If using the finite element software analysis, we can solve the problem better.
如果采用有限元软件进行分析，则可以较好的解决问题。
A new model of flow in a twin rotor continuous mixer was analyzed with the finite element software ANSYS.
文中利用有限元软件ANSYS对S形转子连续混炼机的流场进行了模拟分析。
The thermal module of the finite element software ANSYS is used to analyze the heat transfer of the gearbox.
该研究使用ANSYS有限元软件的热分析模块进行变速箱热传导分析计算。
The state of steel arch centering under construction loads is analyzed by the finite element software MIDAS.
利用有限元软件MIDAS，对钢拱架施工的受力状态进行了数值分析。
The sustainability of perforating casing with screw holding is analysed by using the finite element software ANSYS.
文章利用ANSYS有限元分析软件，对螺旋布孔射孔套管的承载能力进行了分析。
A finite elenent analysis of telescopic arm of TR1000 rock drill is made by using the finite element software Ansys8.
0有限元分析软件为工具，对TR1000型凿岩机伸缩臂结构进行有限元分析，运用节点自由度耦合技术来模拟各节臂的连接。
The bend shapes of rail during cooling at air after hot rolling were simulated using the finite element software ANSYS.
应用有限元软件A NSYS模拟了热轧钢轨空冷过程的弯曲变形规律。
After the formulation of appropriate criteria takes place the optimization of the system with the Finite Element Software ANSYS.
在列出相应的准则公式后，采用有限元程序ANSYS将系统进行优化。
While we can quickly, accurately and intuitively get the global stress and strain distribution about the structure by the finite element software.
而应用有限元软件进行计算能够快速、准确、直观的得到结构上各部位的应力、应变等参数的分布情况。
The stress and temperature distribution were computed by the finite element software ANSYS for the two instances of steady operation and starting-up.
通过有限元软件A NSYS，分别计算了启动和稳态操作情况下， 加氢反应器筒体的温度分布和应力分布。
Exploring the law of tress variety of bridge's key parts in construction process, and the value of the finite element software in engineering construction.
探讨桥梁关键部位在施工过程中的应力变化规律，以及有限元分析软件在工程建设中的应用价值。
In this paper, the static analysis of Hydroplan of hydropower station engineering of Xianrendong is performed by using the finite element software of ANSYS.
本论文通过有限元分析软件ANSYS对贵州省纳雍县仙人洞水电站的厂房工程进行了结构静力分析。
Parameterized design of the die is realized in the finite element software, which shortens the die designing time and increases the reliability of the design.
在有限元软件内部实现了模具的参数化设计，既缩短了模具设计时间，又提高了模具设计可靠性。
To verify the results, a 2D finite-element model of the bridge is developed and its modal parameters are calculated by using the finite element software ANSYS.
为了验证测试结果，文中对大桥用二维有限元模型建模，用有限元软件ANSYS建立了该桥的二维有限元模型，并计算得到了桥的模态参数。
The thermal analysis, thermal-structure coupling analysis and transient thermal analysis are applied in nine common materials by using the finite element software ANSYS.
应用有限元软件ANSYS对常用九种材料进行了热稳定性和抗振性分析。
In this paper, a 3-d parametric finite element model for a pressurized cylinder with a long rectangular tube joint was established using the finite element software FEPG.
在本论文中，运用有限元软件FEPG建立了带长矩形接管受压圆筒体的三维参数化有限元模型。
The numerical simulation and analysis of shear resistance behavior of two-side connected steel-plate shear wall (SPSW) was carried out by the finite element software ANSYS.
采用ANSYS有限元程序对两边连接钢板剪力墙进行数值模拟分析。
Because hinges need linear deformation, using the finite element software ANSYS to study the performance of the hinges, then discusses the hinges parameters' impact on linearity.
因为铰链需要线性变形，因此利用有限元分析软件ANSYS对柔性铰链进行系统的研究，讨论铰链的各个参数对其线性性能的影响。
Based on the detailed analysis of the structural character, the mechanics characteristic of a pressure-type anchor is simulated and analyzed by using the finite element software.
在详细分析压力集中型预应力锚索结构特征基础上，利用有限元软件进行模拟和分析该种锚索受力特征。
The solidification model of twin-roller strip casting is established. The solidification process of strip casting is mathematically simulated by using the finite element software.
建立双辊薄带连铸凝固数学模型，并利用有限元软件对薄带连铸凝固过程进行数值模拟。
For comparison, the finite element software ANSYS is used for the discharge and stress calculation of pulsed magnets. The result obtained from ANSYS agrees well with that from PMDS.
利用ansys计算脉冲强磁体的放电过程和应力分布，并把计算结果与PMDS的结果相比较，发现二者结果吻合很好。
The stator's characteristics of vibration and input impedance were analyzed by using the finite element software ANSYS. A new decoupling method between the two vibrators was presented.
对电机的运行机理进行了分析，并利用有限元软件ANSYS分析了电机定子的振动特性和阻抗特性，同时提出了一种振子间解耦的方法。
The main work of this paper is as follows: (1) Highlights the damaged concrete plasticity model of the finite element software ABAQUS on the basis of concrete damage in the existing theory.
本文的主要工作如下：(1)在现有混凝土损伤理论的基础上重点介绍了介绍ABAQUS有限元软件的混凝土损伤塑性模型。
Furthermore, the soldering process of PCBA in the whole infrared reflow soldering stove is modeled by the finite element software, ANSYS, and is simulated by the three-dimensional modelling.
此外，利用有限元ansys软件对PC B组件在整个红外再流焊炉中的焊接过程建立了实体模型，进行了PC B组件再流焊全过程的三维动态模拟和仿真。
The thermal field and stress field were calculated for the HP and IP cylinder of 600 MW supercritical steam turbine in one integral star-stop process with the finite element software of ANSYS.
利用ANSYS有限元软件对超临界600MW机组的高、中压缸的一次完整启停过程进行温度场和应力场计算。
With the finite element software, the influence on the structure is calculated of metro excavation under large span obliquely intersected framed underpass bridge constructed with jacking method.
借助大型有限元分析软件，对大跨度斜交顶进框架式地道桥底板下开挖地铁对地道桥结构的影响进行较深入的探讨。
With the finite element software, the influence on the structure is calculated of metro excavation under large span obliquely intersected framed underpass bridge constructed with jacking method.
借助大型有限元分析软件，对大跨度斜交顶进框架式地道桥底板下开挖地铁对地道桥结构的影响进行较深入的探讨。
应用推荐