A theoretical study on ultrasonic guide waves generated by a pulsed laser was presented, using the finite element method (FEM).
利用有限元法(FEM)对板状金属材料中脉冲激光激发的超声导波进行了理论研究。
A numerical model, based on the finite element method, is established to describe a fluid flow in a deforming saturated oil reservoir.
利用有限元方法,建立了一个描述可变形饱和储层中流体流动的数值模型。
The analyzed result coincides with the experimental result, so the finite element method can be used for the optimal design of rubber damp.
分析结果与试验结果能很好的吻合,因此有限元方法可以用来指导橡胶缓冲器的优化设计。
Essentially, the finite element method is a numerical technique for the variational problems, which is a general approach to physical problems.
有限元法实质上是变分问题的一种数值解法,是物理问题的通用计算方法。
Because of its adaptation to shape and high precision, the finite element method has a more and more important role in the analysis of optical waveguides.
作为一种重要的数值分析方法,有限元法凭借其对光波导任意形状的适应性、高的计算精度等特点,将在光波导分析中起到越来越重要的作用。
Based on the finite element method, a spring element model is used.
本文在有限元法的基础上利用弹簧单元模型来分析。
It compares the rigid limit equilibrium method with the finite element method.
比较了有限元法和刚体极限平衡法的优缺点。
In this paper, the finite element method for U shape yieldable steel ribs is presented.
本文提出采用有限元法对U型钢可缩性支架进行计算。
At last, energy-dissipation of the KBF has been analyzed with the finite element method.
最后,用有限元方法对隅撑—支撑框架的耗能性能进行了分析。
Magnetic fluid seal structure is analyzed by the finite element method (FEM) in this article.
本文利用有限元数值计算方法对磁流体密封结构进行了分析。
It is effective to apply the finite element method to transient response analysis for impact problem.
我们认为用有限元方法分析瞬态冲击问题是行之有效的。
This paper develops the way of optimizing vehicle interior noise while the finite element method is employed.
初步探索了利用有限元方法进行汽车室内噪声优化的基本方法。
Numerical results for symmetric structure are in good agreement with that obtained by the finite element method.
对称三层非线性平面光波导的数值计算实例与有限元法的结果完全一致。
In addition, the coupling stiffness of the double rotors was successfully calculated with the finite element method.
文中还利用有限元法有效地解决了主轴双转子耦合刚度的计算问题。
This paper presents the stress field research of the blade of pipe cutting machine by SAP5 of the finite element method.
本文使用有限元线性系统静动力结构分析程序(SAP5)对管材剪切机刀片应力场进行了研究。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法,分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法,建立了横流式农用清选风机内部的气体流动数值模拟模型。
By using this method, the characteristics of propagation for diffused planar waveguides are calculated and compared with the finite element method.
给出了公式推导,计算了扩散各向同性及扩散各向异性平面光波导的传播特性,并与其它方法所得结果进行了比较。
As a numeric analysis method, the finite element method has been becoming a more and more important action in analysis of gear transmission system.
有限元方法作为一个强有力的数值分析工具,在齿轮传动系统的分析中起到了越来越大的作用。
The dynamic characteristic of monolayer plate is analyzed by the finite element method, and relevant finite element computation program is compiled.
用有限元方法对单层板结构进行了动态特性分析,并编制了相应的有限元动力计算程序。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
A mathematical model for determining the thermal influence zone of buried hot oil pipeline was developed and solved numerically by the finite element method.
建立了埋地热油管道热力影响区的数学模型,并用有限元法进行了求解。
For the plates with finite dimensions, the finite element method is used to obtain the stress distribution and stress concentration around the ovaloid opening.
对于有限尺寸板内开孔的情形,文中用有限单元法来分析腰圆形孔口的应力分布和应力集中。
The results obtained by the EFG method are finally compared with those obtained by the finite element method, concluding that the former is of greater accuracy.
将所得结果与有限元法所得结果进行了比较,发现efg法具有比有限元法更高的精度。
According to the measured results, a reasonable boundary condition can be set up and then the field distribution can be calculated by using the finite element method.
按测量结果,确定了一个合理的边界条件,用有限元法模拟计算了沿轴场分布。
In numerical computation by the finite element method it is also convenient to use the loading-unloading criteria and the constitutive equations formulated in strain space.
在有限元方法的数值计算中使用应变空间表述的加-卸载准则和本构方程也是很方便的。
In numerical computation by the finite element method it is also convenient to use the loading-unloading criteria and the constitutive equations formulated in strain space.
在有限元方法的数值计算中使用应变空间表述的加-卸载准则和本构方程也是很方便的。
应用推荐