The finite method of EHLwas used to analyze the properties of sector pad and circular pad thrust bearing separately on the condition of centre pivoted.
应用有限元程序分别对圆形瓦和扇形瓦推力轴承在中心支承条件下的性能进行了计算。
Using the finite method to solve the problem of temperature distribution in the wall of periodic kiln wall and using the language c, the software system of figure emulation is developed in this paper.
本文利用有限差分法求解间歇窑窑墙中的温度分布，并用C语言设计了窑墙温度场图形仿真软件。
The property of the near field subwavelength imaging in a metal thin-film structure is investigated using finite difference time domain method based on Drude model.
采用基于等离子体物理模型的时域有限差分方法模拟了金属薄膜近场成像特性；采用薄膜传输矩阵方法计算了金属薄膜对倏逝波分量的放大作用。
We analyze the optimum result of Xiamen control airspace and put forward optimal algorithm based on the Finite Element method.
在对厦门管制区的优化结果进行分析的基础上，提出了基于有限元的优化方法。
The time domain finite difference and the finite element method are more convenient.
有限差分法和有限单元法在时间域里更为方便。
In solving the mathematical model, two time-saving and effective numerical methods have been tested and compared with the finite difference method commonly used.
对动态数学校型的数值求解，试验了两种颇为有效的方法，并将这两种方法和常用的有限差分方法作了比较。
For the plates with finite dimensions, the finite element method is used to obtain the stress distribution and stress concentration around the ovaloid opening.
对于有限尺寸板内开孔的情形，文中用有限单元法来分析腰圆形孔口的应力分布和应力集中。
This provides a good grounding in computer modelling and in the finite element method, in particular.
这提供了一个计算机模型，在良好的基础，特别是在有限元方法。
After a cell is broken, the stress adjustments of the other cells in the system are obtained by finite element method using the broken cell as inner boundary.
当单元破裂后，将破裂单元作为内部边界，利用有限元方法计算由于这个单元破裂对系统其他单元造成的应力调整。
It compares the rigid limit equilibrium method with the finite element method.
比较了有限元法和刚体极限平衡法的优缺点。
By using finite element method, the deformations of flat membrane mirror have been calculated.
运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。
The effects of matching materials on the brake temperature of braker were investigated by using the finite element method to simulate the temperature transient process of disc brake.
采用有限元法模拟盘式制动器制动过程瞬态温度场，研究了材料匹配性对制动器温度场的影响。
The results of the precise integration method agree well with the theoretical solution and have higher precision than those of the finite difference method.
数值算例表明，用精细积分法得到的解与精确解十分吻合，比有限差分法具有更高的精度。
This dissertation successfully used cluster computing for solving large-scale linear algebraic equations problems when the finite element method (FEM) is applied in electrical prospecting.
本文成功地将机群计算应用到解决在电法勘探中使用有限元方法（FEM）时产生的大规模线性方程组问题。
In this paper, the polynomial is adopted as basic function of finite strip method, the relative formulas have been derived.
本文采用多项式作有限条位移函数中的基本函数，并推导出了相应的关系式。
On the base of introducing the principle of the magnetic flux leakage (MFL) detection, the finite element method based on ANSYS used to simulate and analyze the MFL signal is presented.
在介绍漏磁检测原理的基础上，详细论述了利用有限元法分析缺陷信号的方法以及利用ANSYS对漏磁信号的仿真过程和仿真结果，并对结果进行分析。
The common hypotheses of the shell structure aren't alterative in the new finite element method and it finishes the solution through the integral of the different laminas.
新单元的计算方法不改变壳体结构的一般假设条件，利用厚度方向分段积分来完成问题的求解，并对层合截锥壳进行计算。
The results showed that this technique could significantly save CPU time and data preparations in the condition of having a similar accuracy compared with the finite element method.
计算表明，这种计算方法与有限元相比，在保证具有相似精度的条件下能够节省CPU时间和数据处理工作量。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
The response of dual laterolog in tilted anisotropic sedimentary formation was simulated with the three-dimensional finite element method.
利用三维有限元法，模拟了电性各向异性倾斜沉积岩层的双侧向测井响应。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
The finite element method is used to analyze the relationship between strength and stress of the particle reinforced iron matrix composites and the shapes, sizes and fraction volume of the particles.
采用有限元方法分析了颗粒增强铁基复合材料强度和应力与颗粒形状、尺寸以及体积分数的关系。
The tank structure of mining flameproof transformer is analyzed by the three-dimensional finite element method. The optimal design of tank has been carried out.
采用三维有限元法对矿用隔爆型变压器箱体结构进行了分析，完成了箱体结构的优化设计。
Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
在此基础上应用有限元法的通用软件ANSYS，对大型水轮发电机定子温度场进行分析与计算，绘制了相应温度场图。
In numerical computation by the finite element method it is also convenient to use the loading-unloading criteria and the constitutive equations formulated in strain space.
在有限元方法的数值计算中使用应变空间表述的加-卸载准则和本构方程也是很方便的。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
应用推荐