拟。
Based on consideration of stress sensitivity of coal seam permeability, the single-phase flow rule of coal-bed gas in coal and cleats is studied by using non-equilibrium adsorption model.
在考虑煤层渗透率应力敏感性的基础上，采用非平衡态吸附模型，研究单相煤层气在煤体和割理中的流动规律。
A three-dimensional numerical model with free water surface and wall shear stress was used to analyze the water flow affected by piers.
该文采用具有自由水面和河床切应力计算的三维数学模型分析了桥墩群对河道水流的影响。
Based on the Reynolds Stress Model, the three-dimensional flow field was numerically simulated using the Reynolds averaged N-S system equations.
从雷诺应力模型出发，通过求解雷诺平均N - S方程组获得三维湍流流场的数值解。
The Reynolds stress model was used to simulate the flow field during the filtration and back pulse process in the ceramic filter vessel containing three filters.
用雷诺应力模型模拟了含有三根滤管的过滤器内过滤和反吹的整个过程的流场。
The space truss model theory argues that the stress flow transfers along with the truss composed of piles and column.
空间桁架模型理论认为，承台内部力流是沿桩柱间的空间桁架传递的。
Based on the modified nonlinear algebraic stress model for turbulent flow, a closed non-linear multiple time scale model is established.
在双时间尺度紊流模型的基础上，对线性涡粘性模型进行了修正，建立了封闭的非线性双时间尺度紊流模型。
In this paper, we attempt to study the wall shear stress in the flow field of a t bifurcation section of an artery model by using an electrochemical measuring technique.
应用电化学方法，对动脉模型T形分叉部位流场壁面剪应力进行测试研究。
The flow field of dynamic hydrocyclone was simulated using Reynolds Stress Model in the paper.
本文采用雷诺应力模型对油料储运设备中动态旋流器内速度场进行数值模拟。
Steel flow stress model is it calculate for foundation line material rolling strength can the computer software of the parameter to work out with one;
以70号钢流动应力模型为基础编制了计算线材轧制力能参数的计算机软件；
The gas flow fields were simulated by a Reynold's stress Transport Model(RSTM) and the stochastic tracking approach was used for simulating the trajectories of particles in a turbulent current.
在数值预测时，气相场采用雷诺应力输运模型，应用随机轨道模型来模拟湍流流场中颗粒的运动轨迹。
Reynolds stress model is used to serve as a turbulent flow model with the object of study being the gas-solid two-phase flow in a U-shaped separator.
湍流模型采用雷诺应力模型，研究对象为U型分离器内的气-固两相流动。
Setting up rock stress of layers and coupling porous media flow model and new method of solving of porous media flow for the first time in this paper.
文中首次建立了储层岩石应力与渗流的耦合渗流模型及新的求解方法；
The steady state term is the steady flow stress model of metal materials in the semi-hot forming process, and it is a model related to the Z parameter;
稳态项是金属材料在亚热变形过程中的稳态流变应力模型，而修正项是指流变应力随应变的变化而变化的部分。
And ANN model could predict the corresponding flow stress at different strain, but constitutive equations could only predict the peak stress depending on different strain rates and temperatures.
神经网络可以预测不同应变下的相应的流变应力，但是本构方程只可以根据不同的应变速率和温度来预测峰值应力。
And ANN model could predict the corresponding flow stress at different strain, but constitutive equations could only predict the peak stress depending on different strain rates and temperatures.
神经网络可以预测不同应变下的相应的流变应力，但是本构方程只可以根据不同的应变速率和温度来预测峰值应力。
应用推荐