建立有限元模型。
On this basis, the finite model of the whole gun has been established.
在此基础上，建立了火炮整体的有限元模型。
Through the establishment of the finite model, receive the stress distribution in different parts of eggshell.
通过建立鸡蛋的有限元模型，得到加载后鸡蛋不同部位的应力分布云图。
Because of considering the influence of ground surface, the finite model can be used for analyzing the long period heat transfer process.
而有限长的传热模型由于考虑了地面作为传热边界对地下传热过程的影响，能够用来分析长时间的传热分析。
The finite model of injection molded parts with microstructure region considering latent heat can approximatively forecast the cavity temperature.
采用考虑结晶潜热的微结构件注射成型有限元模型能较准确地预测制品内部温度场分布。
In this thesis, by using equivalent principle, we can reasonable predigest the finite model of CINCINNATI robot for the software "ANSYS" operation and solution.
本文通过等效原则对CINCINNATI机器人整机的有限元模型进行合理的少量的简化，有利于ANSYS软件的运算和求解。
The finite model of the derrick and drilling platform connecting unit is built and the natural vibration frequency and the corresponding vibration mode of it are given here.
建立了该钻机井架与钻台结合体固有振动特性理论分析的有限元模型并给出了其固有振动频率结果和相应的主振型。
In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.
首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。
The property of the near field subwavelength imaging in a metal thin-film structure is investigated using finite difference time domain method based on Drude model.
采用基于等离子体物理模型的时域有限差分方法模拟了金属薄膜近场成像特性；采用薄膜传输矩阵方法计算了金属薄膜对倏逝波分量的放大作用。
And again, the reason this simple model works is because although a real liquid, certainly a pure liquid has a finite entropy, a substantial amount of disorder, that's present, that kind of disorder.
并且又一次，这个简单的模型，起作用的原因是，虽然真正的液体，当然纯液体有有限的熵，存在大量的无序状态，这种无序。
The idea of using of model programs and state space exploration is a natural extension of finite state machine based techniques that fits well with black-box testing of software.
使用模型编程与状态间隔探测的思想对于以软件黑盒测试技术为基础的有限状态机是一种自然的扩充。
Conclusion: Cable and gap elements are reasonable boundary conditions of the finite element model of mandible, which will improve the similarity of the model.
结论：采用柔索约束、间隙元作为下颌骨及髁突的边界条件，可提高模型的相似性，为下颌骨的受力分析奠定基础。
The best way to prove it to yourself is to make a simple finite element model and check out the results.
为你自己证明这点的最好方法是生成一个简单的有限元模型，并检查输出结果。
It is significant to study the contact area in rolling process and simplify model of finite element.
对研究花键冷滚压成形过程中的接触面积和有限元模型的简化具有重要的意义。
Using ABAQUS to build the finite element model of reinforced concrete hollow slab and rubber bearing, simulate contact effect between them by set contact property.
运用有限元软件ABAQUS建立钢筋混凝土桥面板与橡胶支座的有限元模型，设置接触属性来模拟二者之间的接触作用。
The finite element model of the oil films was established. The influence of oil films on the reactions of marine shaft system was analyzed.
建立了滑动轴承油膜的有限元模型，分析了油膜对船舶轴系轴承反力的影响。
Upbuild the incorporate finite element model for the engine, engine install and aircraft stracture, May entirely seeing about the effect for dynamical optimize design of engine install stracture.
建立发动机、发动机安装结构、机体一体化的有限元模型，可全面考察发动机安装结构动力优化设计的成效。
Through the comparison of modal shape of floating caliper brake system elements by finite element modal analysis and experiment modal analysis, the validity of finite element model is confirmed.
通过对比浮钳式盘式制动器各零部件的有限元模态分析和试验模态分析所得出的模态阵型，验证了有限元模型的正确性。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
Aiming at the randomicity of concrete crack, the author adopt the randomicity finite element model and Monte-Carlomethod to simulate the randomicity of material character and crack distribution.
针对材料性能的随机性和裂缝分布的随机性，引入了随机性模型，采用蒙特卡罗法来模拟其随机性。
In this dissertation, nonlinear finite element model establishment method of the guyed mast is studied.
本文研究了桅杆结构非线性有限元模型的建立方法。
CONCLUSION: the finite element model of artificial disc replacement can be established by CT scanning, digital processor and computer aided design, and used for further study on spinal biomechanics.
结论：通过CT断层扫描、图像数字化处理及计算机辅助设计等方法，可以建立腰椎人工椎间盘置换的有限元模型，用于脊柱生物力学的进一步研究。
The finite element model was established based on the small punch creep test of SS304 steel specimen in the condition of constant temperature and different loads.
对304不锈钢进行了恒定温度下多种载荷的小冲孔蠕变试验，在此基础上建立了304不锈钢小冲孔蠕变试样的有限元模型。
By analysis of the middle section stress of the hollow slab in the two situations of consider contact and not consider contact, verified the accuracy of contact finite element model in that situation.
通过考虑接触与不考虑接触两种情况时桥面板跨中截面的受力分析，验证该问题中接触有限元模型的正确性。
The effect of the initial geometrical imperfection on the buckling critical pressure and buckling model has been taken into account in the finite element simulation.
在有限元模拟中，分析了初始几何缺陷对壳体起皱的临界压力和起皱形态的影响。
This paper describes a method based on the generalized principle of virtual work to derive the hybrid model of finite element. An assumed-strain hybrid model was obtained.
本文提出用广义虚功原理的方法建立有限元的杂交模型，并具体导出了一种杂交应变模型。
It is analyzed for the influence of oil films on the reactions of Marine shaft system by establishing the finite element model of the oil films.
建立了滑动轴承油膜的有限元模型，分析了油膜对船舶轴系轴承反力的影响。
On the basis of this, the integrated finite element model of motorcycle has been established including frame, engine, suspension, wheel, rider and oil box etc.
并基于此，建立整车的有限元模型，包括车架、发动机、悬架、轮胎、乘员、油箱等。
On the basis of this, the integrated finite element model of motorcycle has been established including frame, engine, suspension, wheel, rider and oil box etc.
并基于此，建立整车的有限元模型，包括车架、发动机、悬架、轮胎、乘员、油箱等。
应用推荐